[Sat May  4 17:11:20 2013] Detection parameters:
  Position = (498.1, 253.3) = 18 17 32.76 -13 58 37.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1000.7 +/- 38.4
  Background counts = 45.4
  Rate = 0.02 +/- 0.0007

[Sat May  4 17:11:24 2013] Off-axis axis estimate = 14.84'
[Sat May  4 17:12:49 2013] Using EEF radius (= 13.85 ")to estimate initial spatial extent for simple fitting
[Sat May  4 17:12:49 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May  4 17:12:49 2013] Initial guess for spatial extent in simple fitting = 13.85"
[Sat May  4 17:12:49 2013] source mask rpix=3.2, npix_max = 54, mask sum = 45, frac = 0.829
[Sat May  4 17:12:49 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 13.85"
[Sat May  4 17:12:50 2013] fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_src7.ximg exists
[Sat May  4 17:12:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_src7.csv
[Sat May  4 17:12:50 2013] fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_src7_1.ximg exists
[Sat May  4 17:12:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_src7.csv
[Sat May  4 17:12:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 17:12:51 2013] fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sat May  4 17:12:51 2013] fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sat May  4 17:12:51 2013] Fit fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sat May  4 17:13:26 2013] Spatial fit model total counts = 3399.540000, observed total counts = 3134.000000
[Sat May  4 17:13:26 2013] Offset between fit and detection position for source 6 = 1.348475 pixels
[Sat May  4 17:13:26 2013] 2262.300000 total counts/ 1200.600000 bgd. counts: snr = 30.640980
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.348475 pixels
  Position = (498.9, 252.2) = 18 17 32.52 -13 58 41.6
  Extent = 8.6 (7.7-9.1)", rotation angle = 0
  Source counts = 1061.7 +/- 47.6
  Background counts = 1200.6
  Rate = 0.02 +/- 0.0009
[Sat May  4 17:13:26 2013] Vigneting correction estimate = 1.000000
[Sat May  4 17:13:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 17:13:26 2013] Assessing source extent using major axis lower bound
[Sat May  4 17:13:26 2013] Source does appear to be extended
[Sat May  4 17:13:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 17:13:26 2013] Source is confused with source 9
[Sat May  4 17:14:24 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May  4 17:14:24 2013] Initial guess for spatial extent in simple fitting = 8.57"
[Sat May  4 17:14:24 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.819
[Sat May  4 17:14:24 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 8.57"
[Sat May  4 17:14:25 2013] fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_src7.ximg exists
[Sat May  4 17:14:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_src7.csv
[Sat May  4 17:14:25 2013] fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_src7_1.ximg exists
[Sat May  4 17:14:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_src7.csv
[Sat May  4 17:14:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 17:14:26 2013] fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sat May  4 17:14:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sat May  4 17:14:26 2013] fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sat May  4 17:14:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sat May  4 17:14:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 17:15:01 2013] Warning, spatial fit 7 centroid is now closest to src. 3
[Sat May  4 17:15:01 2013] Vigneting correction estimate = 1.000000
[Sat May  4 17:15:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 17:15:01 2013] Assessing source extent using major axis lower bound
[Sat May  4 17:15:01 2013] Source does appear to be extended
[Sat May  4 17:15:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 17:16:46 2013] Counts = 1061.700000, rescaling region sizes by 2.000000
[Sat May  4 17:16:46 2013] XMMSAS src. selection expression = ellipse(43356.058400, 21892.527000, 1028.394030, 1028.394030, 0.000000, X, Y)
[Sat May  4 17:16:46 2013] Not overwriting source region fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src6_src.reg
[Sat May  4 17:16:46 2013] Extracting stamp from image fullrun_mos1_xmm0605130101_pi300-10000_cl_sm2.00.img.gz, (440, 193) - (558, 311)
[Sat May  4 17:16:47 2013] XMMSAS bgd. selection expression = annulus(43356.058400, 21892.527000, 3427.980099, 6855.960197, X, Y) && !ellipse(43454.708400, 24617.183200, 2110.536061, 310.628009, 108.474100, X, Y) && !ellipse(42665.364000, 25930.772000, 2132.568061, 266.571208, 105.181800, X, Y) && !ellipse(43454.989200, 24626.444000, 2208.912064, 276.114408, 108.140500, X, Y) && !ellipse(43284.584000, 22210.547600, 2425.064070, 303.133609, 83.466520, X, Y) && !ellipse(41724.333200, 29742.393400, 2597.080075, 468.017613, 322.776600, X, Y) && !ellipse(41864.525269, 18187.028427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42486.928200, 22073.654000, 2155.616062, 269.452008, 79.502300, X, Y) && !ellipse(43032.438141, 26494.653595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44075.856689, 25600.622925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40454.848200, 18174.452600, 2805.376081, 640.930418, 55.137000, X, Y) && !ellipse(40831.846313, 17767.467422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41771.430400, 29776.082400, 2652.152076, 475.120014, 323.788900, X, Y) && !ellipse(42682.529175, 21353.725677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39175.118200, 25937.116000, 1367.472039, 239.843207, 106.925400, X, Y) && !ellipse(41211.066803, 25879.929352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41865.361603, 26902.405029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41537.154846, 18658.142136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40371.942139, 28487.340698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40434.603485, 22224.785034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40571.810920, 24059.565400, 2265.392065, 283.173608, 102.165700, X, Y) && !ellipse(40407.902600, 18258.178000, 2785.920080, 671.379219, 53.457700, X, Y) && !ellipse(40466.538400, 21763.680400, 2044.856059, 255.607207, 82.366380, X, Y) && !ellipse(40764.867889, 24766.625122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42455.407349, 25100.266724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40419.238000, 22737.196400, 2019.040058, 252.380007, 91.211060, X, Y) && !ellipse(41744.616000, 23983.722000, 2136.408061, 2136.408061, 0.000000, X, Y) && !ellipse(38711.996582, 23083.071045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40768.760000, 28963.612000, 2007.464058, 250.933607, 130.837500, X, Y) && !ellipse(38866.070587, 21782.796997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42394.556732, 24581.325317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39013.785797, 25441.406128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38804.686460, 22224.534200, 2348.624068, 440.116013, 80.442540, X, Y) && !ellipse(43596.584076, 27659.045898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38630.896057, 23725.811157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38882.067139, 24440.051208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39957.699158, 16133.286270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37958.995758, 14250.389938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42015.997345, 19759.869110, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  4 17:16:47 2013] Writing fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src6.gif
[Sat May  4 17:16:52 2013] ../../xmm0605130101/products/events/fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src6_src.evt and ../../xmm0605130101/products/events/fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src6_bgd.evt exist, delete to re-create
[Sat May  4 17:16:52 2013] Mean detx,y = (-4010.70, 15913.03) 
[Sat May  4 17:16:52 2013] ../../xmm0605130101/products/images/fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src6_src.img and ../../xmm0605130101/products/images/fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src6_bgd.img exist, delete to re-create
[Sat May  4 17:16:52 2013] ../../xmm0605130101/products/spectra/fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src6_src.pi and ../../xmm0605130101/products/spectra/fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src6_bgd.pi exist, delete to re-create
[Sat May  4 17:16:52 2013] Setting source spectrum file to fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src6_src.pi.gz
[Sat May  4 17:16:52 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat May  4 17:16:52 2013] ../../xmm0605130101/products/lightcurves/fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src6_src.lc and ../../xmm0605130101/products/lightcurves/fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src6_bgd.lc exist, delete to re-create