[Sat May  4 17:11:18 2013] Detection parameters:
  Position = (279.7, 403.1) = 18 18 38.01 -13 47 47.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 276.3 +/- 29.5
  Background counts = 232.9
  Rate = 0.005 +/- 0.0005

[Sat May  4 17:11:19 2013] Off-axis axis estimate = 7.71'
[Sat May  4 17:12:45 2013] Using EEF radius (= 10.28 ")to estimate initial spatial extent for simple fitting
[Sat May  4 17:12:45 2013] Initial guess for spatial extent in simple fitting = 10.28"
[Sat May  4 17:12:45 2013] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.914
[Sat May  4 17:12:45 2013] Giving source the simple spatial ID 78 for pass 0, mean size = 10.28"
[Sat May  4 17:12:47 2013] fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_src78.ximg exists
[Sat May  4 17:12:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_src78.csv
[Sat May  4 17:12:47 2013] fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_src78_1.ximg exists
[Sat May  4 17:12:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_src78.csv
[Sat May  4 17:12:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_src78_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 17:12:49 2013] fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src78.ximg exists
[Sat May  4 17:12:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src78.csv
[Sat May  4 17:12:49 2013] fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src78_1.ximg exists
[Sat May  4 17:12:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src78.csv
[Sat May  4 17:12:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src78_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 17:13:13 2013] Warning, spatial fit 78 centroid is now closest to src. 15
[Sat May  4 17:13:13 2013] Vigneting correction estimate = 1.000000
[Sat May  4 17:13:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 17:13:13 2013] Assessing source extent using major
[Sat May  4 17:13:13 2013] Source does appear to be extended
[Sat May  4 17:13:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 17:13:13 2013] Source is confused with source 15
[Sat May  4 17:13:13 2013] Source is confused with source 33
[Sat May  4 17:14:21 2013] Using EEF radius (= 10.28 ")to estimate initial spatial extent for simple fitting
[Sat May  4 17:14:21 2013] Initial guess for spatial extent in simple fitting = 10.28"
[Sat May  4 17:14:21 2013] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.914
[Sat May  4 17:14:21 2013] Giving source the simple spatial ID 77 for pass 1, mean size = 10.28"
[Sat May  4 17:14:23 2013] fullrun_pn_xmm0605130101_pi300-10000_cl_pass1_src77.ximg exists
[Sat May  4 17:14:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605130101_pi300-10000_cl_pass1_src77.csv
[Sat May  4 17:14:23 2013] fullrun_pn_xmm0605130101_pi300-10000_cl_pass1_src77_1.ximg exists
[Sat May  4 17:14:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605130101_pi300-10000_cl_pass1_src77.csv
[Sat May  4 17:14:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0605130101_pi300-10000_cl_pass1_src77_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0605130101_pi300-10000_cl_pass1_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 17:14:24 2013] fullrun_pn_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Sat May  4 17:14:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src77.csv
[Sat May  4 17:14:24 2013] fullrun_pn_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Sat May  4 17:14:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src77.csv
[Sat May  4 17:14:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src77_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 17:14:48 2013] Warning, spatial fit 77 centroid is now closest to src. 89
[Sat May  4 17:14:48 2013] Vigneting correction estimate = 1.000000
[Sat May  4 17:14:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 17:14:48 2013] Assessing source extent using major
[Sat May  4 17:14:48 2013] Source does appear to be extended
