[Wed May 29 20:49:06 2013] Detection parameters:
  Position = (465.6, 401.4) = 18 29 45.95 -23 52 16.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 272.6 +/- 23.8
  Background counts = 123.9
  Rate = 0.005 +/- 0.0004

[Wed May 29 20:49:09 2013] Off-axis axis estimate = 14.23'
[Wed May 29 20:53:28 2013] Using EEF radius (= 13.54 ")to estimate initial spatial extent for simple fitting
[Wed May 29 20:53:28 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 29 20:53:28 2013] Initial guess for spatial extent in simple fitting = 13.54"
[Wed May 29 20:53:28 2013] source mask rpix=3.1, npix_max = 52, mask sum = 39, frac = 0.747
[Wed May 29 20:53:28 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 13.54"
[Thu May 30 00:39:00 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_src3.ximg exists
[Thu May 30 00:39:00 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_src3.csv
[Thu May 30 00:39:00 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu May 30 00:39:00 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_src3.csv
[Thu May 30 00:39:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 00:39:01 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu May 30 00:39:01 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu May 30 00:39:01 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu May 30 00:39:01 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu May 30 00:39:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 07:19:16 2013] Warning, spatial fit 3 centroid is now closest to src. 14
[Thu May 30 07:19:17 2013] Vigneting correction estimate = 1.000000
[Thu May 30 07:19:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 07:19:17 2013] Assessing source extent using major
[Thu May 30 07:19:17 2013] Source does appear to be extended
[Thu May 30 07:19:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 07:19:17 2013] Source is confused with source 7
[Thu May 30 07:19:17 2013] Source is confused with source 31
[Thu May 30 07:20:05 2013] Using EEF radius (= 13.54 ")to estimate initial spatial extent for simple fitting
[Thu May 30 07:20:05 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 30 07:20:05 2013] Initial guess for spatial extent in simple fitting = 13.54"
[Thu May 30 07:20:05 2013] source mask rpix=3.1, npix_max = 52, mask sum = 39, frac = 0.747
[Thu May 30 07:20:05 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 13.54"
[Thu May 30 12:17:58 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_src3.ximg exists
[Thu May 30 12:17:58 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_src3.csv
[Thu May 30 12:17:58 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu May 30 12:17:58 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_src3.csv
[Thu May 30 12:17:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 12:17:59 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu May 30 12:17:59 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu May 30 12:17:59 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu May 30 12:17:59 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu May 30 12:17:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 18:52:09 2013] Warning, spatial fit 3 centroid is now closest to src. 13
[Thu May 30 18:52:09 2013] Vigneting correction estimate = 1.000000
[Thu May 30 18:52:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 18:52:09 2013] Assessing source extent using major
[Thu May 30 18:52:09 2013] Source does appear to be extended
[Thu May 30 18:52:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 18:52:53 2013] XMMSAS src. selection expression = ellipse(40455.456085, 34873.533112, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 18:52:53 2013] Writing source region out to fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src5_src.reg
[Thu May 30 18:52:53 2013] Extracting stamp from image fullrun_pn_xmm0604980101_pi300-10000_cl_sm2.00.img.gz, (428, 364) - (503, 439)
[Thu May 30 18:52:53 2013] XMMSAS bgd. selection expression = annulus(40455.456085, 34873.533112, 1087.500000, 2175.000000, X, Y) && !ellipse(38819.044708, 35528.396088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37322.456000, 35538.476000, 1539.616044, 251.222407, 91.808690, X, Y) && !ellipse(37445.719200, 35044.395600, 2010.096058, 386.387211, 71.468700, X, Y) && !ellipse(40057.388000, 34863.678000, 1253.136036, 267.215208, 355.893210, X, Y) && !ellipse(37689.048309, 34655.204742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39582.366200, 33239.793600, 2069.376060, 258.672007, 157.752000, X, Y) && !ellipse(38631.518000, 32878.908000, 2020.880058, 2020.880058, 0.000000, X, Y) && !ellipse(37821.858185, 32781.133728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38705.664337, 36049.673920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40922.672211, 33962.465118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39174.326000, 34051.062000, 1301.624037, 291.006408, 355.722330, X, Y) && !ellipse(40421.742523, 33621.787689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36821.126000, 33718.754800, 1781.920051, 365.210411, 52.531800, X, Y) && !ellipse(36355.478800, 37563.086800, 2309.904066, 288.737608, 318.268000, X, Y) && !ellipse(36475.093000, 35096.276000, 1972.328057, 287.629608, 101.366800, X, Y) && !ellipse(40310.374664, 34257.314087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37445.680359, 32697.548096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37671.724243, 32170.033600, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 18:52:53 2013] Writing fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src5.gif
[Thu May 30 19:00:44 2013] Mean detx,y = (-14977.71, 10941.78) 
[Thu May 30 19:00:50 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 19:01:17 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 19:01:18 2013] Setting source spectrum file to fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu May 30 19:01:18 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu May 30 19:58:01 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 30 19:58:01 2013] rmf not generated due to insufficient counts
[Thu May 30 22:49:35 2013] Updating aperture counts using extracted products
[Thu May 30 22:49:35 2013] Total counts from fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 759.00
[Thu May 30 22:49:35 2013] Total counts from fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src5_bgd.pi.gz = 104.00
[Thu May 30 22:49:35 2013] Got source and background scale factors 806718.000000, 274364.000000
[Thu May 30 22:49:35 2013] User source parameters:
  Position = (465.6, 401.4) = 18 29 45.95 -23 52 16.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 453.2 +/- 28.6
  Background aperture counts = 305.8
  Rate = 0.01 +/- 0.0009

[Thu May 30 22:49:35 2013] Updating counts from extracted products
[Thu May 30 22:49:35 2013] Set source signif. to 453.21/17.49 = 25.92
[Thu May 30 22:49:48 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 22:49:48 2013] Using photon index=1.80, rate=0.0141, arf fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src5.arf
[Thu May 30 22:49:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 22:49:48 2013] Updating source flux to 4.8e-13
[Thu May 30 22:50:23 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 22:50:33 2013] xmm0604980101/analysis//spectral/fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete