[Tue Jan 17 10:22:46 2012] Detection parameters:
  Position = (133.5, 221.0) = 3 33 22.81 -27 55 24.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 204.2 +/- 27.0
  Background counts = 158.9
  Rate = 0.002 +/- 0.0002

[Tue Jan 17 10:22:46 2012] Off-axis axis estimate = 13.21'
[Tue Jan 17 10:28:53 2012] Using EEF radius (= 13.04 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 10:28:53 2012] Initial guess for spatial extent in simple fitting = 13.04"
[Tue Jan 17 10:28:53 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.002
[Tue Jan 17 10:28:53 2012] Giving source the simple spatial ID 64 for pass 0, mean size = 13.04"
[Tue Jan 17 12:55:22 2012] fullrun_pn_xmm0604961201_pi300-10000_cl_pass0_src64.ximg exists
[Tue Jan 17 12:55:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604961201_pi300-10000_cl_pass0_src64.csv
[Tue Jan 17 12:55:22 2012] fullrun_pn_xmm0604961201_pi300-10000_cl_pass0_src64_1.ximg exists
[Tue Jan 17 12:55:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604961201_pi300-10000_cl_pass0_src64.csv
[Tue Jan 17 12:55:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604961201_pi300-10000_cl_pass0_src64_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604961201_pi300-10000_cl_pass0_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 12:55:23 2012] fullrun_pn_xmm0604961201_pi300-10000_cl_pass0_tfrozen_src64.ximg exists
[Tue Jan 17 12:55:23 2012] fullrun_pn_xmm0604961201_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists
[Tue Jan 17 12:55:23 2012] Fit fullrun_pn_xmm0604961201_pi300-10000_cl_pass0_tfrozen_src64 appears to have run properly
[Tue Jan 17 15:03:12 2012] Warning: source 64 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 69 at 16.640184 pixels away
[Tue Jan 17 15:03:12 2012] Source 69 is offset by -6.262544 and -7.757935 pixels which is larger than
2 X fitted extent = 1.529090 x 1.529090, not incorporating fit results
[Tue Jan 17 15:03:12 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 15:03:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 15:03:12 2012] Assessing source extent using major
[Tue Jan 17 15:03:12 2012] Source does appear to be extended
[Tue Jan 17 15:03:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 15:03:40 2012] Using EEF radius (= 13.04 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 15:03:40 2012] Initial guess for spatial extent in simple fitting = 13.04"
[Tue Jan 17 15:03:40 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.002
[Tue Jan 17 15:03:40 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 13.04"
[Tue Jan 17 17:07:59 2012] fullrun_pn_xmm0604961201_pi300-10000_cl_pass1_src59.ximg exists
[Tue Jan 17 17:07:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604961201_pi300-10000_cl_pass1_src59.csv
[Tue Jan 17 17:07:59 2012] fullrun_pn_xmm0604961201_pi300-10000_cl_pass1_src59_1.ximg exists
[Tue Jan 17 17:07:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604961201_pi300-10000_cl_pass1_src59.csv
[Tue Jan 17 17:07:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604961201_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604961201_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 17:08:00 2012] fullrun_pn_xmm0604961201_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Tue Jan 17 17:08:00 2012] fullrun_pn_xmm0604961201_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Tue Jan 17 17:08:00 2012] Fit fullrun_pn_xmm0604961201_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Tue Jan 17 18:51:27 2012] Warning: source 59 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 69 at 13.633803 pixels away
[Tue Jan 17 18:51:27 2012] Source 69 is offset by -6.262544 and -7.757935 pixels which is larger than
2 X fitted extent = 1.529090 x 1.529090, not incorporating fit results
[Tue Jan 17 18:51:27 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 18:51:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 18:51:27 2012] Assessing source extent using major
[Tue Jan 17 18:51:27 2012] Source does appear to be extended
[Tue Jan 17 18:51:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 18:51:57 2012] XMMSAS src. selection expression = ellipse(11563.404709, 19176.305618, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan 17 18:51:57 2012] Writing source region out to fullrun_pn_xmm0604961201_pi300-10000_pass1_cl_src69_src.reg
[Tue Jan 17 18:51:57 2012] Extracting stamp from image fullrun_pn_xmm0604961201_pi300-10000_cl_sm2.00.img.gz, (96, 183) - (171, 258)
[Tue Jan 17 18:51:57 2012] XMMSAS bgd. selection expression = annulus(11563.404709, 19176.305618, 1087.500000, 2175.000000, X, Y) && !ellipse(11079.293968, 18697.585251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14418.010000, 18538.268000, 1920.216055, 1920.216055, 0.000000, X, Y) && !ellipse(14030.549530, 17191.566345, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 17 18:51:57 2012] Writing fullrun_pn_xmm0604961201_pi300-10000_pass1_cl_src69.gif
[Tue Jan 17 20:30:51 2012] Mean detx,y = (-11416.99, 13496.35) 
[Tue Jan 17 20:30:56 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 20:31:17 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 20:31:17 2012] Setting source spectrum file to fullrun_pn_xmm0604961201_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Tue Jan 17 20:31:17 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604961201_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Tue Jan 17 21:50:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jan 17 21:50:26 2012] rmf not generated due to insufficient counts
[Tue Jan 17 23:24:22 2012] Updating aperture counts using extracted products
[Tue Jan 17 23:24:22 2012] Error reading totcts from fullrun_pn_xmm0604961201_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Tue Jan 17 23:24:23 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 23:24:23 2012] Using photon index=1.80, rate=0.00172, arf fullrun_pn_xmm0604961201_pi300-10000_pass1_cl_src69.arf
[Tue Jan 17 23:24:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 23:24:23 2012] Updating source flux to 1.4e-14
[Tue Jan 17 23:26:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting