[Wed May 29 20:49:15 2013] Detection parameters:
  Position = (421.5, 417.9) = 18 29 59.94 -23 51 2.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 153.1 +/- 23.7
  Background counts = 69.0
  Rate = 0.003 +/- 0.0004

[Wed May 29 20:49:15 2013] Off-axis axis estimate = 12.43'
[Thu May 30 04:08:15 2013] Using EEF radius (= 12.65 ")to estimate initial spatial extent for simple fitting
[Thu May 30 04:08:15 2013] Initial guess for spatial extent in simple fitting = 12.65"
[Thu May 30 04:08:15 2013] source mask rpix=2.9, npix_max = 46, mask sum = 48, frac = 1.034
[Thu May 30 04:08:15 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 12.65"
[Thu May 30 07:18:55 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_src27.ximg exists
[Thu May 30 07:18:55 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_src27.csv
[Thu May 30 07:18:55 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_src27_1.ximg exists
[Thu May 30 07:18:55 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_src27.csv
[Thu May 30 07:18:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 07:18:55 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Thu May 30 07:18:55 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Thu May 30 07:18:55 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Thu May 30 07:18:55 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Thu May 30 07:18:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 07:19:43 2013] Spatial fit model total counts = -1.198140, observed total counts = 1779.000000
[Thu May 30 07:19:43 2013] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 30 07:19:43 2013] Warning, spatial fit 27 centroid is now closest to src. 10
[Thu May 30 07:19:43 2013] Vigneting correction estimate = 1.000000
[Thu May 30 07:19:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 07:19:43 2013] Assessing source extent using major
[Thu May 30 07:19:43 2013] Source does appear to be extended
[Thu May 30 07:19:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 07:19:43 2013] Source is confused with source 6
[Thu May 30 15:08:29 2013] Using EEF radius (= 12.65 ")to estimate initial spatial extent for simple fitting
[Thu May 30 15:08:29 2013] Initial guess for spatial extent in simple fitting = 12.65"
[Thu May 30 15:08:29 2013] source mask rpix=2.9, npix_max = 46, mask sum = 48, frac = 1.034
[Thu May 30 15:08:29 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 12.65"
[Thu May 30 18:51:46 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_src25.ximg exists
[Thu May 30 18:51:46 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_src25.csv
[Thu May 30 18:51:46 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_src25_1.ximg exists
[Thu May 30 18:51:46 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_src25.csv
[Thu May 30 18:51:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 18:51:46 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Thu May 30 18:51:46 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Thu May 30 18:51:46 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Thu May 30 18:51:47 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Thu May 30 18:51:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 18:52:30 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 11.906289 pixels away
[Thu May 30 18:52:30 2013] Warning, spatial fit 25 centroid is now closest to src. 8
[Thu May 30 18:52:30 2013] Vigneting correction estimate = 1.000000
[Thu May 30 18:52:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 18:52:30 2013] Assessing source extent using major
[Thu May 30 18:52:30 2013] Source does appear to be extended
[Thu May 30 18:52:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 21:49:22 2013] XMMSAS src. selection expression = ellipse(36619.721985, 36308.802124, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 21:49:22 2013] Writing source region out to fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src27_src.reg
[Thu May 30 21:49:22 2013] Extracting stamp from image fullrun_mos2_xmm0604980101_pi300-10000_cl_sm2.00.img.gz, (384, 380) - (459, 455)
[Thu May 30 21:49:22 2013] XMMSAS bgd. selection expression = annulus(36619.721985, 36308.802124, 1087.500000, 2175.000000, X, Y) && !ellipse(36914.568000, 34488.010000, 1709.216049, 283.672808, 248.893000, X, Y) && !ellipse(36082.224579, 33796.849701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37740.993958, 34426.004028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36952.646729, 35948.992554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35448.612457, 33968.287598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35811.478600, 35239.928000, 3155.432091, 901.848026, 111.139200, X, Y) && !ellipse(36093.835580, 36134.216000, 1966.312057, 973.152028, 90.000000, X, Y) && !ellipse(35511.940000, 34851.115000, 1898.152055, 255.576807, 101.937400, X, Y) && !ellipse(35958.442800, 35432.674000, 1940.288056, 1215.144035, 110.833500, X, Y) && !ellipse(35997.630000, 34115.653000, 1204.264035, 280.056808, 90.000000, X, Y) && !ellipse(36083.578000, 35201.094600, 1973.264057, 246.658407, 104.134700, X, Y)
[Thu May 30 21:49:22 2013] Writing fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src27.gif
[Thu May 30 22:06:23 2013] Mean detx,y = (11213.10, -12413.34) 
[Thu May 30 22:06:25 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 22:06:39 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 22:06:39 2013] Setting source spectrum file to fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Thu May 30 22:06:39 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Thu May 30 22:46:45 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 30 22:46:45 2013] rmf not generated due to insufficient counts
[Thu May 30 22:50:03 2013] Updating aperture counts using extracted products
[Thu May 30 22:50:03 2013] Total counts from fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 790.00
[Thu May 30 22:50:03 2013] Total counts from fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src27_bgd.pi.gz = 71.00
[Thu May 30 22:50:03 2013] Got source and background scale factors 998938.000000, 114305.000000
[Thu May 30 22:50:03 2013] User source parameters:
  Position = (421.5, 417.9) = 18 29 59.94 -23 51 2.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 169.5 +/- 29.1
  Background aperture counts = 620.5
  Rate = 0.004 +/- 0.0006

[Thu May 30 22:50:03 2013] Updating counts from extracted products
[Thu May 30 22:50:03 2013] Set source signif. to 169.51/24.91 = 6.81
[Thu May 30 22:50:07 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 22:50:07 2013] Using photon index=1.80, rate=0.00352, arf fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src27.arf
[Thu May 30 22:50:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 22:50:07 2013] Updating source flux to 1.5e-13
[Thu May 30 22:50:16 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 22:50:23 2013] xmm0604980101/analysis//spectral/fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete