[Sat May  4 17:11:16 2013] Detection parameters:
  Position = (282.0, 397.3) = 18 18 37.33 -13 48 11.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 252.0 +/- 25.7
  Background counts = 231.7
  Rate = 0.005 +/- 0.0005

[Sat May  4 17:11:19 2013] Off-axis axis estimate = 7.27'
[Sat May  4 17:12:45 2013] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Sat May  4 17:12:45 2013] Initial guess for spatial extent in simple fitting = 10.06"
[Sat May  4 17:12:45 2013] source mask rpix=2.3, npix_max = 31, mask sum = 17, frac = 0.537
[Sat May  4 17:12:45 2013] Giving source the simple spatial ID 34 for pass 0, mean size = 10.06"
[Sat May  4 17:12:47 2013] fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_src34.ximg exists
[Sat May  4 17:12:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_src34.csv
[Sat May  4 17:12:47 2013] fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_src34_1.ximg exists
[Sat May  4 17:12:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_src34.csv
[Sat May  4 17:12:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 17:12:48 2013] fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Sat May  4 17:12:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src34.csv
[Sat May  4 17:12:48 2013] fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Sat May  4 17:12:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src34.csv
[Sat May  4 17:12:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 17:13:13 2013] Source 36 is offset by -6.786032 and -2.097840 pixels which is larger than
2 X fitted extent = 1.229416 x 1.229416, not incorporating fit results
[Sat May  4 17:13:13 2013] Spatial fit model total counts = 2576.650000, observed total counts = 2570.000000
[Sat May  4 17:13:13 2013] Offset between fit and detection position for source 36 = 0.804868 pixels
[Sat May  4 17:13:13 2013] Warning, changing simple spatial fit ID from 34 to 36
[Sat May  4 17:13:13 2013] 2586.354100 total counts/ 2546.560000 bgd. counts: snr = 0.788573
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.804868 pixels
  Position = (282.7, 397.7) = 18 18 37.12 -13 48 9.0
  Extent = 6.1 (3.0-10.4)", rotation angle = 0
  Source counts = 39.8 +/- 50.9
  Background counts = 2546.6
  Rate = 0.0009 +/- 0.001
  Deleting source due to low Poisson probability