[Thu Nov 24 18:13:33 2011] Detection parameters:
  Position = (395.2, 376.8) = 8 9 6.96 76 6 25.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149.9 +/- 21.9
  Background counts = 132.5
  Rate = 0.007 +/- 0.001

[Thu Nov 24 18:13:33 2011] Off-axis axis estimate = 9.03'
[Thu Nov 24 19:18:19 2011] Using EEF radius (= 10.94 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 19:18:19 2011] Initial guess for spatial extent in simple fitting = 10.94"
[Thu Nov 24 19:18:19 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.990
[Thu Nov 24 19:18:19 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 10.94"
[Thu Nov 24 19:31:18 2011] fullrun_mos2_xmm0605110201_pi300-10000_cl_pass0_src6.ximg exists
[Thu Nov 24 19:31:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605110201_pi300-10000_cl_pass0_src6.csv
[Thu Nov 24 19:31:18 2011] fullrun_mos2_xmm0605110201_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Nov 24 19:31:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605110201_pi300-10000_cl_pass0_src6.csv
[Thu Nov 24 19:31:18 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0605110201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0605110201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 19:31:18 2011] fullrun_mos2_xmm0605110201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Nov 24 19:31:18 2011] fullrun_mos2_xmm0605110201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Nov 24 19:31:18 2011] Fit fullrun_mos2_xmm0605110201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Thu Nov 24 19:31:23 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 12.742838 pixels away
[Thu Nov 24 19:31:23 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 19:31:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 19:31:23 2011] Assessing source extent using major
[Thu Nov 24 19:31:23 2011] Source does appear to be extended
[Thu Nov 24 19:31:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 20:28:19 2011] Using EEF radius (= 10.94 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 20:28:19 2011] Initial guess for spatial extent in simple fitting = 10.94"
[Thu Nov 24 20:28:19 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.990
[Thu Nov 24 20:28:19 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 10.94"
[Thu Nov 24 20:33:01 2011] fullrun_mos2_xmm0605110201_pi300-10000_cl_pass1_src4.ximg exists
[Thu Nov 24 20:33:01 2011] fullrun_mos2_xmm0605110201_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Nov 24 20:33:01 2011] Fit fullrun_mos2_xmm0605110201_pi300-10000_cl_pass1_src4 appears to have run properly
[Thu Nov 24 20:33:01 2011] fullrun_mos2_xmm0605110201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Nov 24 20:33:01 2011] fullrun_mos2_xmm0605110201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Nov 24 20:33:01 2011] Fit fullrun_mos2_xmm0605110201_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Nov 24 20:33:04 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 10.334894 pixels away
[Thu Nov 24 20:33:04 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 20:33:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 20:33:04 2011] Assessing source extent using major
[Thu Nov 24 20:33:04 2011] Source does appear to be extended
[Thu Nov 24 20:33:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 23:18:43 2011] XMMSAS src. selection expression = ellipse(34333.070038, 32736.845184, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Nov 24 23:18:43 2011] Writing source region out to fullrun_mos2_xmm0605110201_pi300-10000_pass1_cl_src6_src.reg
[Thu Nov 24 23:18:43 2011] Extracting stamp from image fullrun_mos2_xmm0605110201_pi300-10000_cl_sm2.00.img.gz, (358, 339) - (433, 414)
[Thu Nov 24 23:18:43 2011] XMMSAS bgd. selection expression = annulus(34333.070038, 32736.845184, 1087.500000, 2175.000000, X, Y) && !ellipse(34021.854400, 34941.236600, 332.896010, 332.896010, 0.000000, X, Y)
[Thu Nov 24 23:18:43 2011] Writing fullrun_mos2_xmm0605110201_pi300-10000_pass1_cl_src6.gif
[Thu Nov 24 23:38:39 2011] Mean detx,y = (-9589.58, -1823.03) 
[Thu Nov 24 23:38:40 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 23:38:49 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 23:38:49 2011] Setting source spectrum file to fullrun_mos2_xmm0605110201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Nov 24 23:38:49 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0605110201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Nov 25 04:19:54 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Nov 25 04:19:54 2011] rmf not generated due to insufficient counts
[Fri Nov 25 04:20:44 2011] Updating aperture counts using extracted products
[Fri Nov 25 04:20:44 2011] Error reading totcts from fullrun_mos2_xmm0605110201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Nov 25 04:20:45 2011] Calculating source flux in energy range 0.30-8.00
[Fri Nov 25 04:20:45 2011] Using photon index=1.80, rate=0.00653, arf fullrun_mos2_xmm0605110201_pi300-10000_pass1_cl_src6.arf
[Fri Nov 25 04:20:45 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Nov 25 04:20:45 2011] Updating source flux to 1e-13
[Fri Nov 25 04:21:35 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting