[Sun Aug 12 23:11:27 2012] Detection parameters:
  Position = (211.4, 224.7) = 5 6 6.65 -23 55 48.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.3 +/- 14.0
  Background counts = 18.0
  Rate = 0.006 +/- 0.0008

[Sun Aug 12 23:11:27 2012] Off-axis axis estimate = 8.27'
[Mon Aug 13 00:28:23 2012] Using EEF radius (= 10.56 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 00:28:23 2012] Initial guess for spatial extent in simple fitting = 10.56"
[Mon Aug 13 00:28:23 2012] source mask rpix=2.4, npix_max = 34, mask sum = 28, frac = 0.816
[Mon Aug 13 00:28:23 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.56"
[Mon Aug 13 01:10:56 2012] fullrun_mos2_xmm0605090101_pi300-10000_cl_pass0_src11.ximg exists
[Mon Aug 13 01:10:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605090101_pi300-10000_cl_pass0_src11.csv
[Mon Aug 13 01:10:56 2012] fullrun_mos2_xmm0605090101_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon Aug 13 01:10:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605090101_pi300-10000_cl_pass0_src11.csv
[Mon Aug 13 01:10:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0605090101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0605090101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 01:10:56 2012] fullrun_mos2_xmm0605090101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon Aug 13 01:10:56 2012] fullrun_mos2_xmm0605090101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Aug 13 01:10:56 2012] Fit fullrun_mos2_xmm0605090101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Mon Aug 13 01:11:16 2012] Spatial fit model total counts = 260.785000, observed total counts = 259.000000
[Mon Aug 13 01:11:16 2012] Offset between fit and detection position for source 14 = 0.217082 pixels
[Mon Aug 13 01:11:16 2012] 263.511500 total counts/ 190.010000 bgd. counts: snr = 5.332219
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.217082 pixels
  Position = (211.5, 224.5) = 5 6 6.65 -23 55 49.4
  Extent = 4.7 (3.9-6.0)", rotation angle = 0
  Source counts = 73.5 +/- 16.2
  Background counts = 190.0
  Rate = 0.002 +/- 0.0005
[Mon Aug 13 01:11:16 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 01:11:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 01:11:16 2012] Assessing source extent using major axis lower bound
[Mon Aug 13 01:11:16 2012] Source does appear to be extended
[Mon Aug 13 01:11:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 02:23:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 13 02:23:39 2012] Initial guess for spatial extent in simple fitting = 4.74"
[Mon Aug 13 02:23:39 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.891
[Mon Aug 13 02:23:39 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 4.74"
[Mon Aug 13 03:02:55 2012] fullrun_mos2_xmm0605090101_pi300-10000_cl_pass1_src11.ximg exists
[Mon Aug 13 03:02:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605090101_pi300-10000_cl_pass1_src11.csv
[Mon Aug 13 03:02:55 2012] fullrun_mos2_xmm0605090101_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon Aug 13 03:02:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0605090101_pi300-10000_cl_pass1_src11.csv
[Mon Aug 13 03:02:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0605090101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0605090101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 03:02:55 2012] fullrun_mos2_xmm0605090101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon Aug 13 03:02:55 2012] fullrun_mos2_xmm0605090101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Aug 13 03:02:55 2012] Fit fullrun_mos2_xmm0605090101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Mon Aug 13 03:03:10 2012] Warning, spatial fit 11 centroid is now closest to src. 30
[Mon Aug 13 03:03:10 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 03:03:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 03:03:10 2012] Assessing source extent using major axis lower bound
[Mon Aug 13 03:03:10 2012] Source does appear to be extended
[Mon Aug 13 03:03:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 04:39:42 2012] XMMSAS src. selection expression = ellipse(18348.003800, 19479.882200, 284.340478, 284.340478, 0.000000, X, Y)
[Mon Aug 13 04:39:42 2012] Writing source region out to fullrun_mos2_xmm0605090101_pi300-10000_pass1_cl_src14_src.reg
[Mon Aug 13 04:39:42 2012] Extracting stamp from image fullrun_mos2_xmm0605090101_pi300-10000_cl_sm2.00.img.gz, (195, 208) - (228, 241)
[Mon Aug 13 04:39:42 2012] XMMSAS bgd. selection expression = annulus(18348.003800, 19479.882200, 473.900797, 947.801595, X, Y)
[Mon Aug 13 04:39:42 2012] Writing fullrun_mos2_xmm0605090101_pi300-10000_pass1_cl_src14.gif
[Mon Aug 13 04:42:19 2012] Mean detx,y = (-2367.85, 7654.02) 
[Mon Aug 13 04:42:19 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 13 04:42:27 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 13 04:42:27 2012] Setting source spectrum file to fullrun_mos2_xmm0605090101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon Aug 13 04:42:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0605090101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Mon Aug 13 05:03:36 2012] Not generating rmf since there are only 73 counts
[Mon Aug 13 05:03:36 2012] rmf not generated due to insufficient counts
[Mon Aug 13 05:06:18 2012] Updating aperture counts using extracted products
[Mon Aug 13 05:06:18 2012] Error reading totcts from fullrun_mos2_xmm0605090101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon Aug 13 05:06:19 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 13 05:06:19 2012] Using photon index=1.80, rate=0.00241, arf fullrun_mos2_xmm0605090101_pi300-10000_pass1_cl_src14.arf
[Mon Aug 13 05:06:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 13 05:06:19 2012] Updating source flux to 5.2e-14
[Mon Aug 13 05:06:51 2012] Source 14 has fewer than 100.000000 counts, skipping spectral fitting