[Thu Mar 15 10:47:21 2012] Detection parameters:
  Position = (124.9, 316.8) = 3 33 28.35 -27 48 26.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.8 +/- 16.8
  Background counts = 63.5
  Rate = 0.0009 +/- 0.0001

[Thu Mar 15 10:47:22 2012] Off-axis axis estimate = 12.65'
[Thu Mar 15 13:42:26 2012] Using EEF radius (= 12.76 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 13:42:26 2012] Initial guess for spatial extent in simple fitting = 12.76"
[Thu Mar 15 13:42:26 2012] source mask rpix=2.9, npix_max = 47, mask sum = 48, frac = 1.019
[Thu Mar 15 13:42:26 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 12.76"
[Thu Mar 15 15:36:53 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src28.ximg exists
[Thu Mar 15 15:36:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src28.csv
[Thu Mar 15 15:36:53 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src28_1.ximg exists
[Thu Mar 15 15:36:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src28.csv
[Thu Mar 15 15:36:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 15:36:54 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Thu Mar 15 15:36:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Thu Mar 15 15:36:54 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Thu Mar 15 15:36:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Thu Mar 15 15:36:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 16:39:10 2012] Warning, spatial fit 28 centroid is now closest to src. 27
[Thu Mar 15 16:39:11 2012] Spatial fit model total counts = 537.764000, observed total counts = 527.000000
[Thu Mar 15 16:39:11 2012] Offset between fit and detection position for source 31 = 0.780420 pixels
[Thu Mar 15 16:39:11 2012] Warning, changing simple spatial fit ID from 28 to 38
[Thu Mar 15 16:39:11 2012] 511.691490 total counts/ 502.902000 bgd. counts: snr = 0.391942
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.780420 pixels
  Position = (124.3, 317.4) = 3 33 28.53 -27 48 23.9
  Extent = 3.1" x 3.1", rotation angle = 0
  Source counts = 8.8 +/- 22.6
  Background counts = 502.9
  Rate = 8e-05 +/- 0.0002
  Deleting source due to low Poisson probability