[Thu Mar 15 10:47:25 2012] Detection parameters:
  Position = (303.8, 358.3) = 3 32 29.71 -27 45 26.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 160.9 +/- 22.1
  Background counts = 138.8
  Rate = 0.002 +/- 0.0002

[Thu Mar 15 10:47:27 2012] Off-axis axis estimate = 4.36'
[Thu Mar 15 15:36:54 2012] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 15:36:54 2012] Initial guess for spatial extent in simple fitting = 8.61"
[Thu Mar 15 15:36:54 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.017
[Thu Mar 15 15:36:54 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 8.61"
[Thu Mar 15 16:38:46 2012] fullrun_mos2_xmm0604961101_pi300-10000_cl_pass0_src22.ximg exists
[Thu Mar 15 16:38:46 2012] fullrun_mos2_xmm0604961101_pi300-10000_cl_pass0_src22_1.ximg exists
[Thu Mar 15 16:38:46 2012] Fit fullrun_mos2_xmm0604961101_pi300-10000_cl_pass0_src22 appears to have run properly
[Thu Mar 15 16:38:46 2012] fullrun_mos2_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Thu Mar 15 16:38:46 2012] fullrun_mos2_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Thu Mar 15 16:38:46 2012] Fit fullrun_mos2_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Thu Mar 15 16:39:19 2012] Source 18 is offset by 0.421441 and -2.539388 pixels which is larger than
2 X fitted extent = 8.096552 x 2.395522, not incorporating fit results
[Thu Mar 15 16:39:19 2012] Spatial fit model total counts = 808.999000, observed total counts = 809.000000
[Thu Mar 15 16:39:19 2012] Offset between fit and detection position for source 18 = 0.115408 pixels
[Thu Mar 15 16:39:19 2012] 805.002000 total counts/ 715.568000 bgd. counts: snr = 3.343314
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.115408 pixels
  Position = (303.7, 358.3) = 3 32 29.74 -27 45 26.7
  Extent = 4.5 (3.7-5.8)", rotation angle = 0
  Source counts = 89.4 +/- 28.4
  Background counts = 715.6
  Rate = 0.0008 +/- 0.0003
[Thu Mar 15 16:39:19 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 16:39:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 16:39:19 2012] Assessing source extent using major axis lower bound
[Thu Mar 15 16:39:19 2012] Source does appear to be extended
[Thu Mar 15 16:39:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 16:39:19 2012] Source is confused with source 16
[Thu Mar 15 19:15:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 15 19:15:16 2012] Initial guess for spatial extent in simple fitting = 4.52"
[Thu Mar 15 19:15:16 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.949
[Thu Mar 15 19:15:16 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 4.52"
[Thu Mar 15 20:12:51 2012] fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_src21.ximg exists
[Thu Mar 15 20:12:51 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_src21.csv
[Thu Mar 15 20:12:51 2012] fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_src21_1.ximg exists
[Thu Mar 15 20:12:51 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_src21.csv
[Thu Mar 15 20:12:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 20:12:51 2012] fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Thu Mar 15 20:12:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Thu Mar 15 20:12:51 2012] fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Thu Mar 15 20:12:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Thu Mar 15 20:12:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 20:13:14 2012] Warning, spatial fit 21 centroid is now closest to src. 36
[Thu Mar 15 20:13:14 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 20:13:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 20:13:14 2012] Assessing source extent using major axis lower bound
[Thu Mar 15 20:13:14 2012] Source does appear to be extended
[Thu Mar 15 20:13:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 22:47:32 2012] XMMSAS src. selection expression = ellipse(26369.139800, 31121.990600, 271.338008, 271.338008, 0.000000, X, Y)
[Thu Mar 15 22:47:32 2012] Writing source region out to fullrun_mos2_xmm0604961101_pi300-10000_pass1_cl_src18_src.reg
[Thu Mar 15 22:47:32 2012] Extracting stamp from image fullrun_mos2_xmm0604961101_pi300-10000_cl_sm2.00.img.gz, (288, 343) - (319, 374)
[Thu Mar 15 22:47:32 2012] XMMSAS bgd. selection expression = annulus(26369.139800, 31121.990600, 452.230013, 904.460026, X, Y) && !ellipse(26290.312555, 31607.356298, 518.587186, 283.473659, 34.158233, X, Y)
[Thu Mar 15 22:47:32 2012] Writing fullrun_mos2_xmm0604961101_pi300-10000_pass1_cl_src18.gif
[Thu Mar 15 22:54:00 2012] Mean detx,y = (2943.31, 3290.02) 
[Thu Mar 15 22:54:01 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 15 22:54:09 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 15 22:54:09 2012] Setting source spectrum file to fullrun_mos2_xmm0604961101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Mar 15 22:54:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604961101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Thu Mar 15 23:29:00 2012] Not generating rmf since there are only 89 counts
[Thu Mar 15 23:29:00 2012] rmf not generated due to insufficient counts
[Thu Mar 15 23:46:34 2012] Updating aperture counts using extracted products
[Thu Mar 15 23:46:34 2012] Error reading totcts from fullrun_mos2_xmm0604961101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Mar 15 23:46:35 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 15 23:46:35 2012] Using photon index=1.80, rate=0.000806, arf fullrun_mos2_xmm0604961101_pi300-10000_pass1_cl_src18.arf
[Thu Mar 15 23:46:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 15 23:46:35 2012] Updating source flux to 1.3e-14
[Thu Mar 15 23:46:51 2012] Flag b found in src. 18 procflags, skipping spectral fitting
[Thu Mar 15 23:46:51 2012] Flag c found in src. 18 procflags, skipping spectral fitting
[Thu Mar 15 23:46:51 2012] Source 18 has fewer than 100.000000 counts, skipping spectral fitting