[Wed May 29 20:49:10 2013] Detection parameters:
  Position = (439.4, 400.9) = 18 29 54.23 -23 52 18.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 722.9 +/- 31.9
  Background counts = 65.7
  Rate = 0.01 +/- 0.0006

[Wed May 29 20:49:12 2013] Off-axis axis estimate = 12.63'
[Thu May 30 00:39:02 2013] Using EEF radius (= 12.75 ")to estimate initial spatial extent for simple fitting
[Thu May 30 00:39:02 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 30 00:39:02 2013] Initial guess for spatial extent in simple fitting = 12.75"
[Thu May 30 00:39:02 2013] source mask rpix=2.9, npix_max = 47, mask sum = 39, frac = 0.829
[Thu May 30 00:39:02 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 12.75"
[Thu May 30 04:08:12 2013] fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_src2.ximg exists
[Thu May 30 04:08:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_src2.csv
[Thu May 30 04:08:12 2013] fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu May 30 04:08:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_src2.csv
[Thu May 30 04:08:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 04:08:13 2013] fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu May 30 04:08:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu May 30 04:08:13 2013] fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu May 30 04:08:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu May 30 04:08:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 07:19:30 2013] Warning, spatial fit 2 centroid is now closest to src. 7
[Thu May 30 07:19:30 2013] Vigneting correction estimate = 1.000000
[Thu May 30 07:19:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 07:19:30 2013] Assessing source extent using major
[Thu May 30 07:19:30 2013] Source does appear to be extended
[Thu May 30 07:19:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 12:18:00 2013] Using EEF radius (= 12.75 ")to estimate initial spatial extent for simple fitting
[Thu May 30 12:18:00 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 30 12:18:00 2013] Initial guess for spatial extent in simple fitting = 12.75"
[Thu May 30 12:18:00 2013] source mask rpix=2.9, npix_max = 47, mask sum = 39, frac = 0.829
[Thu May 30 12:18:00 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 12.75"
[Thu May 30 15:08:26 2013] fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_src2.ximg exists
[Thu May 30 15:08:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_src2.csv
[Thu May 30 15:08:26 2013] fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu May 30 15:08:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_src2.csv
[Thu May 30 15:08:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 15:08:27 2013] fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu May 30 15:08:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu May 30 15:08:27 2013] fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu May 30 15:08:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu May 30 15:08:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 18:52:20 2013] Warning, spatial fit 2 centroid is now closest to src. 7
[Thu May 30 18:52:20 2013] Spatial fit model total counts = 772.944000, observed total counts = 1083.000000
[Thu May 30 18:52:20 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 30 18:52:20 2013] Vigneting correction estimate = 1.000000
[Thu May 30 18:52:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 18:52:20 2013] Assessing source extent using major
[Thu May 30 18:52:20 2013] Source does appear to be extended
[Thu May 30 18:52:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 18:52:20 2013] Source is confused with source 1
[Thu May 30 20:54:09 2013] XMMSAS src. selection expression = ellipse(38182.586395, 34826.326691, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 20:54:09 2013] Writing source region out to fullrun_mos1_xmm0604980101_pi300-10000_pass1_cl_src2_src.reg
[Thu May 30 20:54:09 2013] Extracting stamp from image fullrun_mos1_xmm0604980101_pi300-10000_cl_sm2.00.img.gz, (402, 363) - (477, 438)
[Thu May 30 20:54:09 2013] XMMSAS bgd. selection expression = annulus(38182.586395, 34826.326691, 1087.500000, 2175.000000, X, Y) && !ellipse(36721.771800, 35230.364000, 2262.680065, 282.835208, 99.762590, X, Y) && !ellipse(36939.671600, 35884.849701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36773.995117, 35533.026459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37167.674896, 33782.653259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39276.100037, 32774.583771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35404.228333, 32841.296692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35186.234497, 33532.453918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35207.930000, 34599.738400, 1875.512054, 234.438407, 101.618200, X, Y) && !ellipse(35356.496216, 35182.801544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34577.087116, 33215.955400, 1695.192049, 296.111209, 73.333000, X, Y) && !ellipse(35560.037200, 35582.764800, 2191.464063, 273.932808, 117.423900, X, Y) && !ellipse(34728.564000, 36889.014000, 1516.992044, 255.192007, 130.968600, X, Y) && !ellipse(34485.390360, 33746.562800, 1800.408052, 282.546408, 85.253370, X, Y) && !ellipse(34506.354020, 34434.724000, 1833.984053, 229.500807, 98.366830, X, Y) && !ellipse(36056.598236, 36382.787170, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 20:54:09 2013] Writing fullrun_mos1_xmm0604980101_pi300-10000_pass1_cl_src2.gif
[Thu May 30 20:54:14 2013] Mean detx,y = (-10902.63, -13093.83) 
[Thu May 30 20:54:16 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 20:54:30 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 20:54:30 2013] Setting source spectrum file to fullrun_mos1_xmm0604980101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 30 20:54:30 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0604980101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu May 30 21:09:07 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 30 21:09:07 2013] rmf not generated due to insufficient counts
[Thu May 30 22:49:49 2013] Updating aperture counts using extracted products
[Thu May 30 22:49:49 2013] Total counts from fullrun_mos1_xmm0604980101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 783.00
[Thu May 30 22:49:49 2013] Total counts from fullrun_mos1_xmm0604980101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 277.00
[Thu May 30 22:49:49 2013] Got source and background scale factors 761418.000000, 1067508.000000
[Thu May 30 22:49:49 2013] User source parameters:
  Position = (439.4, 400.9) = 18 29 54.23 -23 52 18.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 585.4 +/- 29.0
  Background aperture counts = 197.6
  Rate = 0.01 +/- 0.0006

[Thu May 30 22:49:49 2013] Updating counts from extracted products
[Thu May 30 22:49:49 2013] Set source signif. to 585.43/14.06 = 41.65
[Thu May 30 22:49:56 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 22:49:56 2013] Using photon index=1.80, rate=0.0121, arf fullrun_mos1_xmm0604980101_pi300-10000_pass1_cl_src2.arf
[Thu May 30 22:49:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 22:49:56 2013] Updating source flux to 9.8e-13
[Thu May 30 22:50:09 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 22:50:16 2013] xmm0604980101/analysis//spectral/fullrun_mos1_xmm0604980101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete