[Tue Jan 17 10:22:48 2012] Detection parameters:
  Position = (305.6, 424.8) = 3 32 26.31 -27 40 36.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 436.6 +/- 28.4
  Background counts = 68.7
  Rate = 0.007 +/- 0.0005

[Tue Jan 17 10:22:49 2012] Off-axis axis estimate = 9.18'
[Tue Jan 17 12:55:23 2012] Using EEF radius (= 11.02 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 12:55:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 12:55:23 2012] Initial guess for spatial extent in simple fitting = 11.02"
[Tue Jan 17 12:55:23 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.979
[Tue Jan 17 12:55:23 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.02"
[Tue Jan 17 13:49:55 2012] fullrun_mos1_xmm0604961201_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jan 17 13:49:55 2012] fullrun_mos1_xmm0604961201_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jan 17 13:49:55 2012] Fit fullrun_mos1_xmm0604961201_pi300-10000_cl_pass0_src3 appears to have run properly
[Tue Jan 17 13:49:55 2012] fullrun_mos1_xmm0604961201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jan 17 13:49:55 2012] fullrun_mos1_xmm0604961201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jan 17 13:49:55 2012] Fit fullrun_mos1_xmm0604961201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Jan 17 15:03:17 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 13.785390 pixels away
[Tue Jan 17 15:03:17 2012] Source 9 is offset by -5.864565 and 6.368139 pixels which is larger than
2 X fitted extent = 1.301131 x 1.301131, not incorporating fit results
[Tue Jan 17 15:03:17 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 15:03:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 15:03:17 2012] Assessing source extent using major
[Tue Jan 17 15:03:17 2012] Source does appear to be extended
[Tue Jan 17 15:03:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 15:03:17 2012] Source is confused with source 2
[Tue Jan 17 17:08:00 2012] Using EEF radius (= 11.02 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 17:08:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 17:08:00 2012] Initial guess for spatial extent in simple fitting = 11.02"
[Tue Jan 17 17:08:00 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.979
[Tue Jan 17 17:08:00 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.02"
[Tue Jan 17 17:48:36 2012] fullrun_mos1_xmm0604961201_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jan 17 17:48:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604961201_pi300-10000_cl_pass1_src3.csv
[Tue Jan 17 17:48:36 2012] fullrun_mos1_xmm0604961201_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jan 17 17:48:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604961201_pi300-10000_cl_pass1_src3.csv
[Tue Jan 17 17:48:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604961201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604961201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 17:48:37 2012] fullrun_mos1_xmm0604961201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jan 17 17:48:37 2012] fullrun_mos1_xmm0604961201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jan 17 17:48:37 2012] Fit fullrun_mos1_xmm0604961201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Jan 17 18:51:33 2012] Source 9 is offset by 1.775313 and 6.895148 pixels which is larger than
2 X fitted extent = 2.757632 x 2.757632, not incorporating fit results
[Tue Jan 17 18:51:33 2012] Spatial fit model total counts = 1804.220000, observed total counts = 1892.000000
[Tue Jan 17 18:51:33 2012] Offset between fit and detection position for source 9 = 7.454762 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 7.454762 pixels
  Position = (306.7, 432.2) = 3 32 25.95 -27 40 5.2
  Extent = 22.0 (21.9-44.1)", rotation angle = 0
  Source counts = 1519.1 +/- 39.0
  Background counts = 0.0
  Rate = 0.01 +/- 0.0003
[Tue Jan 17 18:51:33 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 18:51:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 18:51:33 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 18:51:33 2012] Source does appear to be extended
[Tue Jan 17 18:51:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 21:55:33 2012] Counts = 1519.100000, rescaling region sizes by 2.000000
[Tue Jan 17 21:55:33 2012] XMMSAS src. selection expression = ellipse(26637.496600, 37550.338000, 2643.984076, 2643.984076, 0.000000, X, Y)
[Tue Jan 17 21:55:33 2012] Writing source region out to fullrun_mos1_xmm0604961201_pi300-10000_pass1_cl_src9_src.reg
[Tue Jan 17 21:55:33 2012] Extracting stamp from image fullrun_mos1_xmm0604961201_pi300-10000_cl_sm2.00.img.gz, (155, 280) - (459, 584)
[Tue Jan 17 21:55:33 2012] XMMSAS bgd. selection expression = annulus(26637.496600, 37550.338000, 8813.280254, 17626.560507, X, Y) && !ellipse(26407.238800, 36316.957000, 488.373614, 413.977612, 34.374100, X, Y) && !ellipse(31236.043726, 28530.234156, 502.063050, 425.158793, 34.489379, X, Y) && !ellipse(39989.469238, 23707.284363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32500.295349, 40725.844269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25533.489520, 31542.989600, 366.984011, 366.984011, 0.000000, X, Y) && !ellipse(29272.506583, 38203.476930, 814.866322, 362.968285, 3.233154, X, Y) && !ellipse(38937.433260, 35253.423200, 349.957610, 349.957610, 0.000000, X, Y) && !ellipse(31473.324707, 40580.592926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15588.531372, 23875.992560, 645.051057, 256.120705, 74.505218, X, Y) && !ellipse(23557.069000, 22975.815600, 331.782410, 331.782410, 0.000000, X, Y) && !ellipse(20847.395660, 34573.105927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25598.467041, 31088.348114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33158.889800, 29451.046200, 432.336012, 432.336012, 0.000000, X, Y) && !ellipse(37422.824346, 20133.678175, 434.829549, 240.773967, 107.052771, X, Y) && !ellipse(29782.871800, 24402.198400, 339.327210, 339.327210, 0.000000, X, Y) && !ellipse(36338.653600, 33641.845000, 363.624810, 363.624810, 0.000000, X, Y) && !ellipse(17642.607800, 28259.983800, 356.780010, 356.780010, 0.000000, X, Y) && !ellipse(36928.249664, 21771.769333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33401.998200, 33597.224000, 1021.360029, 1021.360029, 0.000000, X, Y) && !ellipse(34760.981110, 19832.611603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32579.068100, 30336.728400, 390.192811, 390.192811, 0.000000, X, Y) && !ellipse(26264.913910, 35494.536499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30747.203400, 33866.448639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23125.880600, 30343.986000, 389.178201, 389.178201, 0.000000, X, Y) && !ellipse(12392.335388, 25895.724121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17172.253662, 30782.353333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40497.738260, 27913.823800, 572.047216, 572.047216, 0.000000, X, Y) && !ellipse(24419.939362, 38555.949890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14845.943542, 27118.731506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31095.214020, 27918.949371, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 17 21:55:33 2012] Writing fullrun_mos1_xmm0604961201_pi300-10000_pass1_cl_src9.gif
[Tue Jan 17 21:57:41 2012] Mean detx,y = (9226.87, -5385.09) 
[Tue Jan 17 21:57:44 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 22:02:24 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 22:02:24 2012] Setting source spectrum file to fullrun_mos1_xmm0604961201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue Jan 17 22:02:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604961201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Tue Jan 17 23:24:23 2012] Updating aperture counts using extracted products
[Tue Jan 17 23:24:23 2012] Error reading totcts from fullrun_mos1_xmm0604961201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue Jan 17 23:24:24 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 23:24:24 2012] Using photon index=1.80, rate=0.0129, arf fullrun_mos1_xmm0604961201_pi300-10000_pass1_cl_src9.arf
[Tue Jan 17 23:24:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 23:24:24 2012] Updating source flux to 1.9e-13
[Tue Jan 17 23:24:26 2012] Flag b found in src. 9 procflags, skipping spectral fitting
[Tue Jan 17 23:24:26 2012] Flag c found in src. 9 procflags, skipping spectral fitting