[Wed May 29 20:49:13 2013] Detection parameters:
  Position = (425.3, 413.8) = 18 29 58.72 -23 51 24.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 430.7 +/- 29.4
  Background counts = 68.3
  Rate = 0.008 +/- 0.0005

[Wed May 29 20:49:15 2013] Off-axis axis estimate = 12.43'
[Thu May 30 04:08:15 2013] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting
[Thu May 30 04:08:15 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 30 04:08:15 2013] Initial guess for spatial extent in simple fitting = 12.64"
[Thu May 30 04:08:15 2013] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.056
[Thu May 30 04:08:15 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 12.64"
[Thu May 30 07:18:54 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_src8.ximg exists
[Thu May 30 07:18:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_src8.csv
[Thu May 30 07:18:54 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu May 30 07:18:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_src8.csv
[Thu May 30 07:18:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 07:18:55 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu May 30 07:18:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Thu May 30 07:18:55 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu May 30 07:18:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Thu May 30 07:18:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 07:19:43 2013] Warning, spatial fit 8 centroid is now closest to src. 11
[Thu May 30 07:19:43 2013] Vigneting correction estimate = 1.000000
[Thu May 30 07:19:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 07:19:43 2013] Assessing source extent using major
[Thu May 30 07:19:43 2013] Source does appear to be extended
[Thu May 30 07:19:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 07:19:43 2013] Source is confused with source 19
[Thu May 30 07:19:43 2013] Source is confused with source 8
[Thu May 30 07:19:43 2013] Source is confused with source 27
[Thu May 30 15:08:29 2013] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting
[Thu May 30 15:08:29 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 30 15:08:29 2013] Initial guess for spatial extent in simple fitting = 12.64"
[Thu May 30 15:08:29 2013] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.056
[Thu May 30 15:08:29 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 12.64"
[Thu May 30 18:51:45 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_src7.ximg exists
[Thu May 30 18:51:45 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_src7.csv
[Thu May 30 18:51:45 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu May 30 18:51:45 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_src7.csv
[Thu May 30 18:51:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 18:51:46 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu May 30 18:51:46 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Thu May 30 18:51:46 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu May 30 18:51:46 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Thu May 30 18:51:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 18:52:30 2013] Warning, spatial fit 7 centroid is now closest to src. 27
[Thu May 30 18:52:30 2013] Source 6 is offset by 3.721365 and 0.617776 pixels which is larger than
2 X fitted extent = 1.731582 x 1.731582, not incorporating fit results
[Thu May 30 18:52:30 2013] Source 6 is offset by -0.117716 and 9.218351 pixels which is larger than
2 X fitted extent = 2.154395 x 2.154395, not incorporating fit results
[Thu May 30 18:52:30 2013] Vigneting correction estimate = 1.000000
[Thu May 30 18:52:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 18:52:30 2013] Assessing source extent using major
[Thu May 30 18:52:30 2013] Source does appear to be extended
[Thu May 30 18:52:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 21:49:21 2013] XMMSAS src. selection expression = ellipse(36952.646729, 35948.992554, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 21:49:21 2013] Writing source region out to fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src6_src.reg
[Thu May 30 21:49:21 2013] Extracting stamp from image fullrun_mos2_xmm0604980101_pi300-10000_cl_sm2.00.img.gz, (388, 376) - (463, 451)
[Thu May 30 21:49:21 2013] XMMSAS bgd. selection expression = annulus(36952.646729, 35948.992554, 1087.500000, 2175.000000, X, Y) && !ellipse(36914.568000, 34488.010000, 1709.216049, 283.672808, 248.893000, X, Y) && !ellipse(36082.224579, 33796.849701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37740.993958, 34426.004028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35448.612457, 33968.287598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35811.478600, 35239.928000, 3155.432091, 901.848026, 111.139200, X, Y) && !ellipse(36093.835580, 36134.216000, 1966.312057, 973.152028, 90.000000, X, Y) && !ellipse(35511.940000, 34851.115000, 1898.152055, 255.576807, 101.937400, X, Y) && !ellipse(35958.442800, 35432.674000, 1940.288056, 1215.144035, 110.833500, X, Y) && !ellipse(35997.630000, 34115.653000, 1204.264035, 280.056808, 90.000000, X, Y) && !ellipse(36083.578000, 35201.094600, 1973.264057, 246.658407, 104.134700, X, Y) && !ellipse(36619.721985, 36308.802124, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 21:49:21 2013] Writing fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src6.gif
[Thu May 30 21:53:12 2013] Mean detx,y = (11573.71, -12137.38) 
[Thu May 30 21:53:13 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 21:53:26 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 21:53:26 2013] Setting source spectrum file to fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu May 30 21:53:26 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu May 30 22:18:24 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 30 22:18:24 2013] rmf not generated due to insufficient counts
[Thu May 30 22:49:59 2013] Updating aperture counts using extracted products
[Thu May 30 22:49:59 2013] Total counts from fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 991.00
[Thu May 30 22:49:59 2013] Total counts from fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src6_bgd.pi.gz = 0.00
[Thu May 30 22:49:59 2013] Got source and background scale factors 1042412.000000, 0.000000
[Thu May 30 22:49:59 2013] Background scale factor is not positive, halting re-assessment of this source
[Thu May 30 22:50:06 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 22:50:06 2013] Using photon index=1.80, rate=0.00765, arf fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src6.arf
[Thu May 30 22:50:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 22:50:06 2013] Updating source flux to 3.1e-13
[Thu May 30 22:50:16 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 22:50:23 2013] xmm0604980101/analysis//spectral/fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete