[Sat May  4 17:11:26 2013] Detection parameters:
  Position = (285.2, 398.6) = 18 18 36.37 -13 48 0.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1251.5 +/- 43.5
  Background counts = 63.6
  Rate = 0.04 +/- 0.001

[Sat May  4 17:11:33 2013] Off-axis axis estimate = 7.32'
[Sat May  4 17:12:52 2013] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Sat May  4 17:12:52 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May  4 17:12:52 2013] Initial guess for spatial extent in simple fitting = 10.09"
[Sat May  4 17:12:52 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.943
[Sat May  4 17:12:52 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 10.09"
[Sat May  4 17:12:53 2013] fullrun_mos2_xmm0605130101_pi300-10000_cl_pass0_src1.ximg exists
[Sat May  4 17:12:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605130101_pi300-10000_cl_pass0_src1.csv
[Sat May  4 17:12:53 2013] fullrun_mos2_xmm0605130101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat May  4 17:12:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605130101_pi300-10000_cl_pass0_src1.csv
[Sat May  4 17:12:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0605130101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0605130101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 17:12:54 2013] fullrun_mos2_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat May  4 17:12:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat May  4 17:12:54 2013] fullrun_mos2_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat May  4 17:12:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat May  4 17:12:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 17:13:39 2013] Warning, spatial fit 1 centroid is now closest to src. 250
[Sat May  4 17:13:40 2013] Vigneting correction estimate = 1.000000
[Sat May  4 17:13:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 17:13:40 2013] Assessing source extent using major
[Sat May  4 17:13:40 2013] Source does appear to be extended
[Sat May  4 17:13:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 17:13:40 2013] Source is confused with source 48
[Sat May  4 17:14:27 2013] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Sat May  4 17:14:27 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May  4 17:14:27 2013] Initial guess for spatial extent in simple fitting = 10.09"
[Sat May  4 17:14:27 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.943
[Sat May  4 17:14:27 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 10.09"
[Sat May  4 17:14:28 2013] fullrun_mos2_xmm0605130101_pi300-10000_cl_pass1_src1.ximg exists
[Sat May  4 17:14:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605130101_pi300-10000_cl_pass1_src1.csv
[Sat May  4 17:14:28 2013] fullrun_mos2_xmm0605130101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat May  4 17:14:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605130101_pi300-10000_cl_pass1_src1.csv
[Sat May  4 17:14:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0605130101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0605130101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 17:14:29 2013] fullrun_mos2_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat May  4 17:14:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat May  4 17:14:29 2013] fullrun_mos2_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat May  4 17:14:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat May  4 17:14:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 17:15:14 2013] Spatial fit model total counts = 3847.330000, observed total counts = 2933.000000
[Sat May  4 17:15:14 2013] Poor agreement between spatial fit and data for source 53
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May  4 17:15:15 2013] Vigneting correction estimate = 1.000000
[Sat May  4 17:15:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 17:15:15 2013] Assessing source extent using major
[Sat May  4 17:15:15 2013] Source does appear to be extended
[Sat May  4 17:15:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 17:17:15 2013] Counts = 1251.525269, rescaling region sizes by 2.000000
[Sat May  4 17:17:15 2013] XMMSAS src. selection expression = ellipse(24766.046326, 34629.764252, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat May  4 17:17:15 2013] Not overwriting source region fullrun_mos2_xmm0605130101_pi300-10000_pass1_cl_src53_src.reg
[Sat May  4 17:17:15 2013] Extracting stamp from image fullrun_mos2_xmm0605130101_pi300-10000_cl_sm2.00.img.gz, (210, 324) - (360, 474)
[Sat May  4 17:17:15 2013] XMMSAS bgd. selection expression = annulus(24766.046326, 34629.764252, 4350.000000, 8700.000000, X, Y) && !ellipse(34012.002655, 27500.460999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35246.286600, 30132.115200, 1939.472056, 242.434407, 311.731800, X, Y) && !ellipse(35032.013200, 29885.740360, 1683.480048, 238.692007, 129.526900, X, Y) && !ellipse(34706.672000, 29453.427400, 1973.448057, 316.263209, 126.560000, X, Y) && !ellipse(32538.447400, 32465.654200, 2026.288058, 414.484012, 312.022700, X, Y) && !ellipse(24863.793884, 35223.147369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31906.837400, 31659.393800, 1586.792046, 475.985614, 125.758900, X, Y) && !ellipse(35177.497200, 24032.852800, 1912.824055, 239.103207, 95.561690, X, Y) && !ellipse(31169.994200, 25056.441400, 1587.304046, 205.927206, 98.090430, X, Y) && !ellipse(33416.341000, 26556.806800, 1723.616050, 526.500815, 90.000000, X, Y) && !ellipse(31824.904000, 31535.187400, 1552.128045, 528.923215, 123.460000, X, Y) && !ellipse(35234.617600, 24512.255200, 1864.208054, 233.025607, 98.154560, X, Y) && !ellipse(33842.302600, 32271.625600, 1702.096049, 217.906406, 316.450000, X, Y) && !ellipse(31285.710500, 25726.577800, 1586.400046, 202.525606, 101.455100, X, Y) && !ellipse(31569.075800, 26863.785600, 1409.704041, 204.484806, 107.218400, X, Y) && !ellipse(33726.108700, 33884.424000, 781.446422, 312.071209, 321.952000, X, Y) && !ellipse(33540.657959, 26914.150879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23283.352600, 35349.898600, 1690.456049, 524.846415, 18.756600, X, Y) && !ellipse(32681.315247, 29355.341461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23742.463501, 35252.668640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25834.844299, 38090.817963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32334.868920, 28739.975520, 1492.200043, 210.092806, 297.427700, X, Y) && !ellipse(31788.718292, 27515.175171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23996.334747, 36926.011475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31451.368000, 31014.716000, 2062.776059, 918.552026, 