[Tue Jan 17 08:56:57 2012] Detection parameters:
  Position = (129.6, 336.1) = 3 33 26.86 -27 48 38.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.2 +/- 16.3
  Background counts = 67.7
  Rate = 0.0006 +/- 0.0001

[Tue Jan 17 08:56:58 2012] Off-axis axis estimate = 12.54'
[Tue Jan 17 11:15:28 2012] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 11:15:28 2012] Initial guess for spatial extent in simple fitting = 12.70"
[Tue Jan 17 11:15:28 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.048
[Tue Jan 17 11:15:28 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 12.70"
[Tue Jan 17 11:52:24 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_src26.ximg exists
[Tue Jan 17 11:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_src26.csv
[Tue Jan 17 11:52:24 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_src26_1.ximg exists
[Tue Jan 17 11:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_src26.csv
[Tue Jan 17 11:52:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 11:52:25 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Tue Jan 17 11:52:25 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Tue Jan 17 11:52:25 2012] Fit fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Tue Jan 17 11:52:45 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 15.471264 pixels away
[Tue Jan 17 11:52:45 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 11:52:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 11:52:45 2012] Assessing source extent using major
[Tue Jan 17 11:52:45 2012] Source does appear to be extended
[Tue Jan 17 11:52:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 15:07:05 2012] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 15:07:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 15:07:05 2012] Initial guess for spatial extent in simple fitting = 12.70"
[Tue Jan 17 15:07:05 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.048
[Tue Jan 17 15:07:05 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 12.70"
[Tue Jan 17 15:48:20 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_src26.ximg exists
[Tue Jan 17 15:48:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_src26.csv
[Tue Jan 17 15:48:20 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_src26_1.ximg exists
[Tue Jan 17 15:48:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_src26.csv
[Tue Jan 17 15:48:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 15:48:20 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Tue Jan 17 15:48:20 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Tue Jan 17 15:48:20 2012] Fit fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Tue Jan 17 15:48:44 2012] Spatial fit model total counts = 431.704000, observed total counts = 466.000000
[Tue Jan 17 15:48:44 2012] Offset between fit and detection position for source 16 = 6.424881 pixels
[Tue Jan 17 15:48:44 2012] 490.019200 total counts/ 92.135200 bgd. counts: snr = 41.451828
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 6.424881 pixels
  Position = (127.0, 330.2) = 3 33 27.70 -27 49 6.8
  Extent = 25.4 (25.3-25.4)", rotation angle = 0
  Source counts = 397.9 +/- 22.1
  Background counts = 92.1
  Rate = 0.004 +/- 0.0002
[Tue Jan 17 15:48:44 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 15:48:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 15:48:44 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 15:48:44 2012] Source does appear to be extended
[Tue Jan 17 15:48:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 19:19:25 2012] XMMSAS src. selection expression = ellipse(11002.795600, 28678.860000, 1522.983995, 1522.983995, 0.000000, X, Y)
[Tue Jan 17 19:19:25 2012] Writing source region out to fullrun_mos2_xmm0604960801_pi300-10000_pass1_cl_src16_src.reg
[Tue Jan 17 19:19:25 2012] Extracting stamp from image fullrun_mos2_xmm0604960801_pi300-10000_cl_sm2.00.img.gz, (39, 243) - (215, 418)
[Tue Jan 17 19:19:25 2012] XMMSAS bgd. selection expression = annulus(11002.795600, 28678.860000, 2538.306659, 5076.613317, X, Y) && !ellipse(16313.472488, 25875.543243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12909.601800, 30103.004120, 589.935380, 589.935380, 0.000000, X, Y)
[Tue Jan 17 19:19:25 2012] Writing fullrun_mos2_xmm0604960801_pi300-10000_pass1_cl_src16.gif
[Tue Jan 17 19:25:56 2012] Mean detx,y = (15437.51, -5081.42) 
[Tue Jan 17 19:25:57 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 19:26:34 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 19:26:34 2012] Setting source spectrum file to fullrun_mos2_xmm0604960801_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Jan 17 19:26:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604960801_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Tue Jan 17 20:07:44 2012] Updating aperture counts using extracted products
[Tue Jan 17 20:07:44 2012] Error reading totcts from fullrun_mos2_xmm0604960801_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Jan 17 20:07:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 20:07:45 2012] Using photon index=1.80, rate=0.00408, arf fullrun_mos2_xmm0604960801_pi300-10000_pass1_cl_src16.arf
[Tue Jan 17 20:07:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 20:07:45 2012] Updating source flux to 1.3e-13