[Wed May 29 20:49:15 2013] Detection parameters:
  Position = (355.8, 323.6) = 18 30 20.74 -23 57 56.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.2 +/- 17.7
  Background counts = 107.3
  Rate = 0.002 +/- 0.0004

[Wed May 29 20:49:15 2013] Off-axis axis estimate = 4.54'
[Thu May 30 04:08:15 2013] Using EEF radius (= 8.70 ")to estimate initial spatial extent for simple fitting
[Thu May 30 04:08:15 2013] Initial guess for spatial extent in simple fitting = 8.70"
[Thu May 30 04:08:15 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 1.000
[Thu May 30 04:08:15 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 8.70"
[Thu May 30 07:18:55 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_src31.ximg exists
[Thu May 30 07:18:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_src31.csv
[Thu May 30 07:18:55 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_src31_1.ximg exists
[Thu May 30 07:18:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_src31.csv
[Thu May 30 07:18:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 07:18:55 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Thu May 30 07:18:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Thu May 30 07:18:55 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Thu May 30 07:18:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Thu May 30 07:18:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 07:19:43 2013] Source 31 is offset by 8.823328 and 4.579482 pixels which is larger than
2 X fitted extent = 7.645931 x 1.000046, not incorporating fit results
[Thu May 30 07:19:43 2013] Vigneting correction estimate = 1.000000
[Thu May 30 07:19:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 07:19:43 2013] Assessing source extent using major
[Thu May 30 07:19:43 2013] Source does appear to be extended
[Thu May 30 07:19:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 15:08:29 2013] Using EEF radius (= 8.70 ")to estimate initial spatial extent for simple fitting
[Thu May 30 15:08:29 2013] Initial guess for spatial extent in simple fitting = 8.70"
[Thu May 30 15:08:29 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 1.000
[Thu May 30 15:08:29 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 8.70"
[Thu May 30 18:51:46 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_src29.ximg exists
[Thu May 30 18:51:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_src29.csv
[Thu May 30 18:51:46 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_src29_1.ximg exists
[Thu May 30 18:51:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_src29.csv
[Thu May 30 18:51:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 18:51:47 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Thu May 30 18:51:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src29.csv
[Thu May 30 18:51:47 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Thu May 30 18:51:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src29.csv
[Thu May 30 18:51:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 18:52:30 2013] Source 31 is offset by 8.823328 and 4.622057 pixels which is larger than
2 X fitted extent = 7.578575 x 1.000046, not incorporating fit results
[Thu May 30 18:52:30 2013] Vigneting correction estimate = 1.000000
[Thu May 30 18:52:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 18:52:30 2013] Assessing source extent using major
[Thu May 30 18:52:30 2013] Source does appear to be extended
[Thu May 30 18:52:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 21:49:22 2013] XMMSAS src. selection expression = ellipse(30908.095520, 28107.044922, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 21:49:22 2013] Writing source region out to fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src31_src.reg
[Thu May 30 21:49:22 2013] Extracting stamp from image fullrun_mos2_xmm0604980101_pi300-10000_cl_sm2.00.img.gz, (318, 286) - (393, 361)
[Thu May 30 21:49:22 2013] XMMSAS bgd. selection expression = annulus(30908.095520, 28107.044922, 1087.500000, 2175.000000, X, Y)
[Thu May 30 21:49:22 2013] Writing fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src31.gif
[Thu May 30 22:07:46 2013] Mean detx,y = (6022.22, -4096.22) 
[Thu May 30 22:07:48 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 22:08:02 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 22:08:03 2013] Setting source spectrum file to fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Thu May 30 22:08:03 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Thu May 30 22:47:17 2013] Not generating rmf since there are only 95 counts
[Thu May 30 22:47:17 2013] rmf not generated due to insufficient counts
[Thu May 30 22:50:04 2013] Updating aperture counts using extracted products
[Thu May 30 22:50:04 2013] Total counts from fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 447.00
[Thu May 30 22:50:04 2013] Total counts from fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src31_bgd.pi.gz = 2919.00
[Thu May 30 22:50:04 2013] Got source and background scale factors 1240576.000000, 10529617.000000
[Thu May 30 22:50:04 2013] User source parameters:
  Position = (355.8, 323.6) = 18 30 20.74 -23 57 56.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 103.1 +/- 22.2
  Background aperture counts = 343.9
  Rate = 0.002 +/- 0.0005

[Thu May 30 22:50:04 2013] Updating counts from extracted products
[Thu May 30 22:50:04 2013] Set source signif. to 103.09/18.54 = 5.56
[Thu May 30 22:50:07 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 22:50:07 2013] Using photon index=1.80, rate=0.00214, arf fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src31.arf
[Thu May 30 22:50:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 22:50:07 2013] Updating source flux to 3.4e-14
[Thu May 30 22:50:16 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 22:50:23 2013] xmm0604980101/analysis//spectral/fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete