[Tue Jan 17 10:59:01 2012] Detection parameters:
  Position = (352.5, 491.7) = 3 32 11.56 -27 37 24.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 834.1 +/- 40.6
  Background counts = 194.4
  Rate = 0.007 +/- 0.0003

[Tue Jan 17 10:59:04 2012] Off-axis axis estimate = 14.55'
[Tue Jan 17 11:06:00 2012] Using EEF radius (= 13.70 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 11:06:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 11:06:00 2012] Initial guess for spatial extent in simple fitting = 13.70"
[Tue Jan 17 11:06:00 2012] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.919
[Tue Jan 17 11:06:00 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 13.70"
[Tue Jan 17 12:43:40 2012] fullrun_pn_xmm0604960901_pi300-10000_cl_pass0_src4.ximg exists
[Tue Jan 17 12:43:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960901_pi300-10000_cl_pass0_src4.csv
[Tue Jan 17 12:43:40 2012] fullrun_pn_xmm0604960901_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Jan 17 12:43:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960901_pi300-10000_cl_pass0_src4.csv
[Tue Jan 17 12:43:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604960901_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604960901_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 12:43:41 2012] fullrun_pn_xmm0604960901_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Jan 17 12:43:41 2012] fullrun_pn_xmm0604960901_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Jan 17 12:43:41 2012] Fit fullrun_pn_xmm0604960901_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Tue Jan 17 14:08:42 2012] Warning, spatial fit 4 centroid is now closest to src. 6
[Tue Jan 17 14:08:42 2012] Spatial fit model total counts = 1704.560000, observed total counts = 1716.000000
[Tue Jan 17 14:08:42 2012] Offset between fit and detection position for source 4 = 1.270241 pixels
[Tue Jan 17 14:08:42 2012] Warning, changing simple spatial fit ID from 4 to 5
[Tue Jan 17 14:08:42 2012] 1633.946300 total counts/ 25.626300 bgd. counts: snr = 317.708994
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.270241 pixels
  Position = (353.8, 491.5) = 3 32 11.16 -27 37 26.6
  Extent = 27.8" x 21.2", rotation angle = 226
  Source counts = 1608.3 +/- 40.4
  Background counts = 25.6
  Rate = 0.02 +/- 0.0005
[Tue Jan 17 14:08:42 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 14:08:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 14:08:42 2012] Assessing source extent using major
[Tue Jan 17 14:08:42 2012] Source does appear to be extended
[Tue Jan 17 14:08:42 2012] Computing asymmetry using major and minor axis, asym = 1.31
[Tue Jan 17 14:08:42 2012] Source is confused with source 5
[Tue Jan 17 14:09:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 14:09:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 14:09:02 2012] Initial guess for spatial extent in simple fitting = 24.48"
[Tue Jan 17 14:09:02 2012] source mask rpix=5.6, npix_max = 150, mask sum = 144, frac = 0.959
[Tue Jan 17 14:09:02 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 24.48"
[Tue Jan 17 15:52:15 2012] fullrun_pn_xmm0604960901_pi300-10000_cl_pass1_src4.ximg exists
[Tue Jan 17 15:52:15 2012] fullrun_pn_xmm0604960901_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Jan 17 15:52:15 2012] Fit fullrun_pn_xmm0604960901_pi300-10000_cl_pass1_src4 appears to have run properly
[Tue Jan 17 15:52:15 2012] fullrun_pn_xmm0604960901_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Jan 17 15:52:15 2012] fullrun_pn_xmm0604960901_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Jan 17 15:52:15 2012] Fit fullrun_pn_xmm0604960901_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Tue Jan 17 17:06:13 2012] Spatial fit model total counts = 3269.360000, observed total counts = 3311.000000
[Tue Jan 17 17:06:13 2012] Offset between fit and detection position for source 4 = 1.552341 pixels
[Tue Jan 17 17:06:13 2012] 3171.110000 total counts/ 1753.040000 bgd. counts: snr = 33.868952
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.552341 pixels
  Position = (352.5, 492.4) = 3 32 11.57 -27 37 22.6
  Extent = 19.9 (18.6-20.8)", rotation angle = 0
  Source counts = 1418.1 +/- 56.3
  Background counts = 1753.0
  Rate = 0.02 +/- 0.0007
[Tue Jan 17 17:06:13 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 17:06:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 17:06:13 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 17:06:13 2012] Source does appear to be extended
[Tue Jan 17 17:06:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 17:06:33 2012] Counts = 1418.070000, rescaling region sizes by 2.000000
[Tue Jan 17 17:06:33 2012] XMMSAS src. selection expression = ellipse(30620.896600, 42788.154800, 2384.832069, 2384.832069, 0.000000, X, Y)
[Tue Jan 17 17:06:33 2012] Writing source region out to fullrun_pn_xmm0604960901_pi300-10000_pass1_cl_src4_src.reg
[Tue Jan 17 17:06:33 2012] Extracting stamp from image fullrun_pn_xmm0604960901_pi300-10000_cl_sm2.00.img.gz, (215, 355) - (490, 595)
[Tue Jan 17 17:06:33 2012] XMMSAS bgd. selection expression = annulus(30620.896600, 42788.154800, 7949.440229, 15898.880457, X, Y) && !ellipse(31390.122200, 30536.858800, 452.058413, 452.058413, 0.000000, X, Y) && !ellipse(26528.308746, 38329.943176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23553.642000, 39940.450000, 674.696019, 332.749610, -0.000000, X, Y) && !ellipse(30231.904694, 43226.449097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36033.818085, 40946.503754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24487.451447, 40543.534027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29403.389200, 40232.254000, 519.384815, 519.384815, 0.000000, X, Y) && !ellipse(26530.010620, 39304.402649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26665.294983, 38924.829041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27233.696930, 37922.818329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20960.547400, 37484.618200, 550.269616, 294.892008, 331.378352, X, Y) && !ellipse(39019.569038, 37290.494970, 626.303213, 311.948253, 37.340376, X, Y) && !ellipse(20978.190369, 36581.356812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30895.523956, 35879.430786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18828.849899, 35629.435883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36470.375600, 35609.498000, 475.250414, 475.250414, 0.000000, X, Y) && !ellipse(33339.629601, 35558.460501, 994.033717, 502.931508, -0.000000, X, Y) && !ellipse(18321.892000, 35156.146000, 1830.184053, 1830.184053, 0.000000, X, Y) && !ellipse(30799.659600, 34511.244000, 553.681616, 553.681616, 0.000000, X, Y) && !ellipse(40592.548187, 34088.897866, 715.902235, 475.207948, 4.110944, X, Y) && !ellipse(25664.740000, 33541.432400, 365.416811, 365.416811, 0.000000, X, Y) && !ellipse(25733.177600, 33086.906200, 425.112012, 425.112012, 0.000000, X, Y) && !ellipse(17811.393600, 30310.401200, 577.429617, 344.657610, 117.705590, X, Y) && !ellipse(30773.237600, 28940.574800, 446.691213, 446.691213, 0.000000, X, Y) && !ellipse(22210.900000, 28558.542000, 445.476813, 286.947208, 101.849111, X, Y) && !ellipse(34177.846405, 26797.417206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29920.142600, 26425.048400, 617.396818, 617.396818, 0.000000, X, Y) && !ellipse(26199.736800, 44958.918680, 1388.784040, 849.088024, 345.179400, X, Y)
[Tue Jan 17 17:06:33 2012] Writing fullrun_pn_xmm0604960901_pi300-10000_pass1_cl_src4.gif
[Tue Jan 17 17:12:21 2012] Mean detx,y = (-3817.17, -15385.79) 
[Tue Jan 17 17:12:34 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 17:17:19 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 17:17:20 2012] Setting source spectrum file to fullrun_pn_xmm0604960901_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Jan 17 17:17:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604960901_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Jan 17 20:09:54 2012] Updating aperture counts using extracted products
[Tue Jan 17 20:09:54 2012] Error reading totcts from fullrun_pn_xmm0604960901_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Jan 17 20:09:55 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 20:09:55 2012] Using photon index=1.80, rate=0.018, arf fullrun_pn_xmm0604960901_pi300-10000_pass1_cl_src4.arf
[Tue Jan 17 20:09:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 20:09:55 2012] Updating source flux to 1.2e-13
[Tue Jan 17 20:12:04 2012] Flag c found in src. 4 procflags, skipping spectral fitting