[Sat May  5 10:34:34 2012] Detection parameters:
  Position = (478.6, 260.9) = 17 54 14.87 -33 16 26.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.6 +/- 13.3
  Background counts = 38.8
  Rate = 0.001 +/- 0.0002

[Sat May  5 10:34:37 2012] Off-axis axis estimate = 13.34'
[Sat May  5 12:57:17 2012] Using EEF radius (= 13.10 ")to estimate initial spatial extent for simple fitting
[Sat May  5 12:57:17 2012] Initial guess for spatial extent in simple fitting = 13.10"
[Sat May  5 12:57:17 2012] source mask rpix=3.0, npix_max = 49, mask sum = 47, frac = 0.953
[Sat May  5 12:57:17 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 13.10"
[Sat May  5 13:55:43 2012] fullrun_mos1_xmm0604980201_pi300-10000_cl_pass0_src18.ximg exists
[Sat May  5 13:55:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604980201_pi300-10000_cl_pass0_src18.csv
[Sat May  5 13:55:43 2012] fullrun_mos1_xmm0604980201_pi300-10000_cl_pass0_src18_1.ximg exists
[Sat May  5 13:55:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604980201_pi300-10000_cl_pass0_src18.csv
[Sat May  5 13:55:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604980201_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604980201_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 13:55:43 2012] fullrun_mos1_xmm0604980201_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sat May  5 13:55:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604980201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sat May  5 13:55:43 2012] fullrun_mos1_xmm0604980201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sat May  5 13:55:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604980201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sat May  5 13:55:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604980201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604980201_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 15:01:28 2012] Warning, spatial fit 16 centroid is now closest to src. 14
[Sat May  5 15:01:35 2012] Warning, spatial fit 18 centroid is now closest to src. 14
[Sat May  5 15:01:35 2012] Vigneting correction estimate = 1.000000
[Sat May  5 15:01:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 15:01:35 2012] Assessing source extent using major
[Sat May  5 15:01:35 2012] Source does appear to be extended
[Sat May  5 15:01:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 16:49:08 2012] Using EEF radius (= 13.10 ")to estimate initial spatial extent for simple fitting
[Sat May  5 16:49:08 2012] Initial guess for spatial extent in simple fitting = 13.10"
[Sat May  5 16:49:08 2012] source mask rpix=3.0, npix_max = 49, mask sum = 47, frac = 0.953
[Sat May  5 16:49:08 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 13.10"
[Sat May  5 17:36:06 2012] fullrun_mos1_xmm0604980201_pi300-10000_cl_pass1_src18.ximg exists
[Sat May  5 17:36:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604980201_pi300-10000_cl_pass1_src18.csv
[Sat May  5 17:36:06 2012] fullrun_mos1_xmm0604980201_pi300-10000_cl_pass1_src18_1.ximg exists
[Sat May  5 17:36:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604980201_pi300-10000_cl_pass1_src18.csv
[Sat May  5 17:36:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604980201_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604980201_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 17:36:06 2012] fullrun_mos1_xmm0604980201_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sat May  5 17:36:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604980201_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sat May  5 17:36:06 2012] fullrun_mos1_xmm0604980201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sat May  5 17:36:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604980201_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sat May  5 17:36:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604980201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604980201_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 18:25:58 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 16.741294 pixels away
[Sat May  5 18:25:58 2012] Vigneting correction estimate = 1.000000
[Sat May  5 18:25:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 18:25:58 2012] Assessing source extent using major
[Sat May  5 18:25:58 2012] Source does appear to be extended
[Sat May  5 18:25:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 19:48:34 2012] XMMSAS src. selection expression = ellipse(41585.550720, 22647.232056, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May  5 19:48:34 2012] Writing source region out to fullrun_mos1_xmm0604980201_pi300-10000_pass1_cl_src5_src.reg
[Sat May  5 19:48:34 2012] Extracting stamp from image fullrun_mos1_xmm0604980201_pi300-10000_cl_sm2.00.img.gz, (441, 223) - (516, 298)
[Sat May  5 19:48:34 2012] XMMSAS bgd. selection expression = annulus(41585.550720, 22647.232056, 1087.500000, 2175.000000, X, Y) && !ellipse(40879.535950, 21918.595108, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  5 19:48:34 2012] Writing fullrun_mos1_xmm0604980201_pi300-10000_pass1_cl_src5.gif
[Sat May  5 19:59:21 2012] Mean detx,y = (1133.65, -16991.29) 
[Sat May  5 19:59:24 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 20:00:15 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 20:00:16 2012] Setting source spectrum file to fullrun_mos1_xmm0604980201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat May  5 20:00:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604980201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat May  5 20:24:06 2012] Not generating rmf since there are only 54 counts
[Sat May  5 20:24:06 2012] rmf not generated due to insufficient counts
[Sat May  5 21:15:41 2012] Updating aperture counts using extracted products
[Sat May  5 21:15:41 2012] Error reading totcts from fullrun_mos1_xmm0604980201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat May  5 21:15:42 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 21:15:42 2012] Using photon index=1.80, rate=0.000986, arf fullrun_mos1_xmm0604980201_pi300-10000_pass1_cl_src5.arf
[Sat May  5 21:15:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 21:15:42 2012] Updating source flux to 4.3e-14
[Sat May  5 21:15:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting