[Tue Jan 17 19:31:52 2012] Detection parameters:
  Position = (383.3, 393.6) = 3 32 1.51 -27 43 24.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.8 +/- 21.4
  Background counts = 202.1
  Rate = 0.002 +/- 0.0003

[Tue Jan 17 19:31:53 2012] Off-axis axis estimate = 9.24'
[Tue Jan 17 21:26:31 2012] Using EEF radius (= 11.05 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 21:26:31 2012] Initial guess for spatial extent in simple fitting = 11.05"
[Tue Jan 17 21:26:31 2012] source mask rpix=2.5, npix_max = 36, mask sum = 34, frac = 0.919
[Tue Jan 17 21:26:31 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 11.05"
[Tue Jan 17 22:08:46 2012] fullrun_mos2_xmm0604960701_pi300-10000_cl_pass0_src13.ximg exists
[Tue Jan 17 22:08:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960701_pi300-10000_cl_pass0_src13.csv
[Tue Jan 17 22:08:46 2012] fullrun_mos2_xmm0604960701_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue Jan 17 22:08:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960701_pi300-10000_cl_pass0_src13.csv
[Tue Jan 17 22:08:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960701_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960701_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 22:08:47 2012] fullrun_mos2_xmm0604960701_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue Jan 17 22:08:47 2012] fullrun_mos2_xmm0604960701_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Jan 17 22:08:47 2012] Fit fullrun_mos2_xmm0604960701_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Tue Jan 17 22:09:03 2012] Spatial fit model total counts = 1136.360000, observed total counts = 1136.000000
[Tue Jan 17 22:09:03 2012] Offset between fit and detection position for source 18 = 0.559868 pixels
[Tue Jan 17 22:09:03 2012] 1143.440200 total counts/ 1067.180000 bgd. counts: snr = 2.334421
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.559868 pixels
  Position = (383.0, 393.1) = 3 32 1.61 -27 43 29.1
  Extent = 5.5 (3.4-8.5)", rotation angle = 0
  Source counts = 76.3 +/- 33.8
  Background counts = 1067.2
  Rate = 0.0007 +/- 0.0003
[Tue Jan 17 22:09:03 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 22:09:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 22:09:03 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 22:09:03 2012] Source does appear to be extended
[Tue Jan 17 22:09:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 23:38:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 23:38:35 2012] Initial guess for spatial extent in simple fitting = 5.50"
[Tue Jan 17 23:38:35 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.284
[Tue Jan 17 23:38:35 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 5.50"
[Wed Jan 18 00:18:54 2012] fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_src13.ximg exists
[Wed Jan 18 00:18:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_src13.csv
[Wed Jan 18 00:18:54 2012] fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed Jan 18 00:18:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_src13.csv
[Wed Jan 18 00:18:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 00:18:55 2012] fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed Jan 18 00:18:55 2012] fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed Jan 18 00:18:55 2012] Fit fullrun_mos2_xmm0604960701_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Wed Jan 18 00:19:07 2012] Warning, spatial fit 13 centroid is now closest to src. 17
[Wed Jan 18 00:19:07 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 00:19:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 00:19:07 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 00:19:07 2012] Source does appear to be extended
[Wed Jan 18 00:19:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 03:00:23 2012] XMMSAS src. selection expression = ellipse(33273.517686, 34153.395400, 330.254399, 330.254399, 0.000000, X, Y)
[Wed Jan 18 03:00:23 2012] Writing source region out to fullrun_mos2_xmm0604960701_pi300-10000_pass1_cl_src18_src.reg
[Wed Jan 18 03:00:23 2012] Extracting stamp from image fullrun_mos2_xmm0604960701_pi300-10000_cl_sm2.00.img.gz, (364, 374) - (402, 412)
[Wed Jan 18 03:00:23 2012] XMMSAS bgd. selection expression = annulus(33273.517686, 34153.395400, 550.423999, 1100.847998, X, Y)
[Wed Jan 18 03:00:23 2012] Writing fullrun_mos2_xmm0604960701_pi300-10000_pass1_cl_src18.gif
[Wed Jan 18 03:03:53 2012] Mean detx,y = (-2074.99, 8905.99) 
[Wed Jan 18 03:03:53 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 18 03:03:58 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 18 03:03:58 2012] Setting source spectrum file to fullrun_mos2_xmm0604960701_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Jan 18 03:03:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604960701_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed Jan 18 03:20:09 2012] Not generating rmf since there are only 76 counts
[Wed Jan 18 03:20:09 2012] rmf not generated due to insufficient counts
[Wed Jan 18 03:30:36 2012] Updating aperture counts using extracted products
[Wed Jan 18 03:30:36 2012] Error reading totcts from fullrun_mos2_xmm0604960701_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Jan 18 03:30:37 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 03:30:37 2012] Using photon index=1.80, rate=0.000737, arf fullrun_mos2_xmm0604960701_pi300-10000_pass1_cl_src18.arf
[Wed Jan 18 03:30:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 18 03:30:37 2012] Updating source flux to 1.6e-14
[Wed Jan 18 03:32:07 2012] Source 18 has fewer than 100.000000 counts, skipping spectral fitting