[Thu Mar 15 10:47:27 2012] Detection parameters:
  Position = (341.0, 222.2) = 3 32 17.47 -27 55 17.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.4 +/- 19.2
  Background counts = 122.7
  Rate = 0.001 +/- 0.0002

[Thu Mar 15 10:47:27 2012] Off-axis axis estimate = 6.33'
[Thu Mar 15 15:36:54 2012] Using EEF radius (= 9.59 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 15:36:54 2012] Initial guess for spatial extent in simple fitting = 9.59"
[Thu Mar 15 15:36:54 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.025
[Thu Mar 15 15:36:54 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 9.59"
[Thu Mar 15 16:38:46 2012] fullrun_mos2_xmm0604961101_pi300-10000_cl_pass0_src26.ximg exists
[Thu Mar 15 16:38:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604961101_pi300-10000_cl_pass0_src26.csv
[Thu Mar 15 16:38:46 2012] fullrun_mos2_xmm0604961101_pi300-10000_cl_pass0_src26_1.ximg exists
[Thu Mar 15 16:38:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604961101_pi300-10000_cl_pass0_src26.csv
[Thu Mar 15 16:38:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604961101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604961101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 16:38:46 2012] fullrun_mos2_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Thu Mar 15 16:38:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Thu Mar 15 16:38:46 2012] fullrun_mos2_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Thu Mar 15 16:38:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Thu Mar 15 16:38:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 16:39:19 2012] Warning, spatial fit 26 centroid is now closest to src. 33
[Thu Mar 15 16:39:19 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 16:39:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 16:39:19 2012] Assessing source extent using major
[Thu Mar 15 16:39:19 2012] Source does appear to be extended
[Thu Mar 15 16:39:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 19:15:16 2012] Using EEF radius (= 9.59 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 19:15:16 2012] Initial guess for spatial extent in simple fitting = 9.59"
[Thu Mar 15 19:15:16 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.025
[Thu Mar 15 19:15:16 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 9.59"
[Thu Mar 15 20:12:51 2012] fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_src25.ximg exists
[Thu Mar 15 20:12:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_src25.csv
[Thu Mar 15 20:12:51 2012] fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_src25_1.ximg exists
[Thu Mar 15 20:12:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_src25.csv
[Thu Mar 15 20:12:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 20:12:51 2012] fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Thu Mar 15 20:12:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Thu Mar 15 20:12:51 2012] fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Thu Mar 15 20:12:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Thu Mar 15 20:12:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 20:13:14 2012] Spatial fit model total counts = 572.202000, observed total counts = 476.000000
[Thu Mar 15 20:13:14 2012] Poor agreement between spatial fit and data for source 32
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar 15 20:13:14 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 20:13:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 20:13:14 2012] Assessing source extent using major
[Thu Mar 15 20:13:14 2012] Source does appear to be extended
[Thu Mar 15 20:13:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 22:47:32 2012] XMMSAS src. selection expression = ellipse(29621.301056, 19286.979187, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Mar 15 22:47:32 2012] Writing source region out to fullrun_mos2_xmm0604961101_pi300-10000_pass1_cl_src32_src.reg
[Thu Mar 15 22:47:32 2012] Extracting stamp from image fullrun_mos2_xmm0604961101_pi300-10000_cl_sm2.00.img.gz, (304, 185) - (379, 260)
[Thu Mar 15 22:47:32 2012] XMMSAS bgd. selection expression = annulus(29621.301056, 19286.979187, 1087.500000, 2175.000000, X, Y) && !ellipse(31179.628000, 19759.860000, 1585.112046, 1585.112046, 0.000000, X, Y)
[Thu Mar 15 22:47:32 2012] Writing fullrun_mos2_xmm0604961101_pi300-10000_pass1_cl_src32.gif
[Thu Mar 15 22:54:59 2012] Mean detx,y = (-4921.00, -6066.14) 
[Thu Mar 15 22:55:01 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 15 22:55:17 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 15 22:55:17 2012] Setting source spectrum file to fullrun_mos2_xmm0604961101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Thu Mar 15 22:55:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604961101_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Thu Mar 15 23:33:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Mar 15 23:33:19 2012] rmf not generated due to insufficient counts
[Thu Mar 15 23:46:34 2012] Updating aperture counts using extracted products
[Thu Mar 15 23:46:34 2012] Error reading totcts from fullrun_mos2_xmm0604961101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Thu Mar 15 23:46:35 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 15 23:46:35 2012] Using photon index=1.80, rate=0.00113, arf fullrun_mos2_xmm0604961101_pi300-10000_pass1_cl_src32.arf
[Thu Mar 15 23:46:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 15 23:46:35 2012] Updating source flux to 1.5e-14
[Thu Mar 15 23:46:51 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting