[Tue Jan 17 19:31:51 2012] Detection parameters:
  Position = (436.1, 458.5) = 3 31 44.26 -27 38 33.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.7 +/- 22.5
  Background counts = 158.0
  Rate = 0.001 +/- 0.0002

[Tue Jan 17 19:31:53 2012] Off-axis axis estimate = 15.31'
[Tue Jan 17 21:26:31 2012] Using EEF radius (= 14.08 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 21:26:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 21:26:31 2012] Initial guess for spatial extent in simple fitting = 14.08"
[Tue Jan 17 21:26:31 2012] source mask rpix=3.2, npix_max = 55, mask sum = 54, frac = 0.967
[Tue Jan 17 21:26:31 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 14.08"
[Tue Jan 17 22:08:47 2012] fullrun_mos2_xmm0604960701_pi300-10000_cl_pass0_src29.ximg exists
[Tue Jan 17 22:08:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960701_pi300-10000_cl_pass0_src29.csv
[Tue Jan 17 22:08:47 2012] fullrun_mos2_xmm0604960701_pi300-10000_cl_pass0_src29_1.ximg exists
[Tue Jan 17 22:08:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960701_pi300-10000_cl_pass0_src29.csv
[Tue Jan 17 22:08:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960701_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960701_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 22:08:47 2012] fullrun_mos2_xmm0604960701_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Tue Jan 17 22:08:47 2012] fullrun_mos2_xmm0604960701_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Tue Jan 17 22:08:47 2012] Fit fullrun_mos2_xmm0604960701_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Tue Jan 17 22:09:03 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 10.520851 pixels away
[Tue Jan 17 22:09:03 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 22:09:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 22:09:03 2012] Assessing source extent using major
[Tue Jan 17 22:09:03 2012] Source does appear to be extended
[Tue Jan 17 22:09:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 23:38:35 2012] Using EEF radius (= 14.08 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 23:38:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 23:38:35 2012] Initial guess for spatial extent in simple fitting = 14.08"
[Tue Jan 17 23:38:35 2012] source mask rpix=3.2, npix_max = 55, mask sum = 54, frac = 0.967
[Tue Jan 17 23:38:35 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 14.08"
[Wed Jan 18 00:18:54 2012] fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_src29.ximg exists
[Wed Jan 18 00:18:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_src29.csv
[Wed Jan 18 00:18:54 2012] fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_src29_1.ximg exists
[Wed Jan 18 00:18:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_src29.csv
[Wed Jan 18 00:18:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 00:18:55 2012] fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Wed Jan 18 00:18:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_tfrozen_src29.csv
[Wed Jan 18 00:18:55 2012] fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Wed Jan 18 00:18:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_tfrozen_src29.csv
[Wed Jan 18 00:18:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 00:19:07 2012] Spatial fit model total counts = 950.628000, observed total counts = 1056.000000
[Wed Jan 18 00:19:07 2012] Offset between fit and detection position for source 5 = 7.283370 pixels
[Wed Jan 18 00:19:07 2012] 846.730870 total counts/ 3.291870 bgd. counts: snr = 464.870878
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 7.283370 pixels
  Position = (442.0, 454.3) = 3 31 42.31 -27 39 2.7
  Extent = 26.0 (22.6-27.9)", rotation angle = 0
  Source counts = 843.4 +/- 29.1
  Background counts = 3.3
  Rate = 0.008 +/- 0.0003
[Wed Jan 18 00:19:07 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 00:19:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 00:19:07 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 00:19:07 2012] Source does appear to be extended
[Wed Jan 18 00:19:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 03:00:23 2012] XMMSAS src. selection expression = ellipse(38406.614000, 39474.784000, 1557.096045, 1557.096045, 0.000000, X, Y)
[Wed Jan 18 03:00:23 2012] Writing source region out to fullrun_mos2_xmm0604960701_pi300-10000_pass1_cl_src5_src.reg
[Wed Jan 18 03:00:23 2012] Extracting stamp from image fullrun_mos2_xmm0604960701_pi300-10000_cl_sm2.00.img.gz, (353, 365) - (532, 544)
[Wed Jan 18 03:00:23 2012] XMMSAS bgd. selection expression = annulus(38406.614000, 39474.784000, 2595.160075, 5190.320149, X, Y) && !ellipse(39061.316132, 35974.895020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33273.517686, 34153.395400, 440.339199, 440.339199, 0.000000, X, Y) && !ellipse(35119.465820, 41172.603394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36060.599764, 36860.549304, 569.707740, 197.076191, 0.000000, X, Y) && !ellipse(34809.520355, 40163.145325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35828.902924, 41451.485016, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 18 03:00:23 2012] Writing fullrun_mos2_xmm0604960701_pi300-10000_pass1_cl_src5.gif
[Wed Jan 18 03:07:51 2012] Mean detx,y = (-4410.65, 15405.15) 
[Wed Jan 18 03:07:52 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 18 03:08:22 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 18 03:08:22 2012] Setting source spectrum file to fullrun_mos2_xmm0604960701_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jan 18 03:08:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604960701_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Jan 18 03:30:36 2012] Updating aperture counts using extracted products
[Wed Jan 18 03:30:36 2012] Error reading totcts from fullrun_mos2_xmm0604960701_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jan 18 03:30:37 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 03:30:37 2012] Using photon index=1.80, rate=0.00815, arf fullrun_mos2_xmm0604960701_pi300-10000_pass1_cl_src5.arf
[Wed Jan 18 03:30:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 18 03:30:37 2012] Updating source flux to 2.3e-13