[Sat May  4 17:11:31 2013] Detection parameters:
  Position = (427.2, 158.0) = 18 17 53.92 -14 5 33.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 779.0 +/- 38.4
  Background counts = 42.3
  Rate = 0.01 +/- 0.0007

[Sat May  4 17:11:33 2013] Off-axis axis estimate = 13.82'
[Sat May  4 17:12:52 2013] Using EEF radius (= 13.34 ")to estimate initial spatial extent for simple fitting
[Sat May  4 17:12:52 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May  4 17:12:52 2013] Initial guess for spatial extent in simple fitting = 13.34"
[Sat May  4 17:12:52 2013] source mask rpix=3.1, npix_max = 50, mask sum = 55, frac = 1.081
[Sat May  4 17:12:52 2013] Giving source the simple spatial ID 61 for pass 0, mean size = 13.34"
[Sat May  4 17:12:54 2013] fullrun_mos2_xmm0605130101_pi300-10000_cl_pass0_src61.ximg exists
[Sat May  4 17:12:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605130101_pi300-10000_cl_pass0_src61.csv
[Sat May  4 17:12:54 2013] fullrun_mos2_xmm0605130101_pi300-10000_cl_pass0_src61_1.ximg exists
[Sat May  4 17:12:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605130101_pi300-10000_cl_pass0_src61.csv
[Sat May  4 17:12:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0605130101_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0605130101_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 17:12:55 2013] fullrun_mos2_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Sat May  4 17:12:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src61.csv
[Sat May  4 17:12:55 2013] fullrun_mos2_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Sat May  4 17:12:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src61.csv
[Sat May  4 17:12:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 17:13:40 2013] Warning, spatial fit 61 centroid is now closest to src. 102
[Sat May  4 17:13:40 2013] Vigneting correction estimate = 1.000000
[Sat May  4 17:13:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 17:13:40 2013] Assessing source extent using major
[Sat May  4 17:13:40 2013] Source does appear to be extended
[Sat May  4 17:13:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 17:13:40 2013] Source is confused with source 1
[Sat May  4 17:14:27 2013] Using EEF radius (= 13.34 ")to estimate initial spatial extent for simple fitting
[Sat May  4 17:14:27 2013] Initial guess for spatial extent in simple fitting = 13.34"
[Sat May  4 17:14:27 2013] source mask rpix=3.1, npix_max = 50, mask sum = 55, frac = 1.081
[Sat May  4 17:14:27 2013] Giving source the simple spatial ID 61 for pass 1, mean size = 13.34"
[Sat May  4 17:14:29 2013] fullrun_mos2_xmm0605130101_pi300-10000_cl_pass1_src61.ximg exists
[Sat May  4 17:14:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605130101_pi300-10000_cl_pass1_src61.csv
[Sat May  4 17:14:29 2013] fullrun_mos2_xmm0605130101_pi300-10000_cl_pass1_src61_1.ximg exists
[Sat May  4 17:14:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605130101_pi300-10000_cl_pass1_src61.csv
[Sat May  4 17:14:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0605130101_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0605130101_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 17:14:30 2013] fullrun_mos2_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Sat May  4 17:14:30 2013] fullrun_mos2_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Sat May  4 17:14:30 2013] Fit fullrun_mos2_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src61 appears to have run properly
[Sat May  4 17:15:15 2013] Spatial fit model total counts = 2504.050000, observed total counts = 2266.000000
[Sat May  4 17:15:15 2013] Poor agreement between spatial fit and data for source 229
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May  4 17:15:15 2013] Vigneting correction estimate = 1.000000
[Sat May  4 17:15:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 17:15:15 2013] Assessing source extent using major
[Sat May  4 17:15:15 2013] Source does appear to be extended
[Sat May  4 17:15:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 17:17:29 2013] XMMSAS src. selection expression = ellipse(37120.125977, 13694.325912, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May  4 17:17:29 2013] Not overwriting source region fullrun_mos2_xmm0605130101_pi300-10000_pass1_cl_src229_src.reg
[Sat May  4 17:17:29 2013] Extracting stamp from image fullrun_mos2_xmm0605130101_pi300-10000_cl_sm2.00.img.gz, (390, 120) - (465, 195)
[Sat May  4 17:17:29 2013] XMMSAS bgd. selection expression = annulus(37120.125977, 13694.325912, 1087.500000, 2175.000000, X, Y) && !ellipse(36009.130800, 13326.354600, 2255.752065, 296.603209, 41.909600, X, Y) && !ellipse(33286.183200, 15507.103600, 1879.112054, 234.888807, 52.270600, X, Y) && !ellipse(33693.349000, 15797.624800, 2104.992061, 263.124008, 53.321000, X, Y) && !ellipse(36260.158200, 17490.724200, 1914.448055, 239.305607, 65.295100, X, Y) && !ellipse(36661.048000, 16452.904000, 1011.808029, 773.000022, 90.000000, X, Y) && !ellipse(33570.026600, 12228.271200, 2589.064074, 514.626415, 40.407500, X, Y) && !ellipse(35446.515200, 15538.216600, 1962.280056, 250.452807, 53.118200, X, Y) && !ellipse(35899.598389, 14994.605270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34725.722000, 16704.854000, 1888.536054, 1046.496030, 71.999300, X, Y) && !ellipse(34318.501000, 14766.222000, 2199.336063, 1034.440030, 34.910000, X, Y) && !ellipse(38861.586243, 15344.086777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38160.172638, 16141.038956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35876.778412, 12610.270813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37313.589996, 15526.407639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37765.937958, 15107.844925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38455.459686, 14482.385071, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  4 17:17:29 2013] Writing fullrun_mos2_xmm0605130101_pi300-10000_pass1_cl_src229.gif