[Fri Dec 23 23:05:36 2011] Detection parameters: Position = (317.2, 300.1) = 8 10 35.59 76 1 11.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 327.2 +/- 50.7 Background counts = 1142.9 Rate = 0.01 +/- 0.002 [Fri Dec 23 23:05:36 2011] Off-axis axis estimate = 1.37' [Fri Dec 23 23:21:31 2011] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting [Fri Dec 23 23:21:31 2011] Initial guess for spatial extent in simple fitting = 7.11" [Fri Dec 23 23:21:31 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.877 [Fri Dec 23 23:21:31 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.11" [Fri Dec 23 23:52:37 2011] fullrun_pn_xmm0605110101_pi300-10000_cl_pass0_src1.ximg exists [Fri Dec 23 23:52:37 2011] fullrun_pn_xmm0605110101_pi300-10000_cl_pass0_src1_1.ximg exists [Fri Dec 23 23:52:37 2011] Fit fullrun_pn_xmm0605110101_pi300-10000_cl_pass0_src1 appears to have run properly [Fri Dec 23 23:52:37 2011] fullrun_pn_xmm0605110101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Fri Dec 23 23:52:37 2011] fullrun_pn_xmm0605110101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Fri Dec 23 23:52:37 2011] Fit fullrun_pn_xmm0605110101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Sat Dec 24 00:28:23 2011] Source 1 is offset by 6.338412 and -7.549199 pixels which is larger than 2 X fitted extent = 6.659954 x 4.176635, not incorporating fit results [Sat Dec 24 00:28:23 2011] Spatial fit model total counts = 4969.600000, observed total counts = 4966.000000 [Sat Dec 24 00:28:23 2011] Offset between fit and detection position for source 1 = 2.886272 pixels [Sat Dec 24 00:28:23 2011] Warning, changing simple spatial fit ID from 1 to 3 [Sat Dec 24 00:28:23 2011] 4987.619000 total counts/ 4442.800000 bgd. counts: snr = 8.173797 Spatial fit parameters: Offset between fit and detection position for source 1 = 2.886272 pixels Position = (318.7, 297.6) = 8 10 33.89 76 1 1.5 Extent = 14.7 (14.7-29.4)", rotation angle = 0 Source counts = 544.8 +/- 70.6 Background counts = 4442.8 Rate = 0.02 +/- 0.003 [Sat Dec 24 00:28:23 2011] Vigneting correction estimate = 1.000000 [Sat Dec 24 00:28:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Dec 24 00:28:23 2011] Assessing source extent using major axis lower bound [Sat Dec 24 00:28:23 2011] Source does appear to be extended [Sat Dec 24 00:28:23 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Dec 24 00:28:23 2011] Source is confused with source 3 [Sat Dec 24 00:28:36 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Dec 24 00:28:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Dec 24 00:28:36 2011] Initial guess for spatial extent in simple fitting = 14.72" [Sat Dec 24 00:28:36 2011] source mask rpix=3.4, npix_max = 60, mask sum = 56, frac = 0.928 [Sat Dec 24 00:28:36 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 14.72" [Sat Dec 24 00:56:01 2011] fullrun_pn_xmm0605110101_pi300-10000_cl_pass1_src1.ximg exists [Sat Dec 24 00:56:01 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0605110101_pi300-10000_cl_pass1_src1.csv [Sat Dec 24 00:56:01 2011] fullrun_pn_xmm0605110101_pi300-10000_cl_pass1_src1_1.ximg exists [Sat Dec 24 00:56:01 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0605110101_pi300-10000_cl_pass1_src1.csv [Sat Dec 24 00:56:01 2011] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0605110101_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0605110101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Dec 24 00:56:01 2011] fullrun_pn_xmm0605110101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Sat Dec 24 00:56:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605110101_pi300-10000_cl_pass1_tfrozen_src1.csv [Sat Dec 24 00:56:01 2011] fullrun_pn_xmm0605110101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Sat Dec 24 00:56:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0605110101_pi300-10000_cl_pass1_tfrozen_src1.csv [Sat Dec 24 00:56:01 2011] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0605110101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0605110101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Dec 24 01:42:01 2011] Warning, spatial fit 1 centroid is now closest to src. 3 [Sat Dec 24 01:42:01 2011] Vigneting correction estimate = 1.000000 [Sat Dec 24 01:42:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Dec 24 01:42:01 2011] Assessing source extent using major axis lower bound [Sat Dec 24 01:42:01 2011] Source does appear to be extended [Sat Dec 24 01:42:01 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Dec 24 01:42:13 2011] XMMSAS src. selection expression = ellipse(27675.550000, 25841.332000, 883.314025, 883.314025, 0.000000, X, Y) [Sat Dec 24 01:42:13 2011] Writing source region out to fullrun_pn_xmm0605110101_pi300-10000_pass1_cl_src1_src.reg [Sat Dec 24 01:42:13 2011] Extracting stamp from image fullrun_pn_xmm0605110101_pi300-10000_cl_sm2.00.img.gz, (268, 247) - (369, 348) [Sat Dec 24 01:42:13 2011] XMMSAS bgd. selection expression = annulus(27675.550000, 25841.332000, 1472.190042, 2944.380085, X, Y) && !ellipse(25850.276200, 27861.542000, 1817.830515, 1817.830515, 0.000000, X, Y) && !ellipse(28387.582000, 24929.616000, 1159.376033, 1159.376033, 0.000000, X, Y) && !ellipse(27435.081400, 29970.866000, 1285.064037, 1285.064037, 0.000000, X, Y) [Sat Dec 24 01:42:13 2011] Writing fullrun_pn_xmm0605110101_pi300-10000_pass1_cl_src1.gif [Sat Dec 24 01:48:01 2011] Mean detx,y = (221.68, 2632.34) [Sat Dec 24 01:48:19 2011] Setting backscal keywords in source and bgd. spectrum [Sat Dec 24 01:49:13 2011] Binned source spectrum to 10 counts/bin [Sat Dec 24 01:49:14 2011] Setting source spectrum file to fullrun_pn_xmm0605110101_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Sat Dec 24 01:49:14 2011] Setting bgd. spectrum file to fullrun_pn_xmm0605110101_pi300-10000_pass1_cl_src1_bgd.pi.gz [Sat Dec 24 07:07:06 2011] Updating aperture counts using extracted products [Sat Dec 24 07:07:06 2011] Error reading totcts from fullrun_pn_xmm0605110101_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Sat Dec 24 07:07:06 2011] Calculating source flux in energy range 0.30-8.00 [Sat Dec 24 07:07:06 2011] Using photon index=1.80, rate=0.0195, arf fullrun_pn_xmm0605110101_pi300-10000_pass1_cl_src1.arf [Sat Dec 24 07:07:06 2011] Assuming count rate is from the 0.30-10.00 bandpass [Sat Dec 24 07:07:06 2011] Updating source flux to 4.6e-14 [Sat Dec 24 07:08:39 2011] Flag b found in src. 1 procflags, skipping spectral fitting [Sat Dec 24 07:08:39 2011] Flag c found in src. 1 procflags, skipping spectral fitting [Sat Dec 24 07:10:12 2011] Reading fit data from xmm0605110101/analysis//spectral/fullrun_pn_xmm0605110101_pi300-10000_pass1_cl_src1_pl.csv [Sat Dec 24 07:10:12 2011] Spectral fit parameter nH value = 6.5192e+20 [Sat Dec 24 07:10:12 2011] Spectral fit parameter PhoIndex value = 3.0835 [Sat Dec 24 07:10:12 2011] Failed to get F(0.3-8.0) from xmm0605110101/analysis//spectral/fullrun_pn_xmm0605110101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Sat Dec 24 07:10:12 2011] Calculating source flux in energy range 0.30-8.00 [Sat Dec 24 07:10:12 2011] Using Nh = 6.5e+20, photon index=3.08, rate=0.0195, arf fullrun_pn_xmm0605110101_pi300-10000_pass1_cl_src1.arf [Sat Dec 24 07:10:12 2011] Assuming count rate is from the 0.30-10.00 bandpass [Sat Dec 24 07:10:12 2011] Updating source flux to 2.9e-14