[Wed May 29 20:49:07 2013] Detection parameters:
  Position = (435.3, 377.4) = 18 29 55.54 -23 54 0.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 282.8 +/- 29.0
  Background counts = 127.4
  Rate = 0.005 +/- 0.0005

[Wed May 29 20:49:09 2013] Off-axis axis estimate = 11.45'
[Wed May 29 20:53:28 2013] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Wed May 29 20:53:28 2013] Initial guess for spatial extent in simple fitting = 12.16"
[Wed May 29 20:53:28 2013] source mask rpix=2.8, npix_max = 43, mask sum = 41, frac = 0.944
[Wed May 29 20:53:28 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 12.16"
[Thu May 30 00:39:00 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_src9.ximg exists
[Thu May 30 00:39:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_src9.csv
[Thu May 30 00:39:00 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu May 30 00:39:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_src9.csv
[Thu May 30 00:39:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 00:39:01 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu May 30 00:39:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Thu May 30 00:39:01 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu May 30 00:39:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Thu May 30 00:39:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 07:19:16 2013] Warning, spatial fit 9 centroid is now closest to src. 17
[Thu May 30 07:19:17 2013] Source 11 is offset by -3.818848 and -2.758210 pixels which is larger than
2 X fitted extent = 1.486212 x 1.486212, not incorporating fit results
[Thu May 30 07:19:17 2013] Vigneting correction estimate = 1.000000
[Thu May 30 07:19:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 07:19:17 2013] Assessing source extent using major
[Thu May 30 07:19:17 2013] Source does appear to be extended
[Thu May 30 07:19:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 07:19:17 2013] Source is confused with source 10
[Thu May 30 07:19:17 2013] Source is confused with source 36
[Thu May 30 07:19:17 2013] Source is confused with source 53
[Thu May 30 07:20:05 2013] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Thu May 30 07:20:05 2013] Initial guess for spatial extent in simple fitting = 12.16"
[Thu May 30 07:20:05 2013] source mask rpix=2.8, npix_max = 43, mask sum = 41, frac = 0.944
[Thu May 30 07:20:05 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 12.16"
[Thu May 30 12:17:58 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_src9.ximg exists
[Thu May 30 12:17:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_src9.csv
[Thu May 30 12:17:58 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu May 30 12:17:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_src9.csv
[Thu May 30 12:17:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 12:17:59 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu May 30 12:17:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Thu May 30 12:17:59 2013] fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu May 30 12:17:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Thu May 30 12:17:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 18:52:09 2013] Warning, spatial fit 9 centroid is now closest to src. 36
[Thu May 30 18:52:09 2013] Spatial fit model total counts = 977.232000, observed total counts = 810.000000
[Thu May 30 18:52:09 2013] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 30 18:52:09 2013] Vigneting correction estimate = 1.000000
[Thu May 30 18:52:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 18:52:09 2013] Assessing source extent using major
[Thu May 30 18:52:09 2013] Source does appear to be extended
[Thu May 30 18:52:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 18:52:53 2013] XMMSAS src. selection expression = ellipse(37821.858185, 32781.133728, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 18:52:53 2013] Writing source region out to fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src11_src.reg
[Thu May 30 18:52:53 2013] Extracting stamp from image fullrun_pn_xmm0604980101_pi300-10000_cl_sm2.00.img.gz, (398, 340) - (473, 415)
[Thu May 30 18:52:53 2013] XMMSAS bgd. selection expression = annulus(37821.858185, 32781.133728, 1087.500000, 2175.000000, X, Y) && !ellipse(38819.044708, 35528.396088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37322.456000, 35538.476000, 1539.616044, 251.222407, 91.808690, X, Y) && !ellipse(40455.456085, 34873.533112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37445.719200, 35044.395600, 2010.096058, 386.387211, 71.468700, X, Y) && !ellipse(40057.388000, 34863.678000, 1253.136036, 267.215208, 355.893210, X, Y) && !ellipse(37689.048309, 34655.204742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39582.366200, 33239.793600, 2069.376060, 258.672007, 157.752000, X, Y) && !ellipse(38631.518000, 32878.908000, 2020.880058, 2020.880058, 0.000000, X, Y) && !ellipse(39174.326000, 34051.062000, 1301.624037, 291.006408, 355.722330, X, Y) && !ellipse(40421.742523, 33621.787689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36821.126000, 33718.754800, 1781.920051, 365.210411, 52.531800, X, Y) && !ellipse(35022.799400, 35641.504000, 1838.520053, 342.255210, 108.784500, X, Y) && !ellipse(36475.093000, 35096.276000, 1972.328057, 287.629608, 101.366800, X, Y) && !ellipse(34926.759400, 34834.796000, 1882.704054, 277.179208, 89.008806, X, Y) && !ellipse(34949.612000, 34615.358600, 1866.816054, 263.113608, 81.595960, X, Y) && !ellipse(40310.374664, 34257.314087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36539.587891, 34233.697601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35028.082367, 34238.301422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35214.630035, 33801.065887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36533.600800, 32846.715607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37445.680359, 32697.548096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37671.724243, 32170.033600, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 18:52:53 2013] Writing fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src11.gif
[Thu May 30 19:15:10 2013] Mean detx,y = (-12578.51, 8846.21) 
[Thu May 30 19:15:14 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 19:15:32 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 19:15:33 2013] Setting source spectrum file to fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu May 30 19:15:33 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu May 30 20:14:05 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 30 20:14:05 2013] rmf not generated due to insufficient counts
[Thu May 30 22:49:36 2013] Updating aperture counts using extracted products
[Thu May 30 22:49:36 2013] Total counts from fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 648.00
[Thu May 30 22:49:36 2013] Total counts from fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src11_bgd.pi.gz = 577.00
[Thu May 30 22:49:36 2013] Got source and background scale factors 1084402.000000, 1686526.000000
[Thu May 30 22:49:36 2013] User source parameters:
  Position = (435.3, 377.4) = 18 29 55.54 -23 54 0.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 277.0 +/- 26.5
  Background aperture counts = 371.0
  Rate = 0.009 +/- 0.0008

[Thu May 30 22:49:36 2013] Updating counts from extracted products
[Thu May 30 22:49:36 2013] Set source signif. to 277.00/19.26 = 14.38
[Thu May 30 22:49:48 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 22:49:48 2013] Using photon index=1.80, rate=0.00863, arf fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src11.arf
[Thu May 30 22:49:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 22:49:48 2013] Updating source flux to 1.8e-13
[Thu May 30 22:50:23 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 22:50:33 2013] xmm0604980101/analysis//spectral/fullrun_pn_xmm0604980101_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete