[Tue Jan 17 08:56:52 2012] Detection parameters:
  Position = (321.0, 437.0) = 3 32 24.10 -27 41 25.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.8 +/- 21.6
  Background counts = 147.0
  Rate = 0.001 +/- 0.0002

[Tue Jan 17 08:56:55 2012] Off-axis axis estimate = 10.18'
[Tue Jan 17 09:01:45 2012] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 09:01:45 2012] Initial guess for spatial extent in simple fitting = 11.52"
[Tue Jan 17 09:01:45 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.908
[Tue Jan 17 09:01:45 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 11.52"
[Tue Jan 17 10:35:46 2012] fullrun_pn_xmm0604960801_pi300-10000_cl_pass0_src14.ximg exists
[Tue Jan 17 10:35:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960801_pi300-10000_cl_pass0_src14.csv
[Tue Jan 17 10:35:46 2012] fullrun_pn_xmm0604960801_pi300-10000_cl_pass0_src14_1.ximg exists
[Tue Jan 17 10:35:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960801_pi300-10000_cl_pass0_src14.csv
[Tue Jan 17 10:35:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604960801_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604960801_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 10:35:48 2012] fullrun_pn_xmm0604960801_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Tue Jan 17 10:35:48 2012] fullrun_pn_xmm0604960801_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Tue Jan 17 10:35:48 2012] Fit fullrun_pn_xmm0604960801_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Tue Jan 17 11:52:37 2012] Source 14 is offset by -1.657481 and 6.667857 pixels which is larger than
2 X fitted extent = 1.335513 x 1.335513, not incorporating fit results
[Tue Jan 17 11:52:37 2012] Warning, spatial fit 14 centroid is now closest to src. 13
[Tue Jan 17 11:52:37 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 11:52:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 11:52:37 2012] Assessing source extent using major
[Tue Jan 17 11:52:37 2012] Source does appear to be extended
[Tue Jan 17 11:52:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 11:52:57 2012] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 11:52:57 2012] Initial guess for spatial extent in simple fitting = 11.52"
[Tue Jan 17 11:52:57 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.908
[Tue Jan 17 11:52:57 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 11.52"
[Tue Jan 17 14:10:23 2012] fullrun_pn_xmm0604960801_pi300-10000_cl_pass1_src13.ximg exists
[Tue Jan 17 14:10:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960801_pi300-10000_cl_pass1_src13.csv
[Tue Jan 17 14:10:23 2012] fullrun_pn_xmm0604960801_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue Jan 17 14:10:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604960801_pi300-10000_cl_pass1_src13.csv
[Tue Jan 17 14:10:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604960801_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604960801_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 14:10:24 2012] fullrun_pn_xmm0604960801_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue Jan 17 14:10:24 2012] fullrun_pn_xmm0604960801_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Jan 17 14:10:24 2012] Fit fullrun_pn_xmm0604960801_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Tue Jan 17 15:48:33 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 15.694405 pixels away
[Tue Jan 17 15:48:33 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 15:48:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 15:48:33 2012] Assessing source extent using major
[Tue Jan 17 15:48:33 2012] Source does appear to be extended
[Tue Jan 17 15:48:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 15:49:02 2012] XMMSAS src. selection expression = ellipse(27880.815186, 37969.087524, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan 17 15:49:02 2012] Writing source region out to fullrun_pn_xmm0604960801_pi300-10000_pass1_cl_src14_src.reg
[Tue Jan 17 15:49:02 2012] Extracting stamp from image fullrun_pn_xmm0604960801_pi300-10000_cl_sm2.00.img.gz, (284, 399) - (359, 474)
[Tue Jan 17 15:49:02 2012] XMMSAS bgd. selection expression = annulus(27880.815186, 37969.087524, 1087.500000, 2175.000000, X, Y) && !ellipse(27116.388800, 38310.702400, 430.988012, 430.988012, 0.000000, X, Y) && !ellipse(30017.646484, 40238.598602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27258.689000, 39773.620000, 1899.824055, 1899.824055, 0.000000, X, Y) && !ellipse(27265.373600, 38910.398000, 337.202410, 337.202410, 0.000000, X, Y) && !ellipse(26991.952400, 37499.658600, 583.692817, 257.718407, 321.796000, X, Y) && !ellipse(30698.371600, 36346.307200, 683.872820, 683.872820, 0.000000, X, Y) && !ellipse(29707.861880, 35942.918000, 651.196819, 651.196819, 0.000000, X, Y)
[Tue Jan 17 15:49:02 2012] Writing fullrun_pn_xmm0604960801_pi300-10000_pass1_cl_src14.gif
[Tue Jan 17 16:19:46 2012] Mean detx,y = (-4309.26, -10349.31) 
[Tue Jan 17 16:19:52 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 16:20:09 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 16:20:09 2012] Setting source spectrum file to fullrun_pn_xmm0604960801_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue Jan 17 16:20:09 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604960801_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Tue Jan 17 17:37:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jan 17 17:37:54 2012] rmf not generated due to insufficient counts
[Tue Jan 17 20:07:37 2012] Updating aperture counts using extracted products
[Tue Jan 17 20:07:37 2012] Error reading totcts from fullrun_pn_xmm0604960801_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue Jan 17 20:07:39 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 20:07:39 2012] Using photon index=1.80, rate=0.00114, arf fullrun_pn_xmm0604960801_pi300-10000_pass1_cl_src14.arf
[Tue Jan 17 20:07:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 20:07:39 2012] Updating source flux to 5.8e-15
[Tue Jan 17 20:10:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting