[Sat May  5 10:34:39 2012] Detection parameters:
  Position = (399.7, 330.2) = 17 54 42.27 -33 11 18.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.1 +/- 13.4
  Background counts = 52.7
  Rate = 0.002 +/- 0.0005

[Sat May  5 10:34:41 2012] Off-axis axis estimate = 7.69'
[Sat May  5 13:55:43 2012] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Sat May  5 13:55:43 2012] Initial guess for spatial extent in simple fitting = 10.27"
[Sat May  5 13:55:43 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.099
[Sat May  5 13:55:43 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 10.27"
[Sat May  5 15:01:14 2012] fullrun_mos2_xmm0604980201_pi300-10000_cl_pass0_src14.ximg exists
[Sat May  5 15:01:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604980201_pi300-10000_cl_pass0_src14.csv
[Sat May  5 15:01:14 2012] fullrun_mos2_xmm0604980201_pi300-10000_cl_pass0_src14_1.ximg exists
[Sat May  5 15:01:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604980201_pi300-10000_cl_pass0_src14.csv
[Sat May  5 15:01:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604980201_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604980201_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 15:01:15 2012] fullrun_mos2_xmm0604980201_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sat May  5 15:01:15 2012] fullrun_mos2_xmm0604980201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sat May  5 15:01:15 2012] Fit fullrun_mos2_xmm0604980201_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Sat May  5 15:01:44 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 10.821942 pixels away
[Sat May  5 15:01:44 2012] Vigneting correction estimate = 1.000000
[Sat May  5 15:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 15:01:44 2012] Assessing source extent using major
[Sat May  5 15:01:44 2012] Source does appear to be extended
[Sat May  5 15:01:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 17:36:06 2012] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Sat May  5 17:36:06 2012] Initial guess for spatial extent in simple fitting = 10.27"
[Sat May  5 17:36:06 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.099
[Sat May  5 17:36:06 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 10.27"
[Sat May  5 18:25:39 2012] fullrun_mos2_xmm0604980201_pi300-10000_cl_pass1_src13.ximg exists
[Sat May  5 18:25:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604980201_pi300-10000_cl_pass1_src13.csv
[Sat May  5 18:25:39 2012] fullrun_mos2_xmm0604980201_pi300-10000_cl_pass1_src13_1.ximg exists
[Sat May  5 18:25:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604980201_pi300-10000_cl_pass1_src13.csv
[Sat May  5 18:25:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604980201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604980201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 18:25:39 2012] fullrun_mos2_xmm0604980201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sat May  5 18:25:39 2012] fullrun_mos2_xmm0604980201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sat May  5 18:25:39 2012] Fit fullrun_mos2_xmm0604980201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sat May  5 18:26:06 2012] Spatial fit model total counts = 394.888000, observed total counts = 394.000000
[Sat May  5 18:26:06 2012] Offset between fit and detection position for source 9 = 6.184459 pixels
[Sat May  5 18:26:06 2012] 398.346000 total counts/ 278.848000 bgd. counts: snr = 7.156108
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 6.184459 pixels
  Position = (393.7, 331.6) = 17 54 44.35 -33 11 12.3
  Extent = 20.5 (20.5-20.5)", rotation angle = 0
  Source counts = 119.5 +/- 20.0
  Background counts = 278.8
  Rate = 0.002 +/- 0.0004
[Sat May  5 18:26:06 2012] Vigneting correction estimate = 1.000000
[Sat May  5 18:26:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 18:26:06 2012] Assessing source extent using major axis lower bound
[Sat May  5 18:26:06 2012] Source does appear to be extended
[Sat May  5 18:26:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 20:24:33 2012] XMMSAS src. selection expression = ellipse(34199.888000, 28804.052600, 1232.398823, 1232.398823, 0.000000, X, Y)
[Sat May  5 20:24:33 2012] Writing source region out to fullrun_mos2_xmm0604980201_pi300-10000_pass1_cl_src9_src.reg
[Sat May  5 20:24:33 2012] Extracting stamp from image fullrun_mos2_xmm0604980201_pi300-10000_cl_sm2.00.img.gz, (323, 261) - (464, 402)
[Sat May  5 20:24:33 2012] XMMSAS bgd. selection expression = annulus(34199.888000, 28804.052600, 2053.998038, 4107.996077, X, Y) && !ellipse(33088.217560, 24964.341400, 752.300022, 752.300022, 0.000000, X, Y) && !ellipse(33566.432983, 32484.771393, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  5 20:24:33 2012] Writing fullrun_mos2_xmm0604980201_pi300-10000_pass1_cl_src9.gif
[Sat May  5 20:32:05 2012] Mean detx,y = (9377.26, -4910.37) 
[Sat May  5 20:32:08 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 20:33:59 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 20:33:59 2012] Setting source spectrum file to fullrun_mos2_xmm0604980201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat May  5 20:33:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604980201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat May  5 21:15:43 2012] Updating aperture counts using extracted products
[Sat May  5 21:15:43 2012] Error reading totcts from fullrun_mos2_xmm0604980201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat May  5 21:15:44 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 21:15:44 2012] Using photon index=1.80, rate=0.00241, arf fullrun_mos2_xmm0604980201_pi300-10000_pass1_cl_src9.arf
[Sat May  5 21:15:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 21:15:45 2012] Updating source flux to 4e-14