[Sat May  4 17:11:20 2013] Detection parameters:
  Position = (497.2, 264.0) = 18 17 33.03 -13 57 49.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1288.1 +/- 45.9
  Background counts = 45.4
  Rate = 0.02 +/- 0.0008

[Sat May  4 17:11:24 2013] Off-axis axis estimate = 14.63'
[Sat May  4 17:12:49 2013] Using EEF radius (= 13.74 ")to estimate initial spatial extent for simple fitting
[Sat May  4 17:12:49 2013] Initial guess for spatial extent in simple fitting = 13.74"
[Sat May  4 17:12:49 2013] source mask rpix=3.2, npix_max = 53, mask sum = 50, frac = 0.934
[Sat May  4 17:12:49 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 13.74"
[Sat May  4 17:12:50 2013] fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_src6.ximg exists
[Sat May  4 17:12:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_src6.csv
[Sat May  4 17:12:50 2013] fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat May  4 17:12:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_src6.csv
[Sat May  4 17:12:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 17:12:51 2013] fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat May  4 17:12:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat May  4 17:12:51 2013] fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat May  4 17:12:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat May  4 17:12:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605130101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 17:13:26 2013] Warning, spatial fit 6 centroid is now closest to src. 2
[Sat May  4 17:13:26 2013] Vigneting correction estimate = 1.000000
[Sat May  4 17:13:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 17:13:26 2013] Assessing source extent using major
[Sat May  4 17:13:26 2013] Source does appear to be extended
[Sat May  4 17:13:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 17:13:26 2013] Source is confused with source 9
[Sat May  4 17:14:24 2013] Using EEF radius (= 13.74 ")to estimate initial spatial extent for simple fitting
[Sat May  4 17:14:24 2013] Initial guess for spatial extent in simple fitting = 13.74"
[Sat May  4 17:14:24 2013] source mask rpix=3.2, npix_max = 53, mask sum = 50, frac = 0.934
[Sat May  4 17:14:24 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 13.74"
[Sat May  4 17:14:25 2013] fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_src6.ximg exists
[Sat May  4 17:14:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_src6.csv
[Sat May  4 17:14:25 2013] fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat May  4 17:14:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_src6.csv
[Sat May  4 17:14:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 17:14:26 2013] fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat May  4 17:14:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat May  4 17:14:26 2013] fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat May  4 17:14:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat May  4 17:14:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605130101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 17:15:01 2013] Warning, spatial fit 6 centroid is now closest to src. 9
[Sat May  4 17:15:01 2013] Source 3 is offset by -0.416533 and 8.958042 pixels which is larger than
2 X fitted extent = 1.076874 x 7.880414, not incorporating fit results
[Sat May  4 17:15:01 2013] Spatial fit model total counts = 4120.420000, observed total counts = 3901.000000
[Sat May  4 17:15:01 2013] Offset between fit and detection position for source 3 = 8.203950 pixels
[Sat May  4 17:15:01 2013] Warning, changing simple spatial fit ID from 6 to 10
[Sat May  4 17:15:01 2013] 4025.340000 total counts/ 2882.100000 bgd. counts: snr = 21.295257
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 8.203950 pixels
  Position = (498.1, 255.9) = 18 17 32.77 -13 58 25.7
  Extent = 30.3 (28.5-60.6)", rotation angle = 83 (83-84) degrees
  Source counts = 1143.2 +/- 63.4
  Background counts = 2882.1
  Rate = 0.02 +/- 0.001
[Sat May  4 17:15:01 2013] Vigneting correction estimate = 1.000000
[Sat May  4 17:15:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 17:15:01 2013] Assessing source extent using major axis lower bound
[Sat May  4 17:15:01 2013] Source does appear to be extended
[Sat May  4 17:15:01 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 7.42
[Sat May  4 17:15:01 2013] Source is asymmetric
[Sat May  4 17:16:46 2013] Counts = 1143.240000, rescaling region sizes by 2.000000
[Sat May  4 17:16:46 2013] XMMSAS src. selection expression = ellipse(43284.584000, 22210.547600, 3637.596105, 454.700413, 83.466520, X, Y)
[Sat May  4 17:16:46 2013] Not overwriting source region fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src3_src.reg
[Sat May  4 17:16:46 2013] Extracting stamp from image fullrun_mos1_xmm0605130101_pi300-10000_cl_sm2.00.img.gz, (289, 47) - (595, 465)
