[Thu Nov 24 18:12:58 2011] Detection parameters:
  Position = (280.9, 306.2) = 8 11 24.86 76 1 18.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 189.3 +/- 42.3
  Background counts = 930.0
  Rate = 0.008 +/- 0.002

[Thu Nov 24 18:12:58 2011] Off-axis axis estimate = 1.39'
[Thu Nov 24 18:21:51 2011] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 18:21:51 2011] Initial guess for spatial extent in simple fitting = 7.12"
[Thu Nov 24 18:21:51 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.875
[Thu Nov 24 18:21:51 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 7.12"
[Thu Nov 24 19:11:05 2011] fullrun_pn_xmm0605110201_pi300-10000_cl_pass0_src5.ximg exists
[Thu Nov 24 19:11:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605110201_pi300-10000_cl_pass0_src5.csv
[Thu Nov 24 19:11:05 2011] fullrun_pn_xmm0605110201_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Nov 24 19:11:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605110201_pi300-10000_cl_pass0_src5.csv
[Thu Nov 24 19:11:05 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0605110201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0605110201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 19:11:05 2011] fullrun_pn_xmm0605110201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Nov 24 19:11:05 2011] fullrun_pn_xmm0605110201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Nov 24 19:11:05 2011] Fit fullrun_pn_xmm0605110201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Nov 24 19:31:21 2011] Warning, spatial fit 5 centroid is now closest to src. 2
[Thu Nov 24 19:31:21 2011] Spatial fit model total counts = 12867.700000, observed total counts = 12865.000000
[Thu Nov 24 19:31:21 2011] Offset between fit and detection position for source 5 = 5.633742 pixels
[Thu Nov 24 19:31:21 2011] Warning, changing simple spatial fit ID from 5 to 6
[Thu Nov 24 19:31:21 2011] 13004.947000 total counts/ 12251.000000 bgd. counts: snr = 6.811693
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 5.633742 pixels
  Position = (285.3, 302.8) = 8 11 19.53 76 1 4.6
  Extent = 13.8 (13.8-27.7)", rotation angle = 0
  Source counts = 753.9 +/- 114.0
  Background counts = 12251.0
  Rate = 0.02 +/- 0.003
[Thu Nov 24 19:31:21 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 19:31:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 19:31:21 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 19:31:21 2011] Source does appear to be extended
[Thu Nov 24 19:31:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 19:31:21 2011] Source is confused with source 6
[Thu Nov 24 19:31:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Nov 24 19:31:27 2011] Initial guess for spatial extent in simple fitting = 13.83"
[Thu Nov 24 19:31:27 2011] source mask rpix=3.2, npix_max = 54, mask sum = 48, frac = 0.887
[Thu Nov 24 19:31:27 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 13.83"
[Thu Nov 24 20:21:41 2011] fullrun_pn_xmm0605110201_pi300-10000_cl_pass1_src5.ximg exists
[Thu Nov 24 20:21:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605110201_pi300-10000_cl_pass1_src5.csv
[Thu Nov 24 20:21:41 2011] fullrun_pn_xmm0605110201_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Nov 24 20:21:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605110201_pi300-10000_cl_pass1_src5.csv
[Thu Nov 24 20:21:41 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0605110201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0605110201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 20:21:41 2011] fullrun_pn_xmm0605110201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Nov 24 20:21:41 2011] fullrun_pn_xmm0605110201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Nov 24 20:21:41 2011] Fit fullrun_pn_xmm0605110201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Nov 24 20:33:03 2011] Warning, spatial fit 5 centroid is now closest to src. 6
[Thu Nov 24 20:33:03 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 20:33:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 20:33:03 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 20:33:03 2011] Source does appear to be extended
[Thu Nov 24 20:33:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 20:33:08 2011] XMMSAS src. selection expression = ellipse(24776.552000, 26291.494000, 829.602024, 829.602024, 0.000000, X, Y)
[Thu Nov 24 20:33:08 2011] Writing source region out to fullrun_pn_xmm0605110201_pi300-10000_pass1_cl_src5_src.reg
[Thu Nov 24 20:33:08 2011] Extracting stamp from image fullrun_pn_xmm0605110201_pi300-10000_cl_sm2.00.img.gz, (238, 255) - (333, 350)
[Thu Nov 24 20:33:08 2011] XMMSAS bgd. selection expression = annulus(24776.552000, 26291.494000, 1382.670040, 2765.340080, X, Y) && !ellipse(26240.233100, 28224.710200, 1527.118258, 1527.118258, 0.000000, X, Y) && !ellipse(23971.446000, 27034.184000, 1139.832033, 1139.832033, 0.000000, X, Y) && !ellipse(24356.108800, 27397.145600, 1175.104034, 1175.104034, 0.000000, X, Y) && !ellipse(28243.222000, 29168.229200, 1284.680037, 615.035218, 50.897000, X, Y) && !ellipse(25105.990967, 26751.126770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27955.666000, 26373.158000, 737.200821, 737.200821, 0.000000, X, Y) && !ellipse(28467.812000, 25772.206000, 1527.072044, 1527.072044, 0.000000, X, Y) && !ellipse(27457.695860, 30084.372000, 1110.416032, 1110.416032, 0.000000, X, Y)
[Thu Nov 24 20:33:08 2011] Writing fullrun_pn_xmm0605110201_pi300-10000_pass1_cl_src5.gif
[Thu Nov 24 20:58:21 2011] Mean detx,y = (-1520.47, 431.40) 
[Thu Nov 24 20:58:32 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 20:58:50 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 20:58:51 2011] Setting source spectrum file to fullrun_pn_xmm0605110201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Nov 24 20:58:51 2011] Setting bgd. spectrum file to fullrun_pn_xmm0605110201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Nov 25 04:20:43 2011] Updating aperture counts using extracted products
[Fri Nov 25 04:20:43 2011] Error reading totcts from fullrun_pn_xmm0605110201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Nov 25 04:20:43 2011] Calculating source flux in energy range 0.30-8.00
[Fri Nov 25 04:20:43 2011] Using photon index=1.80, rate=0.0208, arf fullrun_pn_xmm0605110201_pi300-10000_pass1_cl_src5.arf
[Fri Nov 25 04:20:43 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Nov 25 04:20:44 2011] Updating source flux to 5.9e-14
[Fri Nov 25 04:22:20 2011] Flag c found in src. 5 procflags, skipping spectral fitting