[Tue Jan 17 17:27:16 2012] Detection parameters:
  Position = (367.9, 335.3) = 3 32 8.70 -27 47 36.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 373.2 +/- 26.0
  Background counts = 59.7
  Rate = 0.02 +/- 0.001

[Tue Jan 17 17:27:16 2012] Off-axis axis estimate = 5.70'
[Tue Jan 17 17:47:59 2012] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 17:47:59 2012] Initial guess for spatial extent in simple fitting = 9.28"
[Tue Jan 17 17:47:59 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.082
[Tue Jan 17 17:47:59 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.28"
[Tue Jan 17 18:01:41 2012] fullrun_mos2_xmm0604961301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jan 17 18:01:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604961301_pi300-10000_cl_pass0_src1.csv
[Tue Jan 17 18:01:41 2012] fullrun_mos2_xmm0604961301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jan 17 18:01:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604961301_pi300-10000_cl_pass0_src1.csv
[Tue Jan 17 18:01:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604961301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604961301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 18:01:41 2012] fullrun_mos2_xmm0604961301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jan 17 18:01:41 2012] fullrun_mos2_xmm0604961301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jan 17 18:01:41 2012] Fit fullrun_mos2_xmm0604961301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jan 17 18:01:46 2012] Spatial fit model total counts = 363.000000, observed total counts = 363.000000
[Tue Jan 17 18:01:46 2012] Offset between fit and detection position for source 1 = 0.237927 pixels
[Tue Jan 17 18:01:46 2012] 362.760000 total counts/ 183.081000 bgd. counts: snr = 13.279315
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.237927 pixels
  Position = (367.7, 335.5) = 3 32 8.76 -27 47 36.0
  Extent = 5.2 (4.4-5.9)", rotation angle = 0
  Source counts = 179.7 +/- 19.0
  Background counts = 183.1
  Rate = 0.01 +/- 0.001
[Tue Jan 17 18:01:46 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 18:01:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 18:01:46 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 18:01:46 2012] Source does appear to be extended
[Tue Jan 17 18:01:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 18:21:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 18:21:00 2012] Initial guess for spatial extent in simple fitting = 5.18"
[Tue Jan 17 18:21:00 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.787
[Tue Jan 17 18:21:00 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.18"
[Tue Jan 17 18:32:07 2012] fullrun_mos2_xmm0604961301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jan 17 18:32:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604961301_pi300-10000_cl_pass1_src1.csv
[Tue Jan 17 18:32:07 2012] fullrun_mos2_xmm0604961301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jan 17 18:32:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604961301_pi300-10000_cl_pass1_src1.csv
[Tue Jan 17 18:32:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604961301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604961301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 18:32:08 2012] fullrun_mos2_xmm0604961301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jan 17 18:32:08 2012] fullrun_mos2_xmm0604961301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jan 17 18:32:08 2012] Fit fullrun_mos2_xmm0604961301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jan 17 18:32:13 2012] Spatial fit model total counts = 344.000000, observed total counts = 344.000000
[Tue Jan 17 18:32:13 2012] Offset between fit and detection position for source 1 = 0.009003 pixels
[Tue Jan 17 18:32:13 2012] 344.994000 total counts/ 166.569000 bgd. counts: snr = 13.824792
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.009003 pixels
  Position = (367.7, 335.5) = 3 32 8.76 -27 47 36.0
  Extent = 5.1 (4.4-5.8)", rotation angle = 0
  Source counts = 178.4 +/- 18.6
  Background counts = 166.6
  Rate = 0.01 +/- 0.001
[Tue Jan 17 18:32:13 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 18:32:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 18:32:13 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 18:32:13 2012] Source does appear to be extended
[Tue Jan 17 18:32:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 18:40:22 2012] XMMSAS src. selection expression = ellipse(31942.300400, 29136.828600, 308.325609, 308.325609, 0.000000, X, Y)
[Tue Jan 17 18:40:22 2012] Writing source region out to fullrun_mos2_xmm0604961301_pi300-10000_pass1_cl_src1_src.reg
[Tue Jan 17 18:40:22 2012] Extracting stamp from image fullrun_mos2_xmm0604961301_pi300-10000_cl_sm2.00.img.gz, (350, 318) - (385, 353)
[Tue Jan 17 18:40:22 2012] XMMSAS bgd. selection expression = annulus(31942.300400, 29136.828600, 513.876015, 1027.752030, X, Y)
[Tue Jan 17 18:40:22 2012] Writing fullrun_mos2_xmm0604961301_pi300-10000_pass1_cl_src1.gif
[Tue Jan 17 18:40:24 2012] Mean detx,y = (-2945.81, 3799.71) 
[Tue Jan 17 18:40:25 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 18:40:30 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 18:40:30 2012] Setting source spectrum file to fullrun_mos2_xmm0604961301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jan 17 18:40:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604961301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jan 17 18:47:03 2012] Updating aperture counts using extracted products
[Tue Jan 17 18:47:03 2012] Error reading totcts from fullrun_mos2_xmm0604961301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jan 17 18:47:03 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 18:47:03 2012] Using photon index=1.80, rate=0.0131, arf fullrun_mos2_xmm0604961301_pi300-10000_pass1_cl_src1.arf
[Tue Jan 17 18:47:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 18:47:03 2012] Updating source flux to 2e-13
[Tue Jan 17 18:47:13 2012] Reading fit data from xmm0604961301/analysis//spectral/fullrun_mos2_xmm0604961301_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jan 17 18:47:13 2012] Spectral fit parameter nH value = 1.23245e+14
[Tue Jan 17 18:47:13 2012] Spectral fit parameter PhoIndex value = 1.8849
[Tue Jan 17 18:47:13 2012] Failed to get F(0.3-8.0) from xmm0604961301/analysis//spectral/fullrun_mos2_xmm0604961301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jan 17 18:47:13 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 18:47:13 2012] Using Nh = 1.2e+14, photon index=1.88, rate=0.0131, arf fullrun_mos2_xmm0604961301_pi300-10000_pass1_cl_src1.arf
[Tue Jan 17 18:47:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 18:47:13 2012] Updating source flux to 2e-13