[Wed May 29 20:49:14 2013] Detection parameters:
  Position = (92.2, 267.9) = 18 31 44.43 -24 1 57.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 205.6 +/- 21.8
  Background counts = 77.7
  Rate = 0.004 +/- 0.0004

[Wed May 29 20:49:15 2013] Off-axis axis estimate = 15.11'
[Thu May 30 04:08:15 2013] Using EEF radius (= 13.99 ")to estimate initial spatial extent for simple fitting
[Thu May 30 04:08:15 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 30 04:08:15 2013] Initial guess for spatial extent in simple fitting = 13.99"
[Thu May 30 04:08:15 2013] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.014
[Thu May 30 04:08:15 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 13.99"
[Thu May 30 07:18:55 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_src23.ximg exists
[Thu May 30 07:18:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_src23.csv
[Thu May 30 07:18:55 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu May 30 07:18:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_src23.csv
[Thu May 30 07:18:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 07:18:55 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu May 30 07:18:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src23.csv
[Thu May 30 07:18:55 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu May 30 07:18:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src23.csv
[Thu May 30 07:18:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 07:19:43 2013] Spatial fit model total counts = 649.794000, observed total counts = 484.000000
[Thu May 30 07:19:43 2013] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 30 07:19:43 2013] Vigneting correction estimate = 1.000000
[Thu May 30 07:19:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 07:19:43 2013] Assessing source extent using major
[Thu May 30 07:19:43 2013] Source does appear to be extended
[Thu May 30 07:19:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 15:08:29 2013] Using EEF radius (= 13.99 ")to estimate initial spatial extent for simple fitting
[Thu May 30 15:08:29 2013] Initial guess for spatial extent in simple fitting = 13.99"
[Thu May 30 15:08:29 2013] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.014
[Thu May 30 15:08:29 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 13.99"
[Thu May 30 18:51:46 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_src21.ximg exists
[Thu May 30 18:51:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_src21.csv
[Thu May 30 18:51:46 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_src21_1.ximg exists
[Thu May 30 18:51:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_src21.csv
[Thu May 30 18:51:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 18:51:46 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Thu May 30 18:51:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Thu May 30 18:51:46 2013] fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Thu May 30 18:51:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Thu May 30 18:51:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 18:52:30 2013] Spatial fit model total counts = 1124.760000, observed total counts = 770.000000
[Thu May 30 18:52:30 2013] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 30 18:52:30 2013] Vigneting correction estimate = 1.000000
[Thu May 30 18:52:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 18:52:30 2013] Assessing source extent using major
[Thu May 30 18:52:30 2013] Source does appear to be extended
[Thu May 30 18:52:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 21:49:22 2013] XMMSAS src. selection expression = ellipse(7974.750290, 23262.059845, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 21:49:22 2013] Writing source region out to fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src18_src.reg
[Thu May 30 21:49:22 2013] Extracting stamp from image fullrun_mos2_xmm0604980101_pi300-10000_cl_sm2.00.img.gz, (55, 230) - (130, 305)
[Thu May 30 21:49:22 2013] XMMSAS bgd. selection expression = annulus(7974.750290, 23262.059845, 1087.500000, 2175.000000, X, Y) && !ellipse(9329.715286, 23184.161285, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 21:49:22 2013] Writing fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src18.gif
[Thu May 30 22:05:00 2013] Mean detx,y = (-16532.84, 2014.24) 
[Thu May 30 22:05:01 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 22:05:17 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 22:05:17 2013] Setting source spectrum file to fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu May 30 22:05:17 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Thu May 30 22:46:18 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 30 22:46:18 2013] rmf not generated due to insufficient counts
[Thu May 30 22:50:02 2013] Updating aperture counts using extracted products
[Thu May 30 22:50:02 2013] Total counts from fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 331.00
[Thu May 30 22:50:02 2013] Total counts from fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src18_bgd.pi.gz = 850.00
[Thu May 30 22:50:02 2013] Got source and background scale factors 1064456.000000, 3883914.000000
[Thu May 30 22:50:02 2013] User source parameters:
  Position = (92.2, 267.9) = 18 31 44.43 -24 1 57.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 98.0 +/- 19.2
  Background aperture counts = 233.0
  Rate = 0.002 +/- 0.0004

[Thu May 30 22:50:02 2013] Updating counts from extracted products
[Thu May 30 22:50:02 2013] Set source signif. to 98.04/15.26 = 6.42
[Thu May 30 22:50:07 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 22:50:07 2013] Using photon index=1.80, rate=0.00204, arf fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src18.arf
[Thu May 30 22:50:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 22:50:07 2013] Updating source flux to 6.5e-14
[Thu May 30 22:50:16 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 22:50:23 2013] xmm0604980101/analysis//spectral/fullrun_mos2_xmm0604980101_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete