[Wed May 29 20:49:09 2013] Detection parameters:
  Position = (212.5, 446.5) = 18 31 6.19 -23 49 2.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.7 +/- 19.2
  Background counts = 117.7
  Rate = 0.002 +/- 0.0004

[Wed May 29 20:49:09 2013] Off-axis axis estimate = 12.41'
[Wed May 29 20:53:28 2013] Using EEF radius (= 12.63 ")to estimate initial spatial extent for simple fitting
[Wed May 29 20:53:28 2013] Initial guess for spatial extent in simple fitting = 12.63"
[Wed May 29 20:53:28 2013] source mask rpix=2.9, npix_max = 46, mask sum = 48, frac = 1.036
[Wed May 29 20:53:28 2013] Giving source the simple spatial ID 46 for pass 0, mean size = 12.63"
[Thu May 30 00:39:01 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_src46.ximg exists
[Thu May 30 00:39:01 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_src46.csv
[Thu May 30 00:39:01 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_src46_1.ximg exists
[Thu May 30 00:39:01 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_src46.csv
[Thu May 30 00:39:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 00:39:02 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Thu May 30 00:39:02 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src46.csv
[Thu May 30 00:39:02 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Thu May 30 00:39:02 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src46.csv
[Thu May 30 00:39:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 07:19:17 2013] Warning: source 46 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 49 at 16.427947 pixels away
[Thu May 30 07:19:17 2013] Vigneting correction estimate = 1.000000
[Thu May 30 07:19:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 07:19:17 2013] Assessing source extent using major
[Thu May 30 07:19:17 2013] Source does appear to be extended
[Thu May 30 07:19:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 07:20:05 2013] Using EEF radius (= 12.63 ")to estimate initial spatial extent for simple fitting
[Thu May 30 07:20:05 2013] Initial guess for spatial extent in simple fitting = 12.63"
[Thu May 30 07:20:05 2013] source mask rpix=2.9, npix_max = 46, mask sum = 48, frac = 1.036
[Thu May 30 07:20:05 2013] Giving source the simple spatial ID 44 for pass 1, mean size = 12.63"
[Thu May 30 12:17:59 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_src44.ximg exists
[Thu May 30 12:17:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_src44.csv
[Thu May 30 12:17:59 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_src44_1.ximg exists
[Thu May 30 12:17:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_src44.csv
[Thu May 30 12:17:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 12:18:00 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Thu May 30 12:18:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src44.csv
[Thu May 30 12:18:00 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Thu May 30 12:18:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src44.csv
[Thu May 30 12:18:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 18:52:09 2013] Warning: source 44 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 49 at 12.197070 pixels away
[Thu May 30 18:52:09 2013] Vigneting correction estimate = 1.000000
[Thu May 30 18:52:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 18:52:09 2013] Assessing source extent using major
[Thu May 30 18:52:09 2013] Source does appear to be extended
[Thu May 30 18:52:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 18:52:55 2013] XMMSAS src. selection expression = ellipse(18439.837662, 38794.052917, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 18:52:55 2013] Writing source region out to fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src49_src.reg
[Thu May 30 18:52:55 2013] Extracting stamp from image fullrun_pn_xmm0604980101_pi300-10000_cl_sm2.00.img.gz, (175, 409) - (250, 484)
[Thu May 30 18:52:55 2013] XMMSAS bgd. selection expression = annulus(18439.837662, 38794.052917, 1087.500000, 2175.000000, X, Y)
[Thu May 30 18:52:55 2013] Writing fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src49.gif
[Thu May 30 19:42:45 2013] Mean detx,y = (6948.14, 13892.64) 
[Thu May 30 19:42:48 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 19:43:15 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 19:43:15 2013] Setting source spectrum file to fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Thu May 30 19:43:15 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Thu May 30 20:48:07 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 30 20:48:07 2013] rmf not generated due to insufficient counts
[Thu May 30 22:49:44 2013] Updating aperture counts using extracted products
[Thu May 30 22:49:44 2013] Total counts from fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src49_src_b10.pi.gz = 367.00
[Thu May 30 22:49:44 2013] Total counts from fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src49_bgd.pi.gz = 1353.00
[Thu May 30 22:49:44 2013] Got source and background scale factors 814003.000000, 2228404.000000
[Thu May 30 22:49:44 2013] User source parameters:
  Position = (212.5, 446.5) = 18 31 6.19 -23 49 2.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -127.2 +/- 20.2
  Background aperture counts = 494.2
  Rate = -0.004 +/- 0.0006

[Thu May 30 22:49:44 2013] Updating counts from extracted products
[Thu May 30 22:49:44 2013] Set source signif. to -127.23/22.23 = -5.72
[Thu May 30 22:49:48 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 22:49:48 2013] Using photon index=1.80, rate=-0.00397, arf fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src49.arf
[Thu May 30 22:49:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 22:49:48 2013] Updated flux is not positive, keeping original flux
[Thu May 30 22:50:23 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 22:50:33 2013] xmm0604980101/analysis//spectral/fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src49_pl.csv not found, spectral fit skipped or did not complete