[Thu Mar 15 10:47:20 2012] Detection parameters:
  Position = (130.0, 329.9) = 3 33 26.66 -27 47 22.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.2 +/- 17.4
  Background counts = 68.2
  Rate = 0.0007 +/- 0.0001

[Thu Mar 15 10:47:22 2012] Off-axis axis estimate = 12.42'
[Thu Mar 15 13:42:26 2012] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 13:42:26 2012] Initial guess for spatial extent in simple fitting = 12.64"
[Thu Mar 15 13:42:26 2012] source mask rpix=2.9, npix_max = 46, mask sum = 36, frac = 0.776
[Thu Mar 15 13:42:26 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 12.64"
[Thu Mar 15 15:36:53 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src33.ximg exists
[Thu Mar 15 15:36:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src33.csv
[Thu Mar 15 15:36:53 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src33_1.ximg exists
[Thu Mar 15 15:36:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src33.csv
[Thu Mar 15 15:36:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 15:36:54 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Thu Mar 15 15:36:54 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Thu Mar 15 15:36:54 2012] Fit fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Thu Mar 15 16:39:10 2012] Spatial fit model total counts = 696.564000, observed total counts = 339.000000
[Thu Mar 15 16:39:10 2012] Poor agreement between spatial fit and data for source 24
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar 15 16:39:10 2012] Source 24 is offset by -7.864456 and -4.192963 pixels which is larger than
2 X fitted extent = 1.482506 x 1.482506, not incorporating fit results
[Thu Mar 15 16:39:10 2012] Warning, spatial fit 33 centroid is now closest to src. 20
[Thu Mar 15 16:39:11 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 16:39:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 16:39:11 2012] Assessing source extent using major
[Thu Mar 15 16:39:11 2012] Source does appear to be extended
[Thu Mar 15 16:39:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 16:39:11 2012] Source is confused with source 27
[Thu Mar 15 17:59:06 2012] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 17:59:06 2012] Initial guess for spatial extent in simple fitting = 12.64"
[Thu Mar 15 17:59:06 2012] source mask rpix=2.9, npix_max = 46, mask sum = 36, frac = 0.776
[Thu Mar 15 17:59:06 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 12.64"
[Thu Mar 15 19:15:15 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_src31.ximg exists
[Thu Mar 15 19:15:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_src31.csv
[Thu Mar 15 19:15:15 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_src31_1.ximg exists
[Thu Mar 15 19:15:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_src31.csv
[Thu Mar 15 19:15:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 19:15:16 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Thu Mar 15 19:15:16 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Thu Mar 15 19:15:16 2012] Fit fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Thu Mar 15 20:13:08 2012] Source 24 is offset by -7.864456 and -4.192963 pixels which is larger than
2 X fitted extent = 1.482506 x 1.482506, not incorporating fit results
[Thu Mar 15 20:13:08 2012] Spatial fit model total counts = 469.926000, observed total counts = 464.000000
[Thu Mar 15 20:13:08 2012] Offset between fit and detection position for source 24 = 0.609203 pixels
[Thu Mar 15 20:13:08 2012] 404.473400 total counts/ 378.901000 bgd. counts: snr = 1.313738
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.609203 pixels
  Position = (129.5, 329.6) = 3 33 26.83 -27 47 30.7
  Extent = 7.3 (3.2-18.5)", rotation angle = 0
  Source counts = 25.6 +/- 20.1
  Background counts = 378.9
  Rate = 0.0002 +/- 0.0002
  Deleting source due to low Poisson probability