[Sat May  4 17:14:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 17:15:58 2013] XMMSAS src. selection expression = ellipse(24289.354401, 35022.971436, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May  4 17:15:58 2013] Not overwriting source region fullrun_pn_xmm0605130101_pi300-10000_pass1_cl_src80_src.reg
[Sat May  4 17:15:58 2013] Extracting stamp from image fullrun_pn_xmm0605130101_pi300-10000_cl_sm2.00.img.gz, (242, 366) - (317, 441)
[Sat May  4 17:15:58 2013] XMMSAS bgd. selection expression = annulus(24289.354401, 35022.971436, 1087.500000, 2175.000000, X, Y) && !ellipse(26850.783080, 37681.608200, 534.973615, 322.175209, 331.299300, X, Y) && !ellipse(24003.009491, 36920.390778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22357.078000, 36848.726000, 279.311208, 279.311208, 0.000000, X, Y) && !ellipse(23200.051636, 36847.807587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22983.579132, 36139.732513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22188.532600, 36539.454000, 1761.032051, 695.875220, 108.150900, X, Y) && !ellipse(23906.301600, 35723.264000, 334.847210, 334.847210, 0.000000, X, Y) && !ellipse(22191.070000, 35455.664000, 494.652014, 212.086406, 337.628000, X, Y) && !ellipse(22351.596000, 34853.860400, 333.720810, 333.720810, 0.000000, X, Y) && !ellipse(23530.108200, 35283.380600, 1642.928047, 565.616016, 18.883300, X, Y) && !ellipse(21299.890976, 33347.908142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24604.211670, 37812.775330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24095.983307, 36230.712402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24435.473938, 35538.689636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22380.758000, 34230.642000, 748.460822, 268.717608, 105.479500, X, Y) && !ellipse(23764.802200, 33847.990400, 589.200017, 301.742409, 87.395710, X, Y) && !ellipse(21696.264282, 32901.287079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24017.184692, 32515.152893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26098.199310, 37035.350891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26161.335907, 35803.534119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26006.481323, 33786.253479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22982.673400, 33631.152000, 760.238422, 760.238422, 0.000000, X, Y) && !ellipse(23213.138275, 33135.704926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22301.580000, 33030.266000, 382.959211, 382.959211, 0.000000, X, Y) && !ellipse(22868.460000, 32414.236000, 540.765616, 540.765616, 0.000000, X, Y) && !ellipse(21989.688828, 32121.045654, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  4 17:15:58 2013] Writing fullrun_pn_xmm0605130101_pi300-10000_pass1_cl_src80.gif
[Sat May  4 17:16:11 2013] ../../xmm0605130101/products/events/fullrun_pn_xmm0605130101_pi300-10000_pass1_cl_src80_src.evt and ../../xmm0605130101/products/events/fullrun_pn_xmm0605130101_pi300-10000_pass1_cl_src80_bgd.evt exist, delete to re-create
[Sat May  4 17:16:11 2013] Mean detx,y = (-3221.12, -7503.18) 
[Sat May  4 17:16:11 2013] ../../xmm0605130101/products/images/fullrun_pn_xmm0605130101_pi300-10000_pass1_cl_src80_src.img and ../../xmm0605130101/products/images/fullrun_pn_xmm0605130101_pi300-10000_pass1_cl_src80_bgd.img exist, delete to re-create
[Sat May  4 17:16:11 2013] ../../xmm0605130101/products/spectra/fullrun_pn_xmm0605130101_pi300-10000_pass1_cl_src80_src.pi and ../../xmm0605130101/products/spectra/fullrun_pn_xmm0605130101_pi300-10000_pass1_cl_src80_bgd.pi exist, delete to re-create
[Sat May  4 17:16:11 2013] Setting source spectrum file to fullrun_pn_xmm0605130101_pi300-10000_pass1_cl_src80_src.pi.gz
[Sat May  4 17:16:11 2013] Setting bgd. spectrum file to fullrun_pn_xmm0605130101_pi300-10000_pass1_cl_src80_bgd.pi.gz
[Sat May  4 17:16:11 2013] ../../xmm0605130101/products/lightcurves/fullrun_pn_xmm0605130101_pi300-10000_pass1_cl_src80_src.lc and ../../xmm0605130101/products/lightcurves/fullrun_pn_xmm0605130101_pi300-10000_pass1_cl_src80_bgd.lc exist, delete to re-create
[Sat May  4 17:16:41 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May  4 17:16:41 2013] rmf not generated due to insufficient counts