[Tue Jan 17 08:56:57 2012] Detection parameters:
  Position = (303.4, 380.1) = 3 32 29.88 -27 45 30.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.6 +/- 19.4
  Background counts = 136.0
  Rate = 0.001 +/- 0.0002

[Tue Jan 17 08:56:58 2012] Off-axis axis estimate = 5.93'
[Tue Jan 17 11:15:28 2012] Using EEF radius (= 9.40 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 11:15:28 2012] Initial guess for spatial extent in simple fitting = 9.40"
[Tue Jan 17 11:15:28 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.060
[Tue Jan 17 11:15:28 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 9.40"
[Tue Jan 17 11:52:24 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_src21.ximg exists
[Tue Jan 17 11:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_src21.csv
[Tue Jan 17 11:52:24 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_src21_1.ximg exists
[Tue Jan 17 11:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_src21.csv
[Tue Jan 17 11:52:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 11:52:24 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Tue Jan 17 11:52:25 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Tue Jan 17 11:52:25 2012] Fit fullrun_mos2_xmm0604960801_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Tue Jan 17 11:52:45 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 12.597662 pixels away
[Tue Jan 17 11:52:45 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 11:52:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 11:52:45 2012] Assessing source extent using major
[Tue Jan 17 11:52:45 2012] Source does appear to be extended
[Tue Jan 17 11:52:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 11:52:45 2012] Source is confused with source 12
[Tue Jan 17 15:07:05 2012] Using EEF radius (= 9.40 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 15:07:05 2012] Initial guess for spatial extent in simple fitting = 9.40"
[Tue Jan 17 15:07:05 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.060
[Tue Jan 17 15:07:05 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 9.40"
[Tue Jan 17 15:48:20 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_src21.ximg exists
[Tue Jan 17 15:48:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_src21.csv
[Tue Jan 17 15:48:20 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_src21_1.ximg exists
[Tue Jan 17 15:48:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_src21.csv
[Tue Jan 17 15:48:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 15:48:20 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Tue Jan 17 15:48:20 2012] fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Tue Jan 17 15:48:20 2012] Fit fullrun_mos2_xmm0604960801_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Tue Jan 17 15:48:44 2012] Source 13 is offset by 1.072433 and -5.669973 pixels which is larger than
2 X fitted extent = 1.626005 x 1.626005, not incorporating fit results
[Tue Jan 17 15:48:44 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 15:48:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 15:48:44 2012] Assessing source extent using major
[Tue Jan 17 15:48:44 2012] Source does appear to be extended
[Tue Jan 17 15:48:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 19:19:25 2012] XMMSAS src. selection expression = ellipse(26345.098450, 33022.972382, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan 17 19:19:25 2012] Writing source region out to fullrun_mos2_xmm0604960801_pi300-10000_pass1_cl_src13_src.reg
[Tue Jan 17 19:19:25 2012] Extracting stamp from image fullrun_mos2_xmm0604960801_pi300-10000_cl_sm2.00.img.gz, (266, 343) - (341, 418)
[Tue Jan 17 19:19:25 2012] XMMSAS bgd. selection expression = annulus(26345.098450, 33022.972382, 1087.500000, 2175.000000, X, Y) && !ellipse(26249.729400, 33518.263400, 264.224008, 264.224008, 0.000000, X, Y)
[Tue Jan 17 19:19:25 2012] Writing fullrun_mos2_xmm0604960801_pi300-10000_pass1_cl_src13.gif
[Tue Jan 17 19:24:40 2012] Mean detx,y = (3795.21, 5099.41) 
[Tue Jan 17 19:24:41 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 19:24:51 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 19:24:51 2012] Setting source spectrum file to fullrun_mos2_xmm0604960801_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Jan 17 19:24:51 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604960801_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Tue Jan 17 19:56:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jan 17 19:56:29 2012] rmf not generated due to insufficient counts
[Tue Jan 17 20:07:44 2012] Updating aperture counts using extracted products
[Tue Jan 17 20:07:44 2012] Error reading totcts from fullrun_mos2_xmm0604960801_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Jan 17 20:07:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 20:07:45 2012] Using photon index=1.80, rate=0.00132, arf fullrun_mos2_xmm0604960801_pi300-10000_pass1_cl_src13.arf
[Tue Jan 17 20:07:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 20:07:45 2012] Updating source flux to 1.9e-14
[Tue Jan 17 20:09:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting