[Thu Mar 15 10:47:19 2012] Detection parameters:
  Position = (126.2, 345.2) = 3 33 27.90 -27 46 21.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.7 +/- 18.0
  Background counts = 63.8
  Rate = 0.0008 +/- 0.0001

[Thu Mar 15 10:47:22 2012] Off-axis axis estimate = 12.94'
[Thu Mar 15 13:42:26 2012] Using EEF radius (= 12.90 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 13:42:26 2012] Initial guess for spatial extent in simple fitting = 12.90"
[Thu Mar 15 13:42:26 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.020
[Thu Mar 15 13:42:26 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 12.90"
[Thu Mar 15 15:36:53 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src30.ximg exists
[Thu Mar 15 15:36:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src30.csv
[Thu Mar 15 15:36:53 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src30_1.ximg exists
[Thu Mar 15 15:36:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src30.csv
[Thu Mar 15 15:36:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 15:36:54 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Thu Mar 15 15:36:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src30.csv
[Thu Mar 15 15:36:54 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Thu Mar 15 15:36:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src30.csv
[Thu Mar 15 15:36:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604961101_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 16:39:10 2012] Warning, spatial fit 30 centroid is now closest to src. 24
[Thu Mar 15 16:39:10 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 15.227259 pixels away
[Thu Mar 15 16:39:11 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 16:39:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 16:39:11 2012] Assessing source extent using major
[Thu Mar 15 16:39:11 2012] Source does appear to be extended
[Thu Mar 15 16:39:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 17:59:06 2012] Using EEF radius (= 12.90 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 17:59:06 2012] Initial guess for spatial extent in simple fitting = 12.90"
[Thu Mar 15 17:59:06 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.020
[Thu Mar 15 17:59:06 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 12.90"
[Thu Mar 15 19:15:15 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_src29.ximg exists
[Thu Mar 15 19:15:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_src29.csv
[Thu Mar 15 19:15:15 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_src29_1.ximg exists
[Thu Mar 15 19:15:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_src29.csv
[Thu Mar 15 19:15:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 19:15:16 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Thu Mar 15 19:15:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src29.csv
[Thu Mar 15 19:15:16 2012] fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Thu Mar 15 19:15:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src29.csv
[Thu Mar 15 19:15:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604961101_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 20:13:08 2012] Source 20 is offset by -1.366117 and -4.382444 pixels which is larger than
2 X fitted extent = 1.071844 x 1.071844, not incorporating fit results
[Thu Mar 15 20:13:08 2012] Source 20 is offset by -8.130140 and 4.853533 pixels which is larger than
2 X fitted extent = 1.479844 x 1.479844, not incorporating fit results
[Thu Mar 15 20:13:08 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 15.511107 pixels away
[Thu Mar 15 20:13:08 2012] Warning, spatial fit 29 centroid is now closest to src. 24
[Thu Mar 15 20:13:08 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 20:13:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 20:13:08 2012] Assessing source extent using major
[Thu Mar 15 20:13:08 2012] Source does appear to be extended
[Thu Mar 15 20:13:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 22:21:49 2012] XMMSAS src. selection expression = ellipse(10931.649780, 29983.229340, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Mar 15 22:21:49 2012] Writing source region out to fullrun_mos1_xmm0604961101_pi300-10000_pass1_cl_src20_src.reg
[Thu Mar 15 22:21:49 2012] Extracting stamp from image fullrun_mos1_xmm0604961101_pi300-10000_cl_sm2.00.img.gz, (89, 308) - (164, 383)
[Thu Mar 15 22:21:49 2012] XMMSAS bgd. selection expression = annulus(10931.649780, 29983.229340, 1087.500000, 2175.000000, X, Y) && !ellipse(10316.036766, 29612.542114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10659.723671, 28484.685669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12855.271600, 28193.462400, 363.637610, 363.637610, 0.000000, X, Y) && !ellipse(11197.131470, 31436.512726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10076.206642, 29014.087891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11181.760178, 27381.467896, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 15 22:21:49 2012] Writing fullrun_mos1_xmm0604961101_pi300-10000_pass1_cl_src20.gif
[Thu Mar 15 22:32:30 2012] Mean detx,y = (-3859.30, -16669.50) 
[Thu Mar 15 22:32:31 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 15 22:32:43 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 15 22:32:44 2012] Setting source spectrum file to fullrun_mos1_xmm0604961101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Mar 15 22:32:44 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604961101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Thu Mar 15 22:46:10 2012] Not generating rmf since there are only 91 counts
[Thu Mar 15 22:46:10 2012] rmf not generated due to insufficient counts
[Thu Mar 15 23:46:33 2012] Updating aperture counts using extracted products
[Thu Mar 15 23:46:33 2012] Error reading totcts from fullrun_mos1_xmm0604961101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Mar 15 23:46:34 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 15 23:46:34 2012] Using photon index=1.80, rate=0.000761, arf fullrun_mos1_xmm0604961101_pi300-10000_pass1_cl_src20.arf
[Thu Mar 15 23:46:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 15 23:46:34 2012] Updating source flux to 2.7e-14
[Thu Mar 15 23:46:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting