[Tue Jan 17 08:56:53 2012] Detection parameters: Position = (141.6, 369.5) = 3 33 22.91 -27 46 9.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 138.8 +/- 25.2 Background counts = 153.7 Rate = 0.001 +/- 0.0002 [Tue Jan 17 08:56:55 2012] Off-axis axis estimate = 12.49' [Tue Jan 17 09:01:45 2012] Using EEF radius (= 12.67 ")to estimate initial spatial extent for simple fitting [Tue Jan 17 09:01:45 2012] Initial guess for spatial extent in simple fitting = 12.67" [Tue Jan 17 09:01:45 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.052 [Tue Jan 17 09:01:45 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 12.67" [Tue Jan 17 10:35:47 2012] fullrun_pn_xmm0604960801_pi300-10000_cl_pass0_src32.ximg exists [Tue Jan 17 10:35:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960801_pi300-10000_cl_pass0_src32.csv [Tue Jan 17 10:35:47 2012] fullrun_pn_xmm0604960801_pi300-10000_cl_pass0_src32_1.ximg exists [Tue Jan 17 10:35:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960801_pi300-10000_cl_pass0_src32.csv [Tue Jan 17 10:35:47 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604960801_pi300-10000_cl_pass0_src32_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604960801_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jan 17 10:35:48 2012] fullrun_pn_xmm0604960801_pi300-10000_cl_pass0_tfrozen_src32.ximg exists [Tue Jan 17 10:35:48 2012] fullrun_pn_xmm0604960801_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists [Tue Jan 17 10:35:48 2012] Fit fullrun_pn_xmm0604960801_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly [Tue Jan 17 11:52:37 2012] Spatial fit model total counts = 2978.790000, observed total counts = 2976.000000 [Tue Jan 17 11:52:37 2012] Offset between fit and detection position for source 33 = 0.888247 pixels [Tue Jan 17 11:52:37 2012] 2978.468300 total counts/ 2945.950000 bgd. counts: snr = 0.599122 Spatial fit parameters: Offset between fit and detection position for source 33 = 0.888247 pixels Position = (140.9, 369.0) = 3 33 23.14 -27 46 18.3 Extent = 3.2" x 3.2", rotation angle = 0 Source counts = 32.5 +/- 54.6 Background counts = 2945.9 Rate = 0.0004 +/- 0.0006 Deleting source due to low Poisson probability