[Tue Jan 17 08:56:58 2012] Detection parameters:
  Position = (276.6, 221.0) = 3 32 38.66 -27 57 3.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.7 +/- 16.4
  Background counts = 115.1
  Rate = 0.002 +/- 0.0003

[Tue Jan 17 08:56:58 2012] Off-axis axis estimate = 5.83'
[Tue Jan 17 11:15:28 2012] Using EEF radius (= 9.34 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 11:15:28 2012] Initial guess for spatial extent in simple fitting = 9.34"
[Tue Jan 17 11:15:28 2012] source mask rpix=2.1, npix_max = 28, mask sum = 17, frac = 0.606
[Tue Jan 17 11:15:28 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 9.34"
[Tue Jan 17 11:52:24 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_src14.ximg exists
[Tue Jan 17 11:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_src14.csv
[Tue Jan 17 11:52:24 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_src14_1.ximg exists
[Tue Jan 17 11:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_src14.csv
[Tue Jan 17 11:52:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 11:52:24 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Tue Jan 17 11:52:24 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Tue Jan 17 11:52:24 2012] Fit fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Tue Jan 17 11:52:45 2012] Source 26 is offset by 1.894998 and -9.705817 pixels which is larger than
2 X fitted extent = 1.089117 x 1.089117, not incorporating fit results
[Tue Jan 17 11:52:45 2012] Spatial fit model total counts = 518.999000, observed total counts = 519.000000
[Tue Jan 17 11:52:45 2012] Offset between fit and detection position for source 26 = 1.553115 pixels
[Tue Jan 17 11:52:45 2012] 466.313300 total counts/ 397.518000 bgd. counts: snr = 3.450487
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 1.553115 pixels
  Position = (275.1, 221.0) = 3 32 39.18 -27 57 2.7
  Extent = 5.4 (3.9-7.8)", rotation angle = 0
  Source counts = 68.8 +/- 21.6
  Background counts = 397.5
  Rate = 0.0007 +/- 0.0002
[Tue Jan 17 11:52:45 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 11:52:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 11:52:45 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 11:52:45 2012] Source does appear to be extended
[Tue Jan 17 11:52:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 15:07:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 15:07:05 2012] Initial guess for spatial extent in simple fitting = 5.45"
[Tue Jan 17 15:07:05 2012] source mask rpix=1.3, npix_max = 12, mask sum = 15, frac = 1.222
[Tue Jan 17 15:07:05 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 5.45"
[Tue Jan 17 15:48:19 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_src14.ximg exists
[Tue Jan 17 15:48:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_src14.csv
[Tue Jan 17 15:48:19 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_src14_1.ximg exists
[Tue Jan 17 15:48:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_src14.csv
[Tue Jan 17 15:48:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 15:48:20 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Tue Jan 17 15:48:20 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Tue Jan 17 15:48:20 2012] Fit fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Tue Jan 17 15:48:44 2012] Spatial fit model total counts = 737.000000, observed total counts = 737.000000
[Tue Jan 17 15:48:44 2012] Offset between fit and detection position for source 26 = 0.086162 pixels
[Tue Jan 17 15:48:44 2012] 480.298200 total counts/ 413.867000 bgd. counts: snr = 3.265440
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.086162 pixels
  Position = (275.1, 221.0) = 3 32 39.15 -27 57 2.7
  Extent = 5.3 (3.8-7.0)", rotation angle = 0
  Source counts = 66.4 +/- 21.9
  Background counts = 413.9
  Rate = 0.0007 +/- 0.0002
[Tue Jan 17 15:48:44 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 15:48:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 15:48:44 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 15:48:44 2012] Source does appear to be extended
[Tue Jan 17 15:48:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 19:19:25 2012] XMMSAS src. selection expression = ellipse(23888.800300, 19175.807200, 316.131009, 316.131009, 0.000000, X, Y)
[Tue Jan 17 19:19:25 2012] Writing source region out to fullrun_mos2_xmm0604960801_pi300-10000_pass1_cl_src26_src.reg
[Tue Jan 17 19:19:25 2012] Extracting stamp from image fullrun_mos2_xmm0604960801_pi300-10000_cl_sm2.00.img.gz, (257, 203) - (293, 239)
[Tue Jan 17 19:19:25 2012] XMMSAS bgd. selection expression = annulus(23888.800300, 19175.807200, 526.885015, 1053.770030, X, Y) && !ellipse(23127.553891, 19150.296216, 528.423327, 429.634285, 22.080240, X, Y)
[Tue Jan 17 19:19:25 2012] Writing fullrun_mos2_xmm0604960801_pi300-10000_pass1_cl_src26.gif
[Tue Jan 17 19:22:46 2012] Mean detx,y = (253.38, -8612.71) 
[Tue Jan 17 19:22:47 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 19:23:00 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 19:23:00 2012] Setting source spectrum file to fullrun_mos2_xmm0604960801_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Tue Jan 17 19:23:00 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604960801_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Tue Jan 17 19:52:31 2012] Not generating rmf since there are only 66 counts
[Tue Jan 17 19:52:31 2012] rmf not generated due to insufficient counts
[Tue Jan 17 20:07:44 2012] Updating aperture counts using extracted products
[Tue Jan 17 20:07:44 2012] Error reading totcts from fullrun_mos2_xmm0604960801_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Tue Jan 17 20:07:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 20:07:45 2012] Using photon index=1.80, rate=0.000681, arf fullrun_mos2_xmm0604960801_pi300-10000_pass1_cl_src26.arf
[Tue Jan 17 20:07:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 20:07:45 2012] Updating source flux to 1.2e-14
[Tue Jan 17 20:09:22 2012] Flag b found in src. 26 procflags, skipping spectral fitting
[Tue Jan 17 20:09:22 2012] Source 26 has fewer than 100.000000 counts, skipping spectral fitting