[Sat May  4 17:11:20 2013] Detection parameters:
  Position = (495.2, 305.1) = 18 17 33.65 -13 54 49.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 777.3 +/- 40.0
  Background counts = 40.1
  Rate = 0.01 +/- 0.0007

[Sat May  4 17:11:24 2013] Off-axis axis estimate = 14.27'
[Sat May  4 17:12:49 2013] Using EEF radius (= 13.56 ")to estimate initial spatial extent for simple fitting
[Sat May  4 17:12:49 2013] Initial guess for spatial extent in simple fitting = 13.56"
[Sat May  4 17:12:49 2013] source mask rpix=3.1, npix_max = 52, mask sum = 52, frac = 0.993
[Sat May  4 17:12:49 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 13.56"
[Sat May  4 17:12:50 2013] fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_src12.ximg exists
[Sat May  4 17:12:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_src12.csv
[Sat May  4 17:12:50 2013] fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_src12_1.ximg exists
[Sat May  4 17:12:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_src12.csv
[Sat May  4 17:12:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 17:12:51 2013] fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sat May  4 17:12:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sat May  4 17:12:51 2013] fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sat May  4 17:12:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sat May  4 17:12:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 17:13:26 2013] Warning, spatial fit 12 centroid is now closest to src. 13
[Sat May  4 17:13:26 2013] Vigneting correction estimate = 1.000000
[Sat May  4 17:13:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 17:13:26 2013] Assessing source extent using major
[Sat May  4 17:13:26 2013] Source does appear to be extended
[Sat May  4 17:13:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 17:13:26 2013] Source is confused with source 5
[Sat May  4 17:14:24 2013] Using EEF radius (= 13.56 ")to estimate initial spatial extent for simple fitting
[Sat May  4 17:14:24 2013] Initial guess for spatial extent in simple fitting = 13.56"
[Sat May  4 17:14:24 2013] source mask rpix=3.1, npix_max = 52, mask sum = 52, frac = 0.993
[Sat May  4 17:14:24 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 13.56"
[Sat May  4 17:14:25 2013] fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_src12.ximg exists
[Sat May  4 17:14:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_src12.csv
[Sat May  4 17:14:25 2013] fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_src12_1.ximg exists
[Sat May  4 17:14:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_src12.csv
[Sat May  4 17:14:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 17:14:26 2013] fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sat May  4 17:14:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Sat May  4 17:14:26 2013] fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sat May  4 17:14:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Sat May  4 17:14:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 17:15:01 2013] Warning, spatial fit 12 centroid is now closest to src. 13
[Sat May  4 17:15:01 2013] Source 7 is offset by 2.149128 and 7.127788 pixels which is larger than
2 X fitted extent = 1.504258 x 1.504258, not incorporating fit results
[Sat May  4 17:15:01 2013] Vigneting correction estimate = 1.000000
[Sat May  4 17:15:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 17:15:01 2013] Assessing source extent using major
[Sat May  4 17:15:01 2013] Source does appear to be extended
[Sat May  4 17:15:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 17:16:47 2013] XMMSAS src. selection expression = ellipse(43032.438141, 26494.653595, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May  4 17:16:47 2013] Not overwriting source region fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src7_src.reg
[Sat May  4 17:16:47 2013] Extracting stamp from image fullrun_mos1_xmm0605130101_pi300-10000_cl_sm2.00.img.gz, (458, 268) - (533, 343)
[Sat May  4 17:16:47 2013] XMMSAS bgd. selection expression = annulus(43032.438141, 26494.653595, 1087.500000, 2175.000000, X, Y) && !ellipse(43454.708400, 24617.183200, 2110.536061, 310.628009, 108.474100, X, Y) && !ellipse(42665.364000, 25930.772000, 2132.568061, 266.571208, 105.181800, X, Y) && !ellipse(43454.989200, 24626.444000, 2208.912064, 276.114408, 108.140500, X, Y) && !ellipse(43284.584000, 22210.547600, 2425.064070, 303.133609, 83.466520, X, Y) && !ellipse(41724.333200, 29742.393400, 2597.080075, 468.017613, 322.776600, X, Y) && !ellipse(44075.856689, 25600.622925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41771.430400, 29776.082400, 2652.152076, 475.120014, 323.788900, X, Y) && !ellipse(41211.066803, 25879.929352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41865.361603, 26902.405029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40371.942139, 28487.340698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40571.810920, 24059.565400, 2265.392065, 283.173608, 102.165700, X, Y) && !ellipse(40764.867889, 24766.625122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42455.407349, 25100.266724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40419.238000, 22737.196400, 2019.040058, 252.380007, 91.211060, X, Y) && !ellipse(41744.616000, 23983.722000, 2136.408061, 2136.408061, 0.000000, X, Y) && !ellipse(40768.760000, 28963.612000, 2007.464058, 250.933607, 130.837500, X, Y) && !ellipse(42394.556732, 24581.325317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38804.686460, 22224.534200, 2348.624068, 440.116013, 80.442540, X, Y) && !ellipse(43596.584076, 27659.045898, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  4 17:16:47 2013] Writing fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src7.gif
[Sat May  4 17:16:52 2013] ../../xmm0605130101/products/events/fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src7_src.evt and ../../xmm0605130101/products/events/fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src7_bgd.evt exist, delete to re-create
[Sat May  4 17:16:52 2013] Mean detx,y = (370.38, 15570.94) 
[Sat May  4 17:16:52 2013] ../../xmm0605130101/products/images/fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src7_src.img and ../../xmm0605130101/products/images/fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src7_bgd.img exist, delete to re-create
[Sat May  4 17:16:52 2013] ../../xmm0605130101/products/spectra/fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src7_src.pi and ../../xmm0605130101/products/spectra/fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src7_bgd.pi exist, delete to re-create
[Sat May  4 17:16:52 2013] Setting source spectrum file to fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src7_src.pi.gz
[Sat May  4 17:16:52 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat May  4 17:16:52 2013] ../../xmm0605130101/products/lightcurves/fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src7_src.lc and ../../xmm0605130101/products/lightcurves/fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src7_bgd.lc exist, delete to re-create
[Sat May  4 17:17:06 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May  4 17:17:06 2013] rmf not generated due to insufficient counts