[Wed May 29 20:49:11 2013] Detection parameters:
  Position = (425.2, 413.0) = 18 29 58.77 -23 51 29.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 502.6 +/- 31.6
  Background counts = 68.0
  Rate = 0.009 +/- 0.0006

[Wed May 29 20:49:12 2013] Off-axis axis estimate = 12.39'
[Thu May 30 00:39:02 2013] Using EEF radius (= 12.62 ")to estimate initial spatial extent for simple fitting
[Thu May 30 00:39:02 2013] Initial guess for spatial extent in simple fitting = 12.62"
[Thu May 30 00:39:02 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.907
[Thu May 30 00:39:02 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 12.62"
[Thu May 30 04:08:12 2013] fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_src5.ximg exists
[Thu May 30 04:08:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_src5.csv
[Thu May 30 04:08:12 2013] fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu May 30 04:08:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_src5.csv
[Thu May 30 04:08:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 04:08:14 2013] fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu May 30 04:08:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu May 30 04:08:14 2013] fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu May 30 04:08:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu May 30 04:08:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 07:19:30 2013] Warning, spatial fit 5 centroid is now closest to src. 19
[Thu May 30 07:19:30 2013] Vigneting correction estimate = 1.000000
[Thu May 30 07:19:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 07:19:30 2013] Assessing source extent using major
[Thu May 30 07:19:30 2013] Source does appear to be extended
[Thu May 30 07:19:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 07:19:30 2013] Source is confused with source 1
[Thu May 30 12:18:00 2013] Using EEF radius (= 12.62 ")to estimate initial spatial extent for simple fitting
[Thu May 30 12:18:00 2013] Initial guess for spatial extent in simple fitting = 12.62"
[Thu May 30 12:18:00 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.907
[Thu May 30 12:18:00 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 12.62"
[Thu May 30 15:08:26 2013] fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_src5.ximg exists
[Thu May 30 15:08:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_src5.csv
[Thu May 30 15:08:26 2013] fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu May 30 15:08:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_src5.csv
[Thu May 30 15:08:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 15:08:27 2013] fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu May 30 15:08:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu May 30 15:08:27 2013] fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu May 30 15:08:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu May 30 15:08:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 18:52:20 2013] Warning, spatial fit 5 centroid is now closest to src. 2
[Thu May 30 18:52:20 2013] Source 18 is offset by -1.430166 and -7.433544 pixels which is larger than
2 X fitted extent = 1.433614 x 1.433614, not incorporating fit results
[Thu May 30 18:52:20 2013] Vigneting correction estimate = 1.000000
[Thu May 30 18:52:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 18:52:20 2013] Assessing source extent using major
[Thu May 30 18:52:20 2013] Source does appear to be extended
[Thu May 30 18:52:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 20:54:09 2013] XMMSAS src. selection expression = ellipse(36939.671600, 35884.849701, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 20:54:09 2013] Writing source region out to fullrun_mos1_xmm0604980101_pi300-10000_pass1_cl_src18_src.reg
[Thu May 30 20:54:09 2013] Extracting stamp from image fullrun_mos1_xmm0604980101_pi300-10000_cl_sm2.00.img.gz, (388, 376) - (463, 451)
[Thu May 30 20:54:09 2013] XMMSAS bgd. selection expression = annulus(36939.671600, 35884.849701, 1087.500000, 2175.000000, X, Y) && !ellipse(38182.586395, 34826.326691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36721.771800, 35230.364000, 2262.680065, 282.835208, 99.762590, X, Y) && !ellipse(36773.995117, 35533.026459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37167.674896, 33782.653259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35404.228333, 32841.296692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35186.234497, 33532.453918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35207.930000, 34599.738400, 1875.512054, 234.438407, 101.618200, X, Y) && !ellipse(35356.496216, 35182.801544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33330.141400, 33351.284800, 1732.816050, 238.510407, 84.228830, X, Y) && !ellipse(34577.087116, 33215.955400, 1695.192049, 296.111209, 73.333000, X, Y) && !ellipse(35560.037200, 35582.764800, 2191.464063, 273.932808, 117.423900, X, Y) && !ellipse(34728.564000, 36889.014000, 1516.992044, 255.192007, 130.968600, X, Y) && !ellipse(34592.150452, 34836.986633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34485.390360, 33746.562800, 1800.408052, 282.546408, 85.253370, X, Y) && !ellipse(34506.354020, 34434.724000, 1833.984053, 229.500807, 98.366830, X, Y) && !ellipse(34776.651093, 35365.467560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36056.598236, 36382.787170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34976.410187, 35871.492249, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 20:54:09 2013] Writing fullrun_mos1_xmm0604980101_pi300-10000_pass1_cl_src18.gif
[Thu May 30 20:55:38 2013] Mean detx,y = (-11803.21, -11814.05) 
[Thu May 30 20:55:39 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 20:55:51 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 20:55:51 2013] Setting source spectrum file to fullrun_mos1_xmm0604980101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu May 30 20:55:51 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0604980101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Thu May 30 21:16:34 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 30 21:16:34 2013] rmf not generated due to insufficient counts
[Thu May 30 22:49:49 2013] Updating aperture counts using extracted products
[Thu May 30 22:49:49 2013] Total counts from fullrun_mos1_xmm0604980101_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 802.00
[Thu May 30 22:49:49 2013] Total counts from fullrun_mos1_xmm0604980101_pi300-10000_pass1_cl_src18_bgd.pi.gz = 125.00
[Thu May 30 22:49:49 2013] Got source and background scale factors 1100032.000000, 280467.000000
[Thu May 30 22:49:49 2013] User source parameters:
  Position = (425.2, 413.0) = 18 29 58.77 -23 51 29.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 311.7 +/- 29.3
  Background aperture counts = 490.3
  Rate = 0.006 +/- 0.0006

[Thu May 30 22:49:49 2013] Updating counts from extracted products
[Thu May 30 22:49:49 2013] Set source signif. to 311.73/22.14 = 14.08
[Thu May 30 22:49:56 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 22:49:56 2013] Using photon index=1.80, rate=0.00647, arf fullrun_mos1_xmm0604980101_pi300-10000_pass1_cl_src18.arf
[Thu May 30 22:49:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 22:49:56 2013] Updating source flux to 2.6e-13
[Thu May 30 22:50:09 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 22:50:16 2013] xmm0604980101/analysis//spectral/fullrun_mos1_xmm0604980101_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete