[Thu Mar 15 10:47:24 2012] Detection parameters:
  Position = (368.5, 329.1) = 3 32 8.47 -27 47 33.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1492.3 +/- 49.5
  Background counts = 144.0
  Rate = 0.02 +/- 0.0005

[Thu Mar 15 10:47:27 2012] Off-axis axis estimate = 5.55'
[Thu Mar 15 15:36:54 2012] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 15:36:54 2012] Initial guess for spatial extent in simple fitting = 9.20"
[Thu Mar 15 15:36:54 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.096
[Thu Mar 15 15:36:54 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.20"
[Thu Mar 15 16:38:46 2012] fullrun_mos2_xmm0604961101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Mar 15 16:38:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604961101_pi300-10000_cl_pass0_src1.csv
[Thu Mar 15 16:38:46 2012] fullrun_mos2_xmm0604961101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Mar 15 16:38:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604961101_pi300-10000_cl_pass0_src1.csv
[Thu Mar 15 16:38:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604961101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604961101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 16:38:46 2012] fullrun_mos2_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Mar 15 16:38:46 2012] fullrun_mos2_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Mar 15 16:38:46 2012] Fit fullrun_mos2_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Mar 15 16:39:19 2012] Spatial fit model total counts = 1925.990000, observed total counts = 1901.000000
[Thu Mar 15 16:39:19 2012] Offset between fit and detection position for source 1 = 0.191753 pixels
[Thu Mar 15 16:39:19 2012] 1923.985000 total counts/ 986.118000 bgd. counts: snr = 29.865983
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.191753 pixels
  Position = (368.4, 329.0) = 3 32 8.53 -27 47 33.7
  Extent = 4.7 (4.5-5.0)", rotation angle = 0
  Source counts = 937.9 +/- 43.9
  Background counts = 986.1
  Rate = 0.008 +/- 0.0004
[Thu Mar 15 16:39:19 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 16:39:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 16:39:19 2012] Assessing source extent using major axis lower bound
[Thu Mar 15 16:39:19 2012] Source does appear to be extended
[Thu Mar 15 16:39:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 19:15:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 15 19:15:16 2012] Initial guess for spatial extent in simple fitting = 4.71"
[Thu Mar 15 19:15:16 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.198
[Thu Mar 15 19:15:16 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.71"
[Thu Mar 15 20:12:51 2012] fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Mar 15 20:12:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_src1.csv
[Thu Mar 15 20:12:51 2012] fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Mar 15 20:12:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_src1.csv
[Thu Mar 15 20:12:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 20:12:51 2012] fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Mar 15 20:12:51 2012] fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Mar 15 20:12:51 2012] Fit fullrun_mos2_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Mar 15 20:13:14 2012] Spatial fit model total counts = 1836.520000, observed total counts = 1812.000000
[Thu Mar 15 20:13:14 2012] Offset between fit and detection position for source 1 = 0.005324 pixels
[Thu Mar 15 20:13:14 2012] 1837.016000 total counts/ 907.731000 bgd. counts: snr = 30.843975
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.005324 pixels
  Position = (368.4, 329.1) = 3 32 8.53 -27 47 33.7
  Extent = 4.7 (4.4-5.0)", rotation angle = 0
  Source counts = 929.3 +/- 42.9
  Background counts = 907.7
  Rate = 0.008 +/- 0.0004
[Thu Mar 15 20:13:14 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 20:13:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 20:13:14 2012] Assessing source extent using major axis lower bound
[Thu Mar 15 20:13:14 2012] Source does appear to be extended
[Thu Mar 15 20:13:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 22:47:32 2012] XMMSAS src. selection expression = ellipse(31998.037600, 28579.048400, 280.024208, 280.024208, 0.000000, X, Y)
[Thu Mar 15 22:47:32 2012] Writing source region out to fullrun_mos2_xmm0604961101_pi300-10000_pass1_cl_src1_src.reg
[Thu Mar 15 22:47:32 2012] Extracting stamp from image fullrun_mos2_xmm0604961101_pi300-10000_cl_sm2.00.img.gz, (352, 313) - (384, 345)
[Thu Mar 15 22:47:32 2012] XMMSAS bgd. selection expression = annulus(31998.037600, 28579.048400, 466.707013, 933.414027, X, Y)
[Thu Mar 15 22:47:32 2012] Writing fullrun_mos2_xmm0604961101_pi300-10000_pass1_cl_src1.gif
[Thu Mar 15 22:47:38 2012] Mean detx,y = (-3234.91, 3321.14) 
[Thu Mar 15 22:47:39 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 15 22:47:47 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 15 22:47:47 2012] Setting source spectrum file to fullrun_mos2_xmm0604961101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 15 22:47:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604961101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Mar 15 23:46:34 2012] Updating aperture counts using extracted products
[Thu Mar 15 23:46:34 2012] Error reading totcts from fullrun_mos2_xmm0604961101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 15 23:46:35 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 15 23:46:35 2012] Using photon index=1.80, rate=0.00838, arf fullrun_mos2_xmm0604961101_pi300-10000_pass1_cl_src1.arf
[Thu Mar 15 23:46:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 15 23:46:35 2012] Updating source flux to 1.3e-13
[Thu Mar 15 23:48:14 2012] Reading fit data from xmm0604961101/analysis//spectral/fullrun_mos2_xmm0604961101_pi300-10000_pass1_cl_src1_pl.csv
[Thu Mar 15 23:48:14 2012] Spectral fit parameter nH value = 5.5112e+20
[Thu Mar 15 23:48:14 2012] Spectral fit parameter PhoIndex value = 1.99407
[Thu Mar 15 23:48:14 2012] Failed to get F(0.3-8.0) from xmm0604961101/analysis//spectral/fullrun_mos2_xmm0604961101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Mar 15 23:48:14 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 15 23:48:14 2012] Using Nh = 5.5e+20, photon index=1.99, rate=0.00838, arf fullrun_mos2_xmm0604961101_pi300-10000_pass1_cl_src1.arf
[Thu Mar 15 23:48:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 15 23:48:14 2012] Updating source flux to 1.2e-13