[Sun Nov 27 03:13:07 2011] Detection parameters:
  Position = (285.4, 322.2) = 8 43 4.18 36 22 3.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 196.6 +/- 25.4
  Background counts = 185.2
  Rate = 0.01 +/- 0.001

[Sun Nov 27 03:13:07 2011] Off-axis axis estimate = 1.96'
[Sun Nov 27 04:20:44 2011] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 04:20:44 2011] Initial guess for spatial extent in simple fitting = 7.41"
[Sun Nov 27 04:20:44 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.030
[Sun Nov 27 04:20:44 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.41"
[Sun Nov 27 04:45:53 2011] fullrun_mos1_xmm0605000701_pi300-10000_cl_pass0_src3.ximg exists
[Sun Nov 27 04:45:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605000701_pi300-10000_cl_pass0_src3.csv
[Sun Nov 27 04:45:53 2011] fullrun_mos1_xmm0605000701_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Nov 27 04:45:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605000701_pi300-10000_cl_pass0_src3.csv
[Sun Nov 27 04:45:53 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605000701_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605000701_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 04:45:53 2011] fullrun_mos1_xmm0605000701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Nov 27 04:45:53 2011] fullrun_mos1_xmm0605000701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Nov 27 04:45:53 2011] Fit fullrun_mos1_xmm0605000701_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Nov 27 05:11:23 2011] Source 7 is offset by -6.441350 and 5.971349 pixels which is larger than
2 X fitted extent = 0.851752 x 0.851752, not incorporating fit results
[Sun Nov 27 05:11:23 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 05:11:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 05:11:23 2011] Assessing source extent using major
[Sun Nov 27 05:11:23 2011] Source does appear to be extended
[Sun Nov 27 05:11:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 05:44:08 2011] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 05:44:08 2011] Initial guess for spatial extent in simple fitting = 7.41"
[Sun Nov 27 05:44:08 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.030
[Sun Nov 27 05:44:08 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 7.41"
[Sun Nov 27 06:05:26 2011] fullrun_mos1_xmm0605000701_pi300-10000_cl_pass1_src3.ximg exists
[Sun Nov 27 06:05:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605000701_pi300-10000_cl_pass1_src3.csv
[Sun Nov 27 06:05:26 2011] fullrun_mos1_xmm0605000701_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Nov 27 06:05:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0605000701_pi300-10000_cl_pass1_src3.csv
[Sun Nov 27 06:05:26 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0605000701_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0605000701_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 06:05:26 2011] fullrun_mos1_xmm0605000701_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Nov 27 06:05:26 2011] fullrun_mos1_xmm0605000701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Nov 27 06:05:26 2011] Fit fullrun_mos1_xmm0605000701_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Nov 27 06:38:33 2011] Spatial fit model total counts = 284.001000, observed total counts = 284.000000
[Sun Nov 27 06:38:33 2011] Offset between fit and detection position for source 7 = 0.670130 pixels
[Sun Nov 27 06:38:33 2011] 291.605700 total counts/ 275.251000 bgd. counts: snr = 0.985776
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.670130 pixels
  Position = (285.0, 322.7) = 8 43 4.30 36 22 5.1
  Extent = 3.3 (1.9-6.4)", rotation angle = 0
  Source counts = 16.4 +/- 17.1
  Background counts = 275.3
  Rate = 0.004 +/- 0.004
  Deleting source due to low Poisson probability