[Thu Nov 24 18:13:13 2011] Detection parameters:
  Position = (217.2, 374.0) = 8 12 41.86 76 6 9.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1148.0 +/- 48.6
  Background counts = 147.5
  Rate = 0.06 +/- 0.003

[Thu Nov 24 18:13:13 2011] Off-axis axis estimate = 8.04'
[Thu Nov 24 19:11:05 2011] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 19:11:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Nov 24 19:11:05 2011] Initial guess for spatial extent in simple fitting = 10.45"
[Thu Nov 24 19:11:05 2011] source mask rpix=2.4, npix_max = 33, mask sum = 26, frac = 0.772
[Thu Nov 24 19:11:05 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 10.45"
[Thu Nov 24 19:18:18 2011] fullrun_mos1_xmm0605110201_pi300-10000_cl_pass0_src2.ximg exists
[Thu Nov 24 19:18:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605110201_pi300-10000_cl_pass0_src2.csv
[Thu Nov 24 19:18:18 2011] fullrun_mos1_xmm0605110201_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Nov 24 19:18:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605110201_pi300-10000_cl_pass0_src2.csv
[Thu Nov 24 19:18:18 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605110201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605110201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 19:18:18 2011] fullrun_mos1_xmm0605110201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Nov 24 19:18:18 2011] fullrun_mos1_xmm0605110201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Nov 24 19:18:18 2011] Fit fullrun_mos1_xmm0605110201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Nov 24 19:31:22 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.188440 pixels away
[Thu Nov 24 19:31:22 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 19:31:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 19:31:22 2011] Assessing source extent using major
[Thu Nov 24 19:31:22 2011] Source does appear to be extended
[Thu Nov 24 19:31:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 19:31:22 2011] Source is confused with source 3
[Thu Nov 24 20:21:41 2011] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 20:21:41 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Nov 24 20:21:41 2011] Initial guess for spatial extent in simple fitting = 10.45"
[Thu Nov 24 20:21:41 2011] source mask rpix=2.4, npix_max = 33, mask sum = 26, frac = 0.772
[Thu Nov 24 20:21:41 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 10.45"
[Thu Nov 24 20:28:19 2011] fullrun_mos1_xmm0605110201_pi300-10000_cl_pass1_src2.ximg exists
[Thu Nov 24 20:28:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605110201_pi300-10000_cl_pass1_src2.csv
[Thu Nov 24 20:28:19 2011] fullrun_mos1_xmm0605110201_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Nov 24 20:28:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605110201_pi300-10000_cl_pass1_src2.csv
[Thu Nov 24 20:28:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605110201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605110201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 20:28:19 2011] fullrun_mos1_xmm0605110201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Nov 24 20:28:19 2011] fullrun_mos1_xmm0605110201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Nov 24 20:28:19 2011] Fit fullrun_mos1_xmm0605110201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Nov 24 20:33:03 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.714684 pixels away
[Thu Nov 24 20:33:03 2011] Spatial fit model total counts = 576.432000, observed total counts = 576.000000
[Thu Nov 24 20:33:03 2011] Offset between fit and detection position for source 2 = 0.963209 pixels
[Thu Nov 24 20:33:03 2011] Warning, changing simple spatial fit ID from 2 to 3
[Thu Nov 24 20:33:03 2011] 585.770000 total counts/ 220.589000 bgd. counts: snr = 24.587606
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.963209 pixels
  Position = (217.5, 373.0) = 8 12 41.60 76 6 9.0
  Extent = 8.3 (7.5-9.4)" x 5.5 (4.8-6.2)", rotation angle = 305 (293-315) degrees
  Source counts = 365.2 +/- 24.2
  Background counts = 220.6
  Rate = 0.02 +/- 0.001
[Thu Nov 24 20:33:03 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 20:33:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 20:33:03 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 20:33:03 2011] Source does appear to be extended
[Thu Nov 24 20:33:03 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.20
[Thu Nov 24 22:46:54 2011] XMMSAS src. selection expression = ellipse(18870.181800, 32404.168000, 498.124214, 328.262409, 304.762500, X, Y)
[Thu Nov 24 22:46:54 2011] Writing source region out to fullrun_mos1_xmm0605110201_pi300-10000_pass1_cl_src2_src.reg
[Thu Nov 24 22:46:54 2011] Extracting stamp from image fullrun_mos1_xmm0605110201_pi300-10000_cl_sm2.00.img.gz, (189, 344) - (246, 402)
[Thu Nov 24 22:46:54 2011] XMMSAS bgd. selection expression = annulus(18870.181800, 32404.168000, 830.207024, 1660.414048, X, Y) && !ellipse(18755.540558, 32097.346863, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Nov 24 22:46:54 2011] Writing fullrun_mos1_xmm0605110201_pi300-10000_pass1_cl_src2.gif
[Thu Nov 24 22:50:11 2011] Mean detx,y = (8097.54, -2516.32) 
[Thu Nov 24 22:50:13 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 22:50:30 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 22:50:31 2011] Setting source spectrum file to fullrun_mos1_xmm0605110201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Nov 24 22:50:31 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0605110201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Nov 25 04:20:44 2011] Updating aperture counts using extracted products
[Fri Nov 25 04:20:44 2011] Error reading totcts from fullrun_mos1_xmm0605110201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Nov 25 04:20:44 2011] Calculating source flux in energy range 0.30-8.00
[Fri Nov 25 04:20:44 2011] Using photon index=1.80, rate=0.0225, arf fullrun_mos1_xmm0605110201_pi300-10000_pass1_cl_src2.arf
[Fri Nov 25 04:20:44 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Nov 25 04:20:44 2011] Updating source flux to 4.5e-13
[Fri Nov 25 04:20:46 2011] Flag c found in src. 2 procflags, skipping spectral fitting