[Thu Mar 15 10:47:22 2012] Detection parameters:
  Position = (127.1, 298.1) = 3 33 27.63 -27 49 48.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.3 +/- 18.3
  Background counts = 75.3
  Rate = 0.0007 +/- 0.0002

[Thu Mar 15 10:47:22 2012] Off-axis axis estimate = 12.42'
[Thu Mar 15 13:42:26 2012] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 13:42:26 2012] Initial guess for spatial extent in simple fitting = 12.64"
[Thu Mar 15 13:42:26 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.905
[Thu Mar 15 13:42:26 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 12.64"
[Thu Mar 15 15:36:53 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src32.ximg exists
[Thu Mar 15 15:36:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src32.csv
[Thu Mar 15 15:36:53 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src32_1.ximg exists
[Thu Mar 15 15:36:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src32.csv
[Thu Mar 15 15:36:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 15:36:54 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Thu Mar 15 15:36:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src32.csv
[Thu Mar 15 15:36:54 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Thu Mar 15 15:36:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src32.csv
[Thu Mar 15 15:36:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 16:39:10 2012] Warning, spatial fit 32 centroid is now closest to src. 35
[Thu Mar 15 16:39:11 2012] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 10.026435 pixels away
[Thu Mar 15 16:39:11 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 16:39:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 16:39:11 2012] Assessing source extent using major
[Thu Mar 15 16:39:11 2012] Source does appear to be extended
[Thu Mar 15 16:39:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 16:39:11 2012] Source is confused with source 35
[Thu Mar 15 16:39:11 2012] Source is confused with source 33
[Thu Mar 15 17:59:06 2012] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 17:59:06 2012] Initial guess for spatial extent in simple fitting = 12.64"
[Thu Mar 15 17:59:06 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.905
[Thu Mar 15 17:59:06 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 12.64"
[Thu Mar 15 19:15:15 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_src30.ximg exists
[Thu Mar 15 19:15:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_src30.csv
[Thu Mar 15 19:15:15 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_src30_1.ximg exists
[Thu Mar 15 19:15:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_src30.csv
[Thu Mar 15 19:15:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 19:15:16 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Thu Mar 15 19:15:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src30.csv
[Thu Mar 15 19:15:16 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Thu Mar 15 19:15:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src30.csv
[Thu Mar 15 19:15:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 20:13:08 2012] Warning, spatial fit 30 centroid is now closest to src. 35
[Thu Mar 15 20:13:08 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 20:13:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 20:13:08 2012] Assessing source extent using major
[Thu Mar 15 20:13:08 2012] Source does appear to be extended
[Thu Mar 15 20:13:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 22:21:49 2012] XMMSAS src. selection expression = ellipse(11009.237701, 25882.764923, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Mar 15 22:21:49 2012] Writing source region out to fullrun_mos1_xmm0604961101_pi300-10000_pass1_cl_src34_src.reg
[Thu Mar 15 22:21:49 2012] Extracting stamp from image fullrun_mos1_xmm0604961101_pi300-10000_cl_sm2.00.img.gz, (90, 261) - (165, 336)
[Thu Mar 15 22:21:49 2012] XMMSAS bgd. selection expression = annulus(11009.237701, 25882.764923, 1087.500000, 2175.000000, X, Y) && !ellipse(10659.723671, 28484.685669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12855.271600, 28193.462400, 363.637610, 363.637610, 0.000000, X, Y) && !ellipse(11064.198135, 25333.805756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10987.747231, 26495.986420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11181.760178, 27381.467896, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 15 22:21:49 2012] Writing fullrun_mos1_xmm0604961101_pi300-10000_pass1_cl_src34.gif
[Thu Mar 15 22:32:49 2012] Mean detx,y = (-7567.42, -14922.21) 
[Thu Mar 15 22:32:50 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 15 22:33:05 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 15 22:33:05 2012] Setting source spectrum file to fullrun_mos1_xmm0604961101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Thu Mar 15 22:33:05 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604961101_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Thu Mar 15 22:46:18 2012] Not generating rmf since there are only 87 counts
[Thu Mar 15 22:46:18 2012] rmf not generated due to insufficient counts
[Thu Mar 15 23:46:33 2012] Updating aperture counts using extracted products
[Thu Mar 15 23:46:33 2012] Error reading totcts from fullrun_mos1_xmm0604961101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Thu Mar 15 23:46:34 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 15 23:46:34 2012] Using photon index=1.80, rate=0.000725, arf fullrun_mos1_xmm0604961101_pi300-10000_pass1_cl_src34.arf
[Thu Mar 15 23:46:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 15 23:46:34 2012] Updating source flux to 2.5e-14
[Thu Mar 15 23:46:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting