[Wed May 29 20:49:09 2013] Detection parameters:
  Position = (426.1, 437.8) = 18 29 58.46 -23 49 39.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 184.3 +/- 21.4
  Background counts = 110.4
  Rate = 0.003 +/- 0.0004

[Wed May 29 20:49:09 2013] Off-axis axis estimate = 13.70'
[Wed May 29 20:53:28 2013] Using EEF radius (= 13.28 ")to estimate initial spatial extent for simple fitting
[Wed May 29 20:53:28 2013] Initial guess for spatial extent in simple fitting = 13.28"
[Wed May 29 20:53:28 2013] source mask rpix=3.1, npix_max = 50, mask sum = 46, frac = 0.911
[Wed May 29 20:53:28 2013] Giving source the simple spatial ID 45 for pass 0, mean size = 13.28"
[Thu May 30 00:39:01 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_src45.ximg exists
[Thu May 30 00:39:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_src45.csv
[Thu May 30 00:39:01 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_src45_1.ximg exists
[Thu May 30 00:39:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_src45.csv
[Thu May 30 00:39:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 00:39:02 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Thu May 30 00:39:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src45.csv
[Thu May 30 00:39:02 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Thu May 30 00:39:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src45.csv
[Thu May 30 00:39:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 07:19:17 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 12.069288 pixels away
[Thu May 30 07:19:17 2013] Source 48 is offset by 5.992622 and 3.888744 pixels which is larger than
2 X fitted extent = 1.526515 x 12.212138, not incorporating fit results
[Thu May 30 07:19:17 2013] Vigneting correction estimate = 1.000000
[Thu May 30 07:19:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 07:19:17 2013] Assessing source extent using major
[Thu May 30 07:19:17 2013] Source does appear to be extended
[Thu May 30 07:19:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 07:19:17 2013] Source is confused with source 21
[Thu May 30 07:20:05 2013] Using EEF radius (= 13.28 ")to estimate initial spatial extent for simple fitting
[Thu May 30 07:20:05 2013] Initial guess for spatial extent in simple fitting = 13.28"
[Thu May 30 07:20:05 2013] source mask rpix=3.1, npix_max = 50, mask sum = 46, frac = 0.911
[Thu May 30 07:20:05 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 13.28"
[Thu May 30 12:17:59 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_src43.ximg exists
[Thu May 30 12:17:59 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_src43.csv
[Thu May 30 12:17:59 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_src43_1.ximg exists
[Thu May 30 12:17:59 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_src43.csv
[Thu May 30 12:17:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 12:18:00 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Thu May 30 12:18:00 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src43.csv
[Thu May 30 12:18:00 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Thu May 30 12:18:00 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src43.csv
[Thu May 30 12:18:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 18:52:09 2013] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 18.227420 pixels away
[Thu May 30 18:52:09 2013] Vigneting correction estimate = 1.000000
[Thu May 30 18:52:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 18:52:09 2013] Assessing source extent using major
[Thu May 30 18:52:09 2013] Source does appear to be extended
[Thu May 30 18:52:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 18:52:55 2013] XMMSAS src. selection expression = ellipse(37026.252106, 38039.530762, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 18:52:55 2013] Writing source region out to fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src48_src.reg
[Thu May 30 18:52:55 2013] Extracting stamp from image fullrun_pn_xmm0604980101_pi300-10000_cl_sm2.00.img.gz, (389, 400) - (464, 475)
[Thu May 30 18:52:55 2013] XMMSAS bgd. selection expression = annulus(37026.252106, 38039.530762, 1087.500000, 2175.000000, X, Y) && !ellipse(38819.044708, 35528.396088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37322.456000, 35538.476000, 1539.616044, 251.222407, 91.808690, X, Y) && !ellipse(37445.719200, 35044.395600, 2010.096058, 386.387211, 71.468700, X, Y) && !ellipse(40057.388000, 34863.678000, 1253.136036, 267.215208, 355.893210, X, Y) && !ellipse(38705.664337, 36049.673920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36355.478800, 37563.086800, 2309.904066, 288.737608, 318.268000, X, Y) && !ellipse(37096.589142, 36588.342194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35022.799400, 35641.504000, 1838.520053, 342.255210, 108.784500, X, Y) && !ellipse(36747.782013, 35879.611328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36475.093000, 35096.276000, 1972.328057, 287.629608, 101.366800, X, Y) && !ellipse(34926.759400, 34834.796000, 1882.704054, 277.179208, 89.008806, X, Y) && !ellipse(34949.612000, 34615.358600, 1866.816054, 263.113608, 81.595960, X, Y)
[Thu May 30 18:52:55 2013] Writing fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src48.gif
[Thu May 30 19:42:00 2013] Mean detx,y = (-11460.69, 13920.12) 
[Thu May 30 19:42:03 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 19:42:27 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 19:42:28 2013] Setting source spectrum file to fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Thu May 30 19:42:28 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Thu May 30 20:47:50 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 30 20:47:50 2013] rmf not generated due to insufficient counts
[Thu May 30 22:49:44 2013] Updating aperture counts using extracted products
[Thu May 30 22:49:44 2013] Total counts from fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src48_src_b10.pi.gz = 453.00
[Thu May 30 22:49:44 2013] Total counts from fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src48_bgd.pi.gz = 843.00
[Thu May 30 22:49:44 2013] Got source and background scale factors 593715.000000, 0.000000
[Thu May 30 22:49:44 2013] Background scale factor is not positive, halting re-assessment of this source
[Thu May 30 22:49:48 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 22:49:48 2013] Using photon index=1.80, rate=0.00348, arf fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src48.arf
[Thu May 30 22:49:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 22:49:48 2013] Updating source flux to 6.7e-14
[Thu May 30 22:50:23 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 22:50:33 2013] xmm0604980101/analysis//spectral/fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src48_pl.csv not found, spectral fit skipped or did not complete