130.362200, X, Y) && !ellipse(22128.487122, 36234.254211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31176.938477, 27805.879639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32055.064000, 28169.134000, 389.157611, 181.975205, 300.414000, X, Y) && !ellipse(23884.074799, 35723.461090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23193.122009, 36842.956848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30569.858063, 25267.448608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22232.237701, 35523.457733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30751.523132, 26225.935425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30924.108002, 27025.874512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31074.353455, 27410.174072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30816.170000, 30384.240000, 1523.856044, 1523.856044, 0.000000, X, Y) && !ellipse(30629.885620, 25698.049225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33979.255524, 25438.132477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22229.260000, 36613.054000, 1761.352051, 783.115223, 90.000000, X, Y) && !ellipse(34086.630219, 25873.453735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21728.283936, 32923.809692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24479.943024, 36495.371033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25664.109985, 27325.083038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30498.692657, 29960.603180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23775.438965, 33802.141174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22948.431854, 36151.858032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32215.713379, 34775.212067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23978.543396, 32521.081573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21198.865784, 37079.065948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31901.689789, 37692.882172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22308.922913, 33023.880402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18966.282181, 34128.247803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17404.266052, 31196.410461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22167.518707, 33991.261566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22989.290100, 33701.677521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26042.109161, 35832.580139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26882.072815, 37700.353424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24550.513702, 37774.046417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26502.185913, 30170.308014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21925.017624, 26805.215027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33263.528656, 34441.092560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22073.335526, 30176.417236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17380.121216, 38063.091492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25599.045837, 37081.760803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26238.987549, 38359.578613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24281.718536, 33645.417450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32858.734924, 33957.643585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18045.800781, 37544.561615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26320.714661, 40573.942078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25992.712341, 33757.799530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27476.605560, 38408.816132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21957.377121, 25882.385254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23618.882507, 37147.945374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25020.265381, 38073.711609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23712.443085, 37951.683807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20117.545364, 36061.703857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18865.276901, 35446.172485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24337.575043, 29991.499756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23471.217743, 33282.050140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24475.450714, 38146.039917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21032.210922, 29133.962463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22880.274597, 32426.235962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22393.883850, 27825.564026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17905.943130, 36963.189850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20780.243332, 33630.190857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24168.287720, 30935.309570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19208.854950, 36112.197205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25622.349030, 40536.726532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25400.141663, 39134.013489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20863.762589, 36046.856934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26172.367554, 36992.387207, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  4 17:17:15 2013] Writing fullrun_mos2_xmm0605130101_pi300-10000_pass1_cl_src53.gif
[Sat May  4 17:17:45 2013] ../../xmm0605130101/products/events/fullrun_mos2_xmm0605130101_pi300-10000_pass1_cl_src53_src.evt and ../../xmm0605130101/products/events/fullrun_mos2_xmm0605130101_pi300-10000_pass1_cl_src53_bgd.evt exist, delete to re-create
[Sat May  4 17:17:45 2013] Mean detx,y = (3157.98, 7122.24) 
[Sat May  4 17:17:45 2013] ../../xmm0605130101/products/images/fullrun_mos2_xmm0605130101_pi300-10000_pass1_cl_src53_src.img and ../../xmm0605130101/products/images/fullrun_mos2_xmm0605130101_pi300-10000_pass1_cl_src53_bgd.img exist, delete to re-create
[Sat May  4 17:17:45 2013] ../../xmm0605130101/products/spectra/fullrun_mos2_xmm0605130101_pi300-10000_pass1_cl_src53_src.pi and ../../xmm0605130101/products/spectra/fullrun_mos2_xmm0605130101_pi300-10000_pass1_cl_src53_bgd.pi exist, delete to re-create
[Sat May  4 17:17:45 2013] Setting source spectrum file to fullrun_mos2_xmm0605130101_pi300-10000_pass1_cl_src53_src.pi.gz
[Sat May  4 17:17:45 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0605130101_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Sat May  4 17:17:45 2013] ../../xmm0605130101/products/lightcurves/fullrun_mos2_xmm0605130101_pi300-10000_pass1_cl_src53_src.lc and ../../xmm0605130101/products/lightcurves/fullrun_mos2_xmm0605130101_pi300-10000_pass1_cl_src53_bgd.lc exist, delete to re-create