[Tue Jan 17 10:22:41 2012] Detection parameters:
  Position = (269.9, 436.7) = 3 32 38.01 -27 39 45.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1429.6 +/- 48.2
  Background counts = 205.5
  Rate = 0.01 +/- 0.0004

[Tue Jan 17 10:22:46 2012] Off-axis axis estimate = 10.24'
[Tue Jan 17 10:28:53 2012] Using EEF radius (= 11.55 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 10:28:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 10:28:53 2012] Initial guess for spatial extent in simple fitting = 11.55"
[Tue Jan 17 10:28:53 2012] source mask rpix=2.7, npix_max = 39, mask sum = 35, frac = 0.879
[Tue Jan 17 10:28:53 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.55"
[Tue Jan 17 12:55:21 2012] fullrun_pn_xmm0604961201_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jan 17 12:55:21 2012] fullrun_pn_xmm0604961201_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jan 17 12:55:21 2012] Fit fullrun_pn_xmm0604961201_pi300-10000_cl_pass0_src3 appears to have run properly
[Tue Jan 17 12:55:22 2012] fullrun_pn_xmm0604961201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jan 17 12:55:22 2012] fullrun_pn_xmm0604961201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jan 17 12:55:22 2012] Fit fullrun_pn_xmm0604961201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Jan 17 15:03:12 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 14.601698 pixels away
[Tue Jan 17 15:03:12 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 15:03:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 15:03:12 2012] Assessing source extent using major
[Tue Jan 17 15:03:12 2012] Source does appear to be extended
[Tue Jan 17 15:03:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 15:03:40 2012] Using EEF radius (= 11.55 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 15:03:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 15:03:40 2012] Initial guess for spatial extent in simple fitting = 11.55"
[Tue Jan 17 15:03:40 2012] source mask rpix=2.7, npix_max = 39, mask sum = 35, frac = 0.879
[Tue Jan 17 15:03:40 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.55"
[Tue Jan 17 17:07:58 2012] fullrun_pn_xmm0604961201_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jan 17 17:07:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604961201_pi300-10000_cl_pass1_src3.csv
[Tue Jan 17 17:07:58 2012] fullrun_pn_xmm0604961201_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jan 17 17:07:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604961201_pi300-10000_cl_pass1_src3.csv
[Tue Jan 17 17:07:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604961201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604961201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 17:07:59 2012] fullrun_pn_xmm0604961201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jan 17 17:07:59 2012] fullrun_pn_xmm0604961201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jan 17 17:07:59 2012] Fit fullrun_pn_xmm0604961201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Jan 17 18:51:27 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 14.601698 pixels away
[Tue Jan 17 18:51:27 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 18:51:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 18:51:27 2012] Assessing source extent using major
[Tue Jan 17 18:51:27 2012] Source does appear to be extended
[Tue Jan 17 18:51:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 18:51:56 2012] Counts = 1429.643188, rescaling region sizes by 2.000000
[Tue Jan 17 18:51:56 2012] XMMSAS src. selection expression = ellipse(23433.447296, 37945.484314, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Jan 17 18:51:56 2012] Writing source region out to fullrun_pn_xmm0604961201_pi300-10000_pass1_cl_src3_src.reg
[Tue Jan 17 18:51:56 2012] Extracting stamp from image fullrun_pn_xmm0604961201_pi300-10000_cl_sm2.00.img.gz, (195, 362) - (345, 512)
[Tue Jan 17 18:51:56 2012] XMMSAS bgd. selection expression = annulus(23433.447296, 37945.484314, 4350.000000, 8700.000000, X, Y) && !ellipse(26371.873000, 36324.350400, 509.356015, 357.537610, 346.000200, X, Y) && !ellipse(26524.431400, 37498.290000, 1761.656051, 1761.656051, 0.000000, X, Y) && !ellipse(32487.374640, 40717.628200, 463.004013, 463.004013, 0.000000, X, Y) && !ellipse(30388.329800, 40728.266600, 1024.336029, 1024.336029, 0.000000, X, Y) && !ellipse(31425.871368, 40567.702759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29226.997345, 38237.752594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20815.097180, 34560.431600, 369.971211, 369.971211, 0.000000, X, Y) && !ellipse(25777.448600, 42882.869520, 403.101612, 403.101612, 0.000000, X, Y) && !ellipse(17960.822000, 43436.776675, 2220.576064, 2220.576064, 0.000000, X, Y) && !ellipse(29916.640000, 43562.736000, 2220.576064, 764.949622, 30.644000, X, Y) && !ellipse(22270.929443, 39692.586517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26283.963745, 35570.804871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20828.347153, 35454.485382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30016.751400, 34430.573000, 387.480011, 387.480011, 0.000000, X, Y) && !ellipse(28887.626600, 34047.706400, 877.832025, 877.832025, 0.000000, X, Y) && !ellipse(18070.241600, 33124.074000, 2076.088060, 2076.088060, 131.672000, X, Y) && !ellipse(23664.981781, 32722.006226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25528.013094, 31524.226320, 388.162411, 388.162411, 0.000000, X, Y) && !ellipse(16677.008392, 31226.701691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25582.816537, 31048.078791, 401.346565, 347.667935, 104.443477, X, Y) && !ellipse(17197.272000, 30770.660000, 323.769609, 218.236806, 89.212000, X, Y)
[Tue Jan 17 18:51:56 2012] Writing fullrun_pn_xmm0604961201_pi300-10000_pass1_cl_src3.gif
[Tue Jan 17 18:56:44 2012] Mean detx,y = (-8350.63, -8478.33) 
[Tue Jan 17 18:56:57 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 18:59:08 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 18:59:08 2012] Setting source spectrum file to fullrun_pn_xmm0604961201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jan 17 18:59:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604961201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jan 17 20:43:30 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jan 17 20:43:30 2012] rmf not generated due to insufficient counts
[Tue Jan 17 23:24:22 2012] Updating aperture counts using extracted products
[Tue Jan 17 23:24:22 2012] Error reading totcts from fullrun_pn_xmm0604961201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jan 17 23:24:22 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 23:24:22 2012] Using photon index=1.80, rate=0.012, arf fullrun_pn_xmm0604961201_pi300-10000_pass1_cl_src3.arf
[Tue Jan 17 23:24:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 23:24:22 2012] Updating source flux to 6e-14
[Tue Jan 17 23:26:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting