[Tue Jan 17 08:56:52 2012] Detection parameters:
  Position = (123.1, 226.0) = 3 33 29.07 -27 56 40.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1234.6 +/- 44.0
  Background counts = 111.7
  Rate = 0.01 +/- 0.0004

[Tue Jan 17 08:56:55 2012] Off-axis axis estimate = 13.76'
[Tue Jan 17 09:01:45 2012] Using EEF radius (= 13.31 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 09:01:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 09:01:45 2012] Initial guess for spatial extent in simple fitting = 13.31"
[Tue Jan 17 09:01:45 2012] source mask rpix=3.1, npix_max = 50, mask sum = 51, frac = 1.007
[Tue Jan 17 09:01:45 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 13.31"
[Tue Jan 17 10:35:46 2012] fullrun_pn_xmm0604960801_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jan 17 10:35:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960801_pi300-10000_cl_pass0_src3.csv
[Tue Jan 17 10:35:46 2012] fullrun_pn_xmm0604960801_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jan 17 10:35:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960801_pi300-10000_cl_pass0_src3.csv
[Tue Jan 17 10:35:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604960801_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604960801_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 10:35:47 2012] fullrun_pn_xmm0604960801_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jan 17 10:35:47 2012] fullrun_pn_xmm0604960801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jan 17 10:35:47 2012] Fit fullrun_pn_xmm0604960801_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Jan 17 11:52:37 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 17.284594 pixels away
[Tue Jan 17 11:52:37 2012] Source 3 is offset by -1.985060 and 0.719982 pixels which is larger than
2 X fitted extent = 1.511835 x 1.511835, not incorporating fit results
[Tue Jan 17 11:52:37 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 11:52:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 11:52:37 2012] Assessing source extent using major
[Tue Jan 17 11:52:37 2012] Source does appear to be extended
[Tue Jan 17 11:52:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 11:52:57 2012] Using EEF radius (= 13.31 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 11:52:57 2012] Initial guess for spatial extent in simple fitting = 13.31"
[Tue Jan 17 11:52:57 2012] source mask rpix=3.1, npix_max = 50, mask sum = 51, frac = 1.007
[Tue Jan 17 11:52:57 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 13.31"
[Tue Jan 17 14:10:23 2012] fullrun_pn_xmm0604960801_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jan 17 14:10:23 2012] fullrun_pn_xmm0604960801_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jan 17 14:10:23 2012] Fit fullrun_pn_xmm0604960801_pi300-10000_cl_pass1_src3 appears to have run properly
[Tue Jan 17 14:10:24 2012] fullrun_pn_xmm0604960801_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jan 17 14:10:24 2012] fullrun_pn_xmm0604960801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jan 17 14:10:24 2012] Fit fullrun_pn_xmm0604960801_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Jan 17 15:48:33 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 17.284594 pixels away
[Tue Jan 17 15:48:33 2012] Spatial fit model total counts = 1116.210000, observed total counts = 1211.000000
[Tue Jan 17 15:48:33 2012] Offset between fit and detection position for source 3 = 3.562674 pixels
[Tue Jan 17 15:48:33 2012] Warning, changing simple spatial fit ID from 3 to 54
[Tue Jan 17 15:48:33 2012] 1237.371000 total counts/ 1087.090000 bgd. counts: snr = 4.557969
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 3.562674 pixels
  Position = (124.9, 222.9) = 3 33 28.48 -27 56 53.4
  Extent = 10.8 (9.5-12.5)", rotation angle = 0
  Source counts = 150.3 +/- 35.2
  Background counts = 1087.1
  Rate = 0.002 +/- 0.0004
[Tue Jan 17 15:48:33 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 15:48:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 15:48:33 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 15:48:33 2012] Source does appear to be extended
[Tue Jan 17 15:48:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 15:49:01 2012] XMMSAS src. selection expression = ellipse(10815.516000, 19346.010000, 648.228019, 648.228019, 0.000000, X, Y)
[Tue Jan 17 15:49:01 2012] Writing source region out to fullrun_pn_xmm0604960801_pi300-10000_pass1_cl_src3_src.reg
[Tue Jan 17 15:49:01 2012] Extracting stamp from image fullrun_pn_xmm0604960801_pi300-10000_cl_sm2.00.img.gz, (88, 186) - (162, 260)
[Tue Jan 17 15:49:01 2012] XMMSAS bgd. selection expression = annulus(10815.516000, 19346.010000, 1080.380031, 2160.760062, X, Y) && !ellipse(9830.297500, 22374.636000, 1557.038618, 1557.038618, 0.000000, X, Y) && !ellipse(11611.804565, 18441.673615, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 17 15:49:01 2012] Writing fullrun_pn_xmm0604960801_pi300-10000_pass1_cl_src3.gif
[Tue Jan 17 15:52:35 2012] Mean detx,y = (-12241.14, 13503.35) 
[Tue Jan 17 15:52:40 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 15:53:05 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 15:53:05 2012] Setting source spectrum file to fullrun_pn_xmm0604960801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jan 17 15:53:05 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604960801_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jan 17 20:07:37 2012] Updating aperture counts using extracted products
[Tue Jan 17 20:07:37 2012] Error reading totcts from fullrun_pn_xmm0604960801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jan 17 20:07:39 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 20:07:39 2012] Using photon index=1.80, rate=0.0017, arf fullrun_pn_xmm0604960801_pi300-10000_pass1_cl_src3.arf
[Tue Jan 17 20:07:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 20:07:39 2012] Updating source flux to 1.8e-14
[Tue Jan 17 20:10:48 2012] Flag b found in src. 3 procflags, skipping spectral fitting