[Sat May  4 17:16:46 2013] XMMSAS bgd. selection expression = annulus(43284.584000, 22210.547600, 12125.320349, 24250.640698, X, Y) && !ellipse(43454.708400, 24617.183200, 2110.536061, 310.628009, 108.474100, X, Y) && !ellipse(24764.410000, 34668.230000, 1650.616047, 304.487209, 102.280800, X, Y) && !ellipse(42665.364000, 25930.772000, 2132.568061, 266.571208, 105.181800, X, Y) && !ellipse(43454.989200, 24626.444000, 2208.912064, 276.114408, 108.140500, X, Y) && !ellipse(24907.370880, 35191.571106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43356.058400, 21892.527000, 685.596020, 685.596020, 0.000000, X, Y) && !ellipse(41724.333200, 29742.393400, 2597.080075, 468.017613, 322.776600, X, Y) && !ellipse(23752.769200, 35187.506600, 591.848017, 419.876012, 308.500000, X, Y) && !ellipse(41864.525269, 18187.028427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42486.928200, 22073.654000, 2155.616062, 269.452008, 79.502300, X, Y) && !ellipse(43032.438141, 26494.653595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44075.856689, 25600.622925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40454.848200, 18174.452600, 2805.376081, 640.930418, 55.137000, X, Y) && !ellipse(25836.920532, 38082.499756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40831.846313, 17767.467422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41771.430400, 29776.082400, 2652.152076, 475.120014, 323.788900, X, Y) && !ellipse(42682.529175, 21353.725677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39175.118200, 25937.116000, 1367.472039, 239.843207, 106.925400, X, Y) && !ellipse(24036.668100, 36927.664200, 1583.392046, 387.638411, 305.397000, X, Y) && !ellipse(41211.066803, 25879.929352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41865.361603, 26902.405029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41537.154846, 18658.142136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32288.028412, 32515.638763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23255.958588, 36834.296143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40371.942139, 28487.340698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23880.904694, 35707.661011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40434.603485, 22224.785034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40571.810920, 24059.565400, 2265.392065, 283.173608, 102.165700, X, Y) && !ellipse(40407.902600, 18258.178000, 2785.920080, 671.379219, 53.457700, X, Y) && !ellipse(40466.538400, 21763.680400, 2044.856059, 255.607207, 82.366380, X, Y) && !ellipse(40764.867889, 24766.625122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42455.407349, 25100.266724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40419.238000, 22737.196400, 2019.040058, 252.380007, 91.211060, X, Y) && !ellipse(41744.616000, 23983.722000, 2136.408061, 2136.408061, 0.000000, X, Y) && !ellipse(22226.492218, 35517.951202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26881.620000, 37685.763800, 597.874417, 597.874417, 0.000000, X, Y) && !ellipse(38711.996582, 23083.071045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40768.760000, 28963.612000, 2007.464058, 250.933607, 130.837500, X, Y) && !ellipse(23532.430000, 36199.706800, 1740.008050, 1056.880030, 0.000000, X, Y) && !ellipse(38866.070587, 21782.796997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23770.038635, 33734.578644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42394.556732, 24581.325317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39013.785797, 25441.406128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27487.895800, 38406.572400, 411.188012, 411.188012, 0.000000, X, Y) && !ellipse(22209.940000, 36767.116000, 1740.008050, 669.625619, 98.986690, X, Y) && !ellipse(21731.574000, 32898.798000, 296.080809, 296.080809, 0.000000, X, Y) && !ellipse(25654.795200, 27314.283000, 390.899211, 390.899211, 0.000000, X, Y) && !ellipse(22872.914856, 36144.163757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29458.942440, 24957.848200, 384.822411, 384.822411, 0.000000, X, Y) && !ellipse(22244.955292, 33893.484802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23983.125977, 32514.629852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38804.686460, 22224.534200, 2348.624068, 440.116013, 80.442540, X, Y) && !ellipse(24576.280100, 37731.359600, 376.588011, 246.181607, 137.311000, X, Y) && !ellipse(24147.363434, 36242.750305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43596.584076, 27659.045898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18983.660675, 34119.669403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25532.965600, 37123.023000, 1757.832051, 431.219212, 16.172500, X, Y) && !ellipse(23715.841522, 37963.955353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26161.158020, 35801.444611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38630.896057, 23725.811157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21323.595078, 33423.313629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31902.937653, 37683.671875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38024.713043, 33031.322449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30374.300600, 25368.260000, 1494.048043, 186.756005, 95.583580, X, Y) && !ellipse(20057.918716, 36000.585083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24890.819427, 36402.277740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23803.656616, 23438.080322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21446.075562, 34559.206848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32287.675293, 34774.338562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38882.067139, 24440.051208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22328.761292, 33031.601227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33284.660034, 14209.822418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42958.476990, 32204.963165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26499.733600, 30177.314600, 314.880328, 314.880328, 0.000000, X, Y) && !ellipse(39957.699158, 16133.286270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35610.946259, 31557.847565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34275.392181, 29486.361847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24316.851540, 29984.278600, 476.587214, 191.470406, 88.953060, X, Y) && !ellipse(22061.113100, 30160.896000, 657.392819, 280.382408, 72.068727, X, Y) && !ellipse(35514.202301, 13815.377991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25065.597351, 38118.637360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39507.446014, 29866.939056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21905.392200, 26776.027200, 441.241613, 441.241613, 0.000000, X, Y) && !ellipse(24333.924377, 33668.646301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20023.042400, 32594.375600, 689.253620, 492.727214, 44.482000, X, Y) && !ellipse(19166.865662, 36051.301453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35119.861420, 30691.978790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37958.995758, 14250.389938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24061.560180, 30979.855000, 908.968026, 390.898411, 33.730048, X, Y) && !ellipse(30388.745239, 36084.797302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22431.240800, 27870.953600, 392.504011, 392.504011, 0.000000, X, Y) && !ellipse(27724.937200, 36487.657200, 531.528015, 531.528015, 0.000000, X, Y) && !ellipse(19170.095505, 34698.710052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25056.482635, 37280.157867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27293.674042, 40619.627167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34496.914551, 29866.745239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30464.450745, 22571.263702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34271.537079, 15074.333145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40934.468506, 31182.232605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19902.619415, 24638.010193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33831.627930, 15522.123749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26366.248413, 40553.001862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18817.966934, 35315.343262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30473.756622, 26273.242737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30821.058350, 24992.207031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43533.455444, 32065.120117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20790.320496, 35953.628235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33475.976135, 15951.280029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24491.298584, 42019.260376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22867.681793, 37659.643860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35254.458130, 39659.743805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42015.997345, 19759.869110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19439.012802, 39296.344635, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  4 17:16:46 2013] Writing fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src3.gif
[Sat May  4 17:16:52 2013] ../../xmm0605130101/products/events/fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0605130101/products/events/fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sat May  4 17:16:52 2013] Mean detx,y = (-2264.13, 16183.68) 
[Sat May  4 17:16:52 2013] ../../xmm0605130101/products/images/fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src3_src.img and ../../xmm0605130101/products/images/fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Sat May  4 17:16:52 2013] ../../xmm0605130101/products/spectra/fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src3_src.pi and ../../xmm0605130101/products/spectra/fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sat May  4 17:16:52 2013] Setting source spectrum file to fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src3_src.pi.gz
[Sat May  4 17:16:52 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat May  4 17:16:52 2013] ../../xmm0605130101/products/lightcurves/fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0605130101/products/lightcurves/fullrun_mos1_xmm0605130101_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create