[Tue Jan 17 08:56:55 2012] Detection parameters:
  Position = (345.4, 462.9) = 3 32 16.14 -27 39 30.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 258.7 +/- 24.5
  Background counts = 111.3
  Rate = 0.002 +/- 0.0002

[Tue Jan 17 08:56:56 2012] Off-axis axis estimate = 12.40'
[Tue Jan 17 10:35:48 2012] Using EEF radius (= 12.63 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 10:35:48 2012] Initial guess for spatial extent in simple fitting = 12.63"
[Tue Jan 17 10:35:48 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.058
[Tue Jan 17 10:35:48 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 12.63"
[Tue Jan 17 11:15:27 2012] fullrun_mos1_xmm0604960801_pi300-10000_cl_pass0_src7.ximg exists
[Tue Jan 17 11:15:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604960801_pi300-10000_cl_pass0_src7.csv
[Tue Jan 17 11:15:27 2012] fullrun_mos1_xmm0604960801_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Jan 17 11:15:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604960801_pi300-10000_cl_pass0_src7.csv
[Tue Jan 17 11:15:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604960801_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604960801_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 11:15:27 2012] fullrun_mos1_xmm0604960801_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Jan 17 11:15:27 2012] fullrun_mos1_xmm0604960801_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Jan 17 11:15:27 2012] Fit fullrun_mos1_xmm0604960801_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Jan 17 11:52:40 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.365334 pixels away
[Tue Jan 17 11:52:40 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 11:52:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 11:52:40 2012] Assessing source extent using major
[Tue Jan 17 11:52:40 2012] Source does appear to be extended
[Tue Jan 17 11:52:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 14:10:24 2012] Using EEF radius (= 12.63 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 14:10:24 2012] Initial guess for spatial extent in simple fitting = 12.63"
[Tue Jan 17 14:10:24 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.058
[Tue Jan 17 14:10:24 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 12.63"
[Tue Jan 17 15:07:04 2012] fullrun_mos1_xmm0604960801_pi300-10000_cl_pass1_src7.ximg exists
[Tue Jan 17 15:07:04 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0604960801_pi300-10000_cl_pass1_src7.csv
[Tue Jan 17 15:07:04 2012] fullrun_mos1_xmm0604960801_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Jan 17 15:07:04 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0604960801_pi300-10000_cl_pass1_src7.csv
[Tue Jan 17 15:07:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604960801_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604960801_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 15:07:04 2012] fullrun_mos1_xmm0604960801_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Jan 17 15:07:04 2012] fullrun_mos1_xmm0604960801_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Jan 17 15:07:04 2012] Fit fullrun_mos1_xmm0604960801_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue Jan 17 15:48:38 2012] Spatial fit model total counts = 781.000000, observed total counts = 781.000000
[Tue Jan 17 15:48:38 2012] Offset between fit and detection position for source 5 = 0.509949 pixels
[Tue Jan 17 15:48:38 2012] 774.713000 total counts/ 615.135000 bgd. counts: snr = 6.434100
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.509949 pixels
  Position = (344.9, 462.8) = 3 32 16.30 -27 39 30.9
  Extent = 5.8 (4.7-6.9)", rotation angle = 0
  Source counts = 159.6 +/- 27.8
  Background counts = 615.1
  Rate = 0.002 +/- 0.0003
[Tue Jan 17 15:48:38 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 15:48:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 15:48:38 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 15:48:38 2012] Source does appear to be extended
[Tue Jan 17 15:48:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 18:37:06 2012] XMMSAS src. selection expression = ellipse(29954.053780, 40210.812000, 348.122410, 348.122410, 0.000000, X, Y)
[Tue Jan 17 18:37:06 2012] Writing source region out to fullrun_mos1_xmm0604960801_pi300-10000_pass1_cl_src5_src.reg
[Tue Jan 17 18:37:06 2012] Extracting stamp from image fullrun_mos1_xmm0604960801_pi300-10000_cl_sm2.00.img.gz, (325, 443) - (365, 483)
[Tue Jan 17 18:37:06 2012] XMMSAS bgd. selection expression = annulus(29954.053780, 40210.812000, 580.204017, 1160.408033, X, Y) && !ellipse(27795.584000, 39404.222000, 1255.640036, 1255.640036, 0.000000, X, Y)
[Tue Jan 17 18:37:06 2012] Writing fullrun_mos1_xmm0604960801_pi300-10000_pass1_cl_src5.gif
[Tue Jan 17 18:38:53 2012] Mean detx,y = (13279.62, -3567.07) 
[Tue Jan 17 18:38:54 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 18:39:01 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 18:39:02 2012] Setting source spectrum file to fullrun_mos1_xmm0604960801_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Jan 17 18:39:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604960801_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue Jan 17 20:07:41 2012] Updating aperture counts using extracted products
[Tue Jan 17 20:07:41 2012] Error reading totcts from fullrun_mos1_xmm0604960801_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Jan 17 20:07:43 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 20:07:43 2012] Using photon index=1.80, rate=0.00164, arf fullrun_mos1_xmm0604960801_pi300-10000_pass1_cl_src5.arf
[Tue Jan 17 20:07:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 20:07:43 2012] Updating source flux to 4.5e-14