[Thu Mar 15 10:47:18 2012] Detection parameters:
  Position = (278.6, 437.1) = 3 32 37.93 -27 39 42.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 513.2 +/- 32.0
  Background counts = 129.3
  Rate = 0.004 +/- 0.0003

[Thu Mar 15 10:47:22 2012] Off-axis axis estimate = 10.15'
[Thu Mar 15 13:42:26 2012] Using EEF radius (= 11.50 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 13:42:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 15 13:42:26 2012] Initial guess for spatial extent in simple fitting = 11.50"
[Thu Mar 15 13:42:26 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.062
[Thu Mar 15 13:42:26 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 11.50"
[Thu Mar 15 15:36:53 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src4.ximg exists
[Thu Mar 15 15:36:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src4.csv
[Thu Mar 15 15:36:53 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Mar 15 15:36:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src4.csv
[Thu Mar 15 15:36:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 15:36:53 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Mar 15 15:36:53 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Mar 15 15:36:53 2012] Fit fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Mar 15 16:39:10 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.856947 pixels away
[Thu Mar 15 16:39:11 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 16:39:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 16:39:11 2012] Assessing source extent using major
[Thu Mar 15 16:39:11 2012] Source does appear to be extended
[Thu Mar 15 16:39:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 17:59:06 2012] Using EEF radius (= 11.50 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 17:59:06 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 15 17:59:06 2012] Initial guess for spatial extent in simple fitting = 11.50"
[Thu Mar 15 17:59:06 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.062
[Thu Mar 15 17:59:06 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 11.50"
[Thu Mar 15 19:15:15 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_src4.ximg exists
[Thu Mar 15 19:15:15 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Mar 15 19:15:15 2012] Fit fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_src4 appears to have run properly
[Thu Mar 15 19:15:15 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Mar 15 19:15:15 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Mar 15 19:15:15 2012] Fit fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Mar 15 20:13:08 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.856947 pixels away
[Thu Mar 15 20:13:08 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 20:13:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 20:13:08 2012] Assessing source extent using major
[Thu Mar 15 20:13:08 2012] Source does appear to be extended
[Thu Mar 15 20:13:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 22:21:49 2012] XMMSAS src. selection expression = ellipse(24192.299805, 37976.221588, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Mar 15 22:21:49 2012] Writing source region out to fullrun_mos1_xmm0604961101_pi300-10000_pass1_cl_src3_src.reg
[Thu Mar 15 22:21:49 2012] Extracting stamp from image fullrun_mos1_xmm0604961101_pi300-10000_cl_sm2.00.img.gz, (241, 400) - (316, 475)
[Thu Mar 15 22:21:49 2012] XMMSAS bgd. selection expression = annulus(24192.299805, 37976.221588, 1087.500000, 2175.000000, X, Y)
[Thu Mar 15 22:21:49 2012] Writing fullrun_mos1_xmm0604961101_pi300-10000_pass1_cl_src3.gif
[Thu Mar 15 22:24:52 2012] Mean detx,y = (8880.38, -7889.36) 
[Thu Mar 15 22:24:54 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 15 22:25:06 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 15 22:25:06 2012] Setting source spectrum file to fullrun_mos1_xmm0604961101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Mar 15 22:25:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604961101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Mar 15 22:39:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Mar 15 22:39:46 2012] rmf not generated due to insufficient counts
[Thu Mar 15 23:46:33 2012] Updating aperture counts using extracted products
[Thu Mar 15 23:46:33 2012] Error reading totcts from fullrun_mos1_xmm0604961101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Mar 15 23:46:33 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 15 23:46:33 2012] Using photon index=1.80, rate=0.00426, arf fullrun_mos1_xmm0604961101_pi300-10000_pass1_cl_src3.arf
[Thu Mar 15 23:46:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 15 23:46:33 2012] Updating source flux to 8.7e-14
[Thu Mar 15 23:46:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting