[Thu Nov 24 18:13:13 2011] Detection parameters:
  Position = (302.4, 325.0) = 8 10 59.07 76 2 41.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84751.5 +/- 346.4
  Background counts = 232.8
  Rate = 2 +/- 0.01

[Thu Nov 24 18:13:13 2011] Off-axis axis estimate = 1.95'
[Thu Nov 24 19:11:05 2011] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 19:11:05 2011] Initial guess for spatial extent in simple fitting = 7.40"
[Thu Nov 24 19:11:05 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.032
[Thu Nov 24 19:11:05 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.40"
[Thu Nov 24 19:18:18 2011] fullrun_mos1_xmm0605110201_pi300-10000_cl_pass0_src1.ximg exists
[Thu Nov 24 19:18:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605110201_pi300-10000_cl_pass0_src1.csv
[Thu Nov 24 19:18:18 2011] fullrun_mos1_xmm0605110201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Nov 24 19:18:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605110201_pi300-10000_cl_pass0_src1.csv
[Thu Nov 24 19:18:18 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605110201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605110201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 19:18:18 2011] fullrun_mos1_xmm0605110201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Nov 24 19:18:18 2011] fullrun_mos1_xmm0605110201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Nov 24 19:18:18 2011] Fit fullrun_mos1_xmm0605110201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Nov 24 19:31:22 2011] Spatial fit model total counts = 31646.400000, observed total counts = 31648.000000
[Thu Nov 24 19:31:22 2011] Offset between fit and detection position for source 1 = 0.206912 pixels
[Thu Nov 24 19:31:22 2011] 31575.620000 total counts/ 6135.720000 bgd. counts: snr = 324.775031
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.206912 pixels
  Position = (302.2, 324.9) = 8 10 59.32 76 2 41.1
  Extent = 5.4 (5.4-5.5)", rotation angle = 0
  Source counts = 25439.9 +/- 177.7
  Background counts = 6135.7
  Rate = 2 +/- 0.01
[Thu Nov 24 19:31:22 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 19:31:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 19:31:22 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 19:31:22 2011] Source does appear to be extended
[Thu Nov 24 19:31:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 20:21:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Nov 24 20:21:41 2011] Initial guess for spatial extent in simple fitting = 5.41"
[Thu Nov 24 20:21:41 2011] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.315
[Thu Nov 24 20:21:41 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.41"
[Thu Nov 24 20:28:19 2011] fullrun_mos1_xmm0605110201_pi300-10000_cl_pass1_src1.ximg exists
[Thu Nov 24 20:28:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605110201_pi300-10000_cl_pass1_src1.csv
[Thu Nov 24 20:28:19 2011] fullrun_mos1_xmm0605110201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Nov 24 20:28:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605110201_pi300-10000_cl_pass1_src1.csv
[Thu Nov 24 20:28:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605110201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605110201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 20:28:19 2011] fullrun_mos1_xmm0605110201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Nov 24 20:28:19 2011] fullrun_mos1_xmm0605110201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Nov 24 20:28:19 2011] Fit fullrun_mos1_xmm0605110201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Nov 24 20:33:03 2011] Spatial fit model total counts = 31730.000000, observed total counts = 31730.000000
[Thu Nov 24 20:33:03 2011] Offset between fit and detection position for source 1 = 0.013313 pixels
[Thu Nov 24 20:33:03 2011] 31788.840000 total counts/ 6320.840000 bgd. counts: snr = 320.337250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.013313 pixels
  Position = (302.2, 324.9) = 8 10 59.32 76 2 41.0
  Extent = 5.4 (5.4-5.5)", rotation angle = 0
  Source counts = 25468.0 +/- 178.3
  Background counts = 6320.8
  Rate = 2 +/- 0.01
[Thu Nov 24 20:33:03 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 20:33:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 20:33:03 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 20:33:03 2011] Source does appear to be extended
[Thu Nov 24 20:33:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 22:46:54 2011] Counts = 25468.000000, rescaling region sizes by 3.000000
[Thu Nov 24 22:46:54 2011] XMMSAS src. selection expression = ellipse(26240.884760, 28220.538260, 975.522628, 975.522628, 0.000000, X, Y)
[Thu Nov 24 22:46:54 2011] Writing source region out to fullrun_mos1_xmm0605110201_pi300-10000_pass1_cl_src1_src.reg
[Thu Nov 24 22:46:54 2011] Extracting stamp from image fullrun_mos1_xmm0605110201_pi300-10000_cl_sm2.00.img.gz, (246, 269) - (358, 381)
[Thu Nov 24 22:46:54 2011] XMMSAS bgd. selection expression = annulus(26240.884760, 28220.538260, 4877.613140, 9755.226281, X, Y) && !ellipse(18870.181800, 32404.168000, 664.165619, 437.683213, 304.762500, X, Y) && !ellipse(18755.540558, 32097.346863, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Nov 24 22:46:54 2011] Writing fullrun_mos1_xmm0605110201_pi300-10000_pass1_cl_src1.gif
[Thu Nov 24 22:47:02 2011] Mean detx,y = (133.82, 374.80) 
[Thu Nov 24 22:47:04 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 22:50:06 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 22:50:06 2011] Setting source spectrum file to fullrun_mos1_xmm0605110201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Nov 24 22:50:06 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0605110201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Nov 25 04:20:44 2011] Updating aperture counts using extracted products
[Fri Nov 25 04:20:44 2011] Error reading totcts from fullrun_mos1_xmm0605110201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Nov 25 04:20:44 2011] Calculating source flux in energy range 0.30-8.00
[Fri Nov 25 04:20:44 2011] Using photon index=1.80, rate=1.57, arf fullrun_mos1_xmm0605110201_pi300-10000_pass1_cl_src1.arf
[Fri Nov 25 04:20:44 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Nov 25 04:20:44 2011] Updating source flux to 1.5e-11
[Fri Nov 25 04:21:35 2011] Reading fit data from xmm0605110201/analysis//spectral/fullrun_mos1_xmm0605110201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Nov 25 04:21:35 2011] Spectral fit parameter nH value = 5.99047e+14
[Fri Nov 25 04:21:35 2011] Spectral fit parameter PhoIndex value = 2.42008
[Fri Nov 25 04:21:35 2011] Failed to get F(0.3-8.0) from xmm0605110201/analysis//spectral/fullrun_mos1_xmm0605110201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Nov 25 04:21:35 2011] Calculating source flux in energy range 0.30-8.00
[Fri Nov 25 04:21:35 2011] Using Nh = 6e+14, photon index=2.42, rate=1.57, arf fullrun_mos1_xmm0605110201_pi300-10000_pass1_cl_src1.arf
[Fri Nov 25 04:21:35 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Nov 25 04:21:35 2011] Updating source flux to 1.2e-11