[Wed May 29 20:49:10 2013] Detection parameters:
  Position = (452.0, 377.3) = 18 29 50.24 -23 54 0.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 304.3 +/- 25.5
  Background counts = 67.5
  Rate = 0.005 +/- 0.0005

[Wed May 29 20:49:12 2013] Off-axis axis estimate = 12.52'
[Thu May 30 00:39:02 2013] Using EEF radius (= 12.69 ")to estimate initial spatial extent for simple fitting
[Thu May 30 00:39:02 2013] Initial guess for spatial extent in simple fitting = 12.69"
[Thu May 30 00:39:02 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.900
[Thu May 30 00:39:02 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 12.69"
[Thu May 30 04:08:13 2013] fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_src8.ximg exists
[Thu May 30 04:08:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_src8.csv
[Thu May 30 04:08:13 2013] fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu May 30 04:08:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_src8.csv
[Thu May 30 04:08:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 04:08:14 2013] fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu May 30 04:08:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Thu May 30 04:08:14 2013] fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu May 30 04:08:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Thu May 30 04:08:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604980101_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 07:19:30 2013] Warning, spatial fit 8 centroid is now closest to src. 13
[Thu May 30 07:19:30 2013] Source 10 is offset by 5.639357 and 1.629859 pixels which is larger than
2 X fitted extent = 1.393425 x 1.393425, not incorporating fit results
[Thu May 30 07:19:30 2013] Vigneting correction estimate = 1.000000
[Thu May 30 07:19:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 07:19:30 2013] Assessing source extent using major
[Thu May 30 07:19:30 2013] Source does appear to be extended
[Thu May 30 07:19:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 12:18:00 2013] Using EEF radius (= 12.69 ")to estimate initial spatial extent for simple fitting
[Thu May 30 12:18:00 2013] Initial guess for spatial extent in simple fitting = 12.69"
[Thu May 30 12:18:00 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.900
[Thu May 30 12:18:00 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 12.69"
[Thu May 30 15:08:26 2013] fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_src8.ximg exists
[Thu May 30 15:08:26 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_src8.csv
[Thu May 30 15:08:26 2013] fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu May 30 15:08:26 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_src8.csv
[Thu May 30 15:08:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 15:08:27 2013] fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu May 30 15:08:27 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu May 30 15:08:27 2013] fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu May 30 15:08:27 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu May 30 15:08:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604980101_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 18:52:20 2013] Warning, spatial fit 8 centroid is now closest to src. 13
[Thu May 30 18:52:20 2013] Source 10 is offset by 0.110828 and 2.165101 pixels which is larger than
2 X fitted extent = 1.851067 x 1.851067, not incorporating fit results
[Thu May 30 18:52:20 2013] Source 10 is offset by 0.359495 and 1.629423 pixels which is larger than
2 X fitted extent = 1.393425 x 1.393425, not incorporating fit results
[Thu May 30 18:52:20 2013] Vigneting correction estimate = 1.000000
[Thu May 30 18:52:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 18:52:20 2013] Assessing source extent using major
[Thu May 30 18:52:20 2013] Source does appear to be extended
[Thu May 30 18:52:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 20:54:09 2013] XMMSAS src. selection expression = ellipse(39276.100037, 32774.583771, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 20:54:09 2013] Writing source region out to fullrun_mos1_xmm0604980101_pi300-10000_pass1_cl_src10_src.reg
[Thu May 30 20:54:09 2013] Extracting stamp from image fullrun_mos1_xmm0604980101_pi300-10000_cl_sm2.00.img.gz, (415, 340) - (490, 415)
[Thu May 30 20:54:09 2013] XMMSAS bgd. selection expression = annulus(39276.100037, 32774.583771, 1087.500000, 2175.000000, X, Y) && !ellipse(38182.586395, 34826.326691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36721.771800, 35230.364000, 2262.680065, 282.835208, 99.762590, X, Y) && !ellipse(36773.995117, 35533.026459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37167.674896, 33782.653259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39701.956000, 32144.340000, 466.724013, 248.092007, 336.318700, X, Y) && !ellipse(38319.960266, 31650.701904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39142.079468, 31462.014282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35560.037200, 35582.764800, 2191.464063, 273.932808, 117.423900, X, Y)
[Thu May 30 20:54:09 2013] Writing fullrun_mos1_xmm0604980101_pi300-10000_pass1_cl_src10.gif
[Thu May 30 20:56:28 2013] Mean detx,y = (-8904.29, -14300.86) 
[Thu May 30 20:56:29 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 20:56:40 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 20:56:40 2013] Setting source spectrum file to fullrun_mos1_xmm0604980101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu May 30 20:56:40 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0604980101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu May 30 21:17:13 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 30 21:17:13 2013] rmf not generated due to insufficient counts
[Thu May 30 22:49:50 2013] Updating aperture counts using extracted products
[Thu May 30 22:49:50 2013] Total counts from fullrun_mos1_xmm0604980101_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 458.00
[Thu May 30 22:49:50 2013] Total counts from fullrun_mos1_xmm0604980101_pi300-10000_pass1_cl_src10_bgd.pi.gz = 414.00
[Thu May 30 22:49:50 2013] Got source and background scale factors 1137100.000000, 1622670.000000
[Thu May 30 22:49:50 2013] User source parameters:
  Position = (452.0, 377.3) = 18 29 50.24 -23 54 0.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 167.9 +/- 22.4
  Background aperture counts = 290.1
  Rate = 0.003 +/- 0.0005

[Thu May 30 22:49:50 2013] Updating counts from extracted products
[Thu May 30 22:49:50 2013] Set source signif. to 167.89/17.03 = 9.86
[Thu May 30 22:49:56 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 22:49:56 2013] Using photon index=1.80, rate=0.00348, arf fullrun_mos1_xmm0604980101_pi300-10000_pass1_cl_src10.arf
[Thu May 30 22:49:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 22:49:56 2013] Updating source flux to 1.4e-13
[Thu May 30 22:50:09 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 22:50:16 2013] xmm0604980101/analysis//spectral/fullrun_mos1_xmm0604980101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete