[Tue Jan 17 08:56:58 2012] Detection parameters:
  Position = (188.1, 298.0) = 3 33 7.70 -27 51 27.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 238.8 +/- 23.3
  Background counts = 108.2
  Rate = 0.002 +/- 0.0002

[Tue Jan 17 08:56:58 2012] Off-axis axis estimate = 8.00'
[Tue Jan 17 11:15:28 2012] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 11:15:28 2012] Initial guess for spatial extent in simple fitting = 10.43"
[Tue Jan 17 11:15:28 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.072
[Tue Jan 17 11:15:28 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 10.43"
[Tue Jan 17 11:52:24 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_src12.ximg exists
[Tue Jan 17 11:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_src12.csv
[Tue Jan 17 11:52:24 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_src12_1.ximg exists
[Tue Jan 17 11:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_src12.csv
[Tue Jan 17 11:52:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 11:52:24 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Tue Jan 17 11:52:24 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Tue Jan 17 11:52:24 2012] Fit fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Tue Jan 17 11:52:45 2012] Source 17 is offset by 3.972695 and 8.567807 pixels which is larger than
2 X fitted extent = 1.366342 x 1.366342, not incorporating fit results
[Tue Jan 17 11:52:45 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 11:52:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 11:52:45 2012] Assessing source extent using major
[Tue Jan 17 11:52:45 2012] Source does appear to be extended
[Tue Jan 17 11:52:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 15:07:05 2012] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 15:07:05 2012] Initial guess for spatial extent in simple fitting = 10.43"
[Tue Jan 17 15:07:05 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.072
[Tue Jan 17 15:07:05 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 10.43"
[Tue Jan 17 15:48:19 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_src12.ximg exists
[Tue Jan 17 15:48:19 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_src12_1.ximg exists
[Tue Jan 17 15:48:19 2012] Fit fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_src12 appears to have run properly
[Tue Jan 17 15:48:20 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Tue Jan 17 15:48:20 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Tue Jan 17 15:48:20 2012] Fit fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Tue Jan 17 15:48:44 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 12.808947 pixels away
[Tue Jan 17 15:48:44 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 15:48:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 15:48:44 2012] Assessing source extent using major
[Tue Jan 17 15:48:44 2012] Source does appear to be extended
[Tue Jan 17 15:48:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 19:19:25 2012] XMMSAS src. selection expression = ellipse(16313.472488, 25875.543243, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan 17 19:19:25 2012] Writing source region out to fullrun_mos2_xmm0604960801_pi300-10000_pass1_cl_src17_src.reg
[Tue Jan 17 19:19:25 2012] Extracting stamp from image fullrun_mos2_xmm0604960801_pi300-10000_cl_sm2.00.img.gz, (151, 260) - (226, 335)
[Tue Jan 17 19:19:25 2012] XMMSAS bgd. selection expression = annulus(16313.472488, 25875.543243, 1087.500000, 2175.000000, X, Y)
[Tue Jan 17 19:19:25 2012] Writing fullrun_mos2_xmm0604960801_pi300-10000_pass1_cl_src17.gif
[Tue Jan 17 19:22:05 2012] Mean detx,y = (9903.96, -5658.29) 
[Tue Jan 17 19:22:07 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 19:22:25 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 19:22:25 2012] Setting source spectrum file to fullrun_mos2_xmm0604960801_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Jan 17 19:22:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604960801_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Tue Jan 17 19:52:25 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jan 17 19:52:25 2012] rmf not generated due to insufficient counts
[Tue Jan 17 20:07:44 2012] Updating aperture counts using extracted products
[Tue Jan 17 20:07:44 2012] Error reading totcts from fullrun_mos2_xmm0604960801_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Jan 17 20:07:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 20:07:45 2012] Using photon index=1.80, rate=0.00212, arf fullrun_mos2_xmm0604960801_pi300-10000_pass1_cl_src17.arf
[Tue Jan 17 20:07:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 20:07:45 2012] Updating source flux to 4.2e-14
[Tue Jan 17 20:09